Black Box SP360A User manual

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax [phone]
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: [e-mail]
Customer
Support
Information
February 2010
MT1000A-85-R4
BL A C K B OX®
Get convenient avalanche diode protection
for your DB25 connections.
Put avalanche diode technology
where you need it.
In-Line Surge Protector, RS-232 (DB25 25-Wire)
SP360A
For installation instructions, turn this page over…
Overview
The SP360A is designed to protect RS-232 interfaces from
power surges using a DB25 connector. It protects all 25 wires.
What’s included
• In-Line Surge Protector
• Specification sheet
Specifications
Application: RS-232
Ground Wire: Yes
Maximum Shunt Capacitance: <30 pF
Peak Pulse Current: 60 amps
Pins Protected: All
Protection Type: Avalanche diode technology
Response Time: <5 ns
Series Resistance: None
Standard Clamping Voltage: 18 volts
Connectors: (1) DB25 M, (1) DB25 F
RoHS: Yes

BL A C K BOX®
FREE, live, 24/7 Tech Support is just 30 seconds away.
724-746-5500 | blackbox.com
Installation Steps
1. Insert it between the data cable and the I/O port of the equipment you wish to protect.
2. Install a protector at the other end of the data cable to protect both connected devices.
CAUTION: You must attach the connector shell to earth/chassis ground through a grounded AC power receptacle to ensure
effective protection.
© Copyright 2010. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box®and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Double Diamond™
is a trademark of BB Technologies, Inc. Any third-party trademarks appearing in this publication are acknowledged to be the property of their respective owners.
SP360A, rev. 1