Black Box LBH3050A User manual

STEP X - Name of Step
24/7 TECHNICAL SUPPORT AT 877.877.2269 OR VISIT BL ACKBOX.COM
LBH3050A, LBH3080A
INDUSTRIAL
SWITCHES
QUICK START GUIDE

STEP 1 - Package Includes
WHAT’S INCLUDED
• (1) LBH3050A OR LBG3080A
INDUSTRIAL SWITCH
• (2) WALLMOUNTING BRACKETS
WITH SCREWS
• (1) DIN RAIL MOUNTING BRACKET
WITH SCREWS
• THIS QUICK START GUIDE

STEP 2A - LBH3050A Hardware Overview
5, 6, 7
1
2
3
4
TABLE 1. LBH3050A COMPONENTS
NUMBER DESCRIPTION
1 6-pin terminal block for power
2Link/Activity LED
3 Speed LED
4(5) RJ-45 connectors
5 Power 1 LED
6 Power 2 LED
7 Power Fail LED

STEP 2B - LBH3080A Hardware Overview
5, 6, 7
1
2
3
4
TABLE 2. LBH3080A COMPONENTS
NUMBER DESCRIPTION
1 6-pin terminal block for power
2Link/Activity LED
3 Speed LED
4(8) RJ-45 connectors
5 Power 1 LED
6 Power 2 LED
7 Power Fail LED

STEP 3 - Connect the Power
POWER CONNECTION STEPS
The LBH3050A and LBH3080A switches
support dual +12 to 48 VDC power inputs
and changes relay status when the power fails.
1. Insert the positive and negative wires
into the V+ and V- contacts on the terminal
block connector.
2. Tighten the wire clamp screws to prevent
the DC wires from loosening.
PWR 2 PWR 1 1 A @ 24 V
V2- V2+ V1- V1+
P-Fail

STEP 4A - DIN Rail Mounting
INSTALLING THE DIN R AIL KIT
Attach the DIN rail bracket to the DIN rail using
the included screws. See Figure A.
++++++
REMOVING THE DIN R AIL KIT
1. Remove the screws from the DIN rail.
2. Lift the switch up and off from the DIN rail.
See Figure B.
++++++
B
A
B
A

STEP 4B - Wallmounting
WALLMOUNTING STEPS
1. Using the included screws, attach
the wallmount brackets to the switch.
2. With the brackets attached, hang the switch
on the nails on the wall.

STEP X - Name of Step
COPYRIGHT 2017 BLACK BOX CORPORATION. ALL RIGHTS RESERVED.