Black Widow Security BW FM 5 User manual

Arm -
The display will show icon
and the animated icon to
confirm arming. Lights will
flash once.
FM 2-WAY TRANSMITTER
Transmitter Operation
ARM/DISARM/PANIC Button - To arm or disarm
the system, press button 1. To activate the panic feature, press
button 1 and hold for three seconds.
START Button - To start the vehicle, press and hold button
2 for two seconds.To shut down the vehicle, press and hold button
2 for two seconds.
CONFIRMATION Button - To check current status of
the system, press button 5.The current status of the system will
be displayed & illuminated on the transmitter.
TRUNK Button - To activate the trunk output, press and
button 3 for two seconds.
AUXILIARY 2 Output - To activate the Aux. 2 output,
press and hold button 4 for two seconds.
1-
2-
3-
4-
5-
Arm/
Disarm
1-2 - Remote Start/Off
2&3 - Clock Set
2&3- Alarm Clock Set
2&3- Remote Start
2&3Timer Set
3 - Trunk Aux.
4 - Aux. 2
5 - Confirm Status
5- Illuminate
5 -Display
Transmitter Indications
Shock Sensor -
The display will show Shock and
flash the animated icon to
indicate shock sensor triggering.
Door -
If a door is opened while the
system is armed, the display will
show .
Hood -
If the hood or trunk is opened while
the system is armed, the icon
will show and the lights will flash.
Panic -
The display will show
when the Arm/Disarm button is
held to enter the Panic mode.
Disarm -
The display will show and
the animated to confirm
disarming. Lights will flash twice.
Trunk -
The display will show and
flash this icon opening to
confirm.
Warn Away -
If the warning stage is triggered,
the icon will flash.

Transmitter Indications Continued
Start -
The display will indicate the
ignition is turned on and the
engine is going to crank.
Set Clock -
Press and hold buttons 2 & 3 for
2 seconds. The transmitter will
beep twice and the display will
show . Change hour by
pressing button 2; change minute
by pressing button 3.Press button #5 (Confirm Status) to set.The
transmitter will play a tune to indicate new time is set.
Engine Run -
When the engine starts and
continues to run, the icon
will be displayed, and the icon
will remain displayed.
Valet Mode -
The display will show to
confirm entering the Valet mode.
Lock (Valet) -
If the doors are locked with the
transmitter in Valet mode, the
display will show to confirm
locking.
Unlock (Valet) -
If the doors are unlocked with
the transmitter inValet mode, the
display will show the icon to
confirm unlock.
Low Battery -
When the transmitter battery
needs replacement, the display
will flash the icon.
Aux. 2 Output -
The display will show to
confirm the Auxiliary 2 Output.
Set Alarm Clock -
Press and hold buttons 2 & 3 until
the transmitter beeps three times
and the alarm clock icon ( )
appears. Confirm the same way as
setting clock.
Turning Off Alarm Clock -
Press and hold buttons 2 & 3 until the transmitter beeps three
times and the alarm clock icon appears. Press transmitter button
1.The icon will disappear and the alarm will be turned off.
Set Start Timer -
Press and hold buttons 2 & 3 until
the transmitter beeps four times
and the fan icon ( ) appears. Set
the start timer the same way as
setting the clock. The fan icon will
remain displayed when set.
Turning Off Start Timer -
Press and hold buttons 2 & 3 until the transmitter beeps four
times and the alarm clock icon appears. Press transmitter button
1.The icon will disappear and the alarm will be turned off.
Continue to hold buttons 2 & 3 to:
Continue to hold buttons 2 & 3 to:
64-FM5 Rev. 1 09-02