Black Widow Security BW FM Net User manual

Arm/Disarm
1-
2 - Remote Start/Off
2&3 - Clock Set
2&3- Alarm Clock Set
2&3- Remote Start
2&3Timer Set
3 - Trunk Aux.
4 - Aux. 2
5 - Confirm Status
5- Illuminate
5 -Display
1- ARM/DISARM/PANIC Button - To arm
or disarm the system, press button 1.To activate the panic
feature, press and hold button 1 for three seconds.
2- START Button - To start the vehicle, press and
hold button 2 for two seconds. To shut down the vehicle,
press and hold button 2 for two seconds.
3- TRUNK/AUX 1 Button - To activate the trunk
output, press and hold button 3 for two seconds.
4- AUXILIARY 2 Output - To activate the Aux.
2output, press and hold button 4 for two seconds.
5- CONFIRMATION Button - To check current
status of the system, press button 5. The current status of the
system will be displayed & illuminated on the transmitter.
Arm -
The display will show
icon and the ani-
mated icon to
confirm arming. Lights
will flash once.
Press
Disarm -
The display will show
and to confirm
disarming the animat-
ed .
Lights will flash twice.
Press
TRANSMITTER OPERATIONS
Transmitter Functions
1
Button 1
FM 2-WAY TRANSMITTER

Transmitter Functions
Engine Run -
When the engine starts and con-
tinues to run, the icon will
be displayed, and the icon will
remain displayed.
Start -
The display will
indicate the ignition is
turned on and the
engine is going to
crank.
Press
Aux. 2 Output -
The display will show
to confirm the
Auxiliary 2 Output.
Press
Trunk -
The display will show
and flash this icon
opening to con-
firm.
Press
Status
Confirmation
Press and Hold to
toggle to the
appropriate feature.
Release at the
desired status func-
tion:
CON - Confirm
Alarm or Remote
Start Status.
AM
Press & Hold
Continue to hold
Button 5:
SND - Transmitter Alert
Tones ON/OFF (Repeating
the cycle and releasing at
SND turns on or off)
Button 3
Button 2
Button 4
Button 5
2
Continue to hold
Button 5:
CHP- Feature not available
Continue to hold
Button 5:
PSV- Feature not available
Continue to hold
Button 5:
LPG- Feature not available

Door -
If a door is opened while the sys-
tem is armed, the display will
show .
Hood -
If the hood or trunk is opened
while the system is armed, the
icon will show and the
lights will flash.
Panic -
The display will show
when the Arm/Disarm button is
held to enter the Panic mode.
Low Battery -
When the transmitter battery
needs replacement, the display
will flash the icon.
Shock Sensor -
The display will show Shock and
flash the animated icon to
indicate shock sensor triggering.
Warn Away -
If the warning stage is triggered,
the icon will flash.
Set Clock -
Press and hold but-
tons 2 & 3 for 2 sec-
onds.The transmitter
will beep twice and
the display will show
. Change
hour by pressing but-
ton 2; change minute
by pressing button 3.
Press button #5 (Confirm Status) to set.The transmitter will
play a tune to indicate new time is set.
Press & Hold
Set Alarm Clock
Press and hold but-
tons 2 & 3 until the
transmitter beeps
three times and the
alarm clock icon
appears. Confirm the
same way as setting
clock.
Turning Off Alarm Clock -
Press and hold buttons 2 & 3 until the transmitter beeps
three times and the alarm clock icon appears. Press transmit-
ter button 1.The icon will disappear and the alarm will be
turned off.
Continue to Hold
Set Start Timer -
Press and hold buttons
2 & 3 until the trans-
mitter beeps four
times and the fan icon
appears. Set the
start timer the same
way as setting the
clock.The fan icon will
remain displayed.
Turning Off Start Timer -
Press and hold buttons 2 & 3 until the transmitter beeps four
times and the alarm clock icon appears. Press button 1.The icon
will disappear and the alarm will be turned off.
Continue to Hold
Buttons 2&3
Transmitter Functions
3
Low Battery Indication
Alarm Trigger Indications

64-FMNET Rev. 2 12-02
Connecting FM 2-way Kit to System Module
4
Valet Mode -
The display will show to
confirm entering the Valet mode.
Lock (Valet) -
If the doors are locked with the
transmitter in Valet mode, the dis-
play will show to confirm
locking.
Unlock (Valet) -
If the doors are unlocked with the
transmitter in Valet mode, the dis-
play will show the icon to
confirm unlock.
Transmitter Functions
Valet Indications