BlackHillsGoldSource 890 User manual

l/rtdre #l oiine {* g{arrt?lilfu q"H finofirq!
MODEL 890 INSTRUCTION MANUAL
Eyeg lasses shop,jewel ry shop, clocks&watch
shop, repair shop, hospital,dental
clin ics, laboratory, electron ic
workshop,office and household use.
tr PLEASE READ THIS INTRODUCTION BEFORE USING
tr KEEP THIS MANUAL FOR REFERENCE

{*--! LJ t *.J
TIME ON/OFF RESET
POWER LIGHT WORK LIGHT
ffi LtD
ffi coNTRoL PANEL
ffi PLASTIC BASKET
SPEGIFICATIONS:
@ srnrNLESS srEEL TANK
@ unx.MARK
ffi wnrcH srAND
ffi nousrNc
ffi powER coRD
ULTRASONIC CLEANER tr
tr AC100-120V 6AHz
LC200-240V 50Hz
tr
T880
890
206xl52Xl32mm
155X95X52rnm 880 5min.auto off
890 0-3Omin.
600m1 1000t5g

O
\W
Glasses,Sun glasses,
Watch chains,
Waterproof watches etc.
Necklaces,Rings,
Earrings,Bracelets etc. Electric shaver heads, Razor blades,Dentures,
Combs,Toothbrushes etc.
wmk
Watch parts,Ancient coins,
B adges,Machine nozzles
etc.
Forks,
Knives,
Spoons,etc.
Pen-heads,Printer-heads,
Inkjet cartridges,
Seals etc.
)ax
n-na
7 r2.-.- p
As ultrasonic waves travel
through the solution in the tank,
they cause alternating high and
low pressures in the solution.
During the low pressure stage,
millions of microscopic bubbles
form and grow.This process is
called "CAVITATION" .
During the high pressure stage,
the bubbles implode releasing
enormous amounts of energy.
They work in all directions,
attacking surface and invading
all recesses and openings.
xx

@GENERAL CLEANING
Use only tap water for general cleaning.The water should immerge
the article to be cleaned,but not exceed "MAX" mark .
CLEANING BY PARTS
For large article ,partly immerse as shown.
EXTENSIVE CLEANING
When the item needs extensive cleaning or disinfecting,use
"ENHANCED CLEANING" first,then replace the water
and add about 5-10m1 ordinary detergent,restart cleaning
for about 3 minutes.
ENHANCED CLEANING
Open the lid,and fill stainless steel tank with water.
Place the article into water.
The article should be submerged well into the
water.However,the water should not exceed the
t'MAx" mark.

880
890
Press the "ON/OFF" button,the green indicator light turns on,
then starts to work,the cleaner will automatically stop working
after 5 minutes,and green light turns off.
For repeat cleanirg, redo the above step. If you need to stop the
cleaner during working, just press the "ON/OFF" button.
Default working time is 300 seconds.
Plug in the cleaner, red indicator light is on and screen displalys 300.
Press "ON/OFF" button, green light turns on and cleaner start working.
It will automatically stop working after 300 seconds,the green light
turns off and display show the default time.
Display turns off after 30 seconds.
Press "TlME"button, there are l8 cycles time choices:
3 00s,3 3 0s,3 60s,540s,720s,900s, 1 8M,2 1M,24M,27M,30M,90S,
I 20S, 1 50S, I 90S,2105,2405,2705.
Press "RESET" button,the time will be reset to last time setting;
press "RESET" again,time will be reset to default 300 seconds.
If you need to stop cleaning during working, press "ON/OFF" button
When cleaning is finished,unplug it and open the lid,then take out
the article.Finally,pour the water from stainless steel tank and wipe
it out.

S WARNING-TO reduce the risk of burns,electrocution,fire or injury to persons
Do not disassemble the
cleaner except for the
authorize d s ervic eman.
Unplug the cleaner before
filling.Do not exceed the
MAX mark.
Do not touch the socket.
with wet hands to reduce
the risk of electrocution.
Use this cleaner properly
as explained in instruction
manual.
Do not use attachments not
recommended by the
manufacturer
Do not fill the tank with
abrasives or corrosive
chemicals.
Do not immerse the cleaner
in water to reduce the risk
of electrocution.
Do not use this cleaner
when sleeping or drowsy.
Never operate this cleaner if
cord or plug is damaged.If it
is not working properly,return
the damaged cleaner to a service
center for examination and
repair.

A DANGER-TO reduce the risk of electrocution
Unplug this cleaner
immediately after
using.
Keep the cleaner in a
safe place to avoid
falling into water or
other liquid.
Do not use while
bathing.
Keep the cleaner away
from heat,and place
it on a dry and level
surface.
The cleaner should never
be left unattended when
plugged in.
Do not immerse the
cleaner into water or
other liquid.
Do not reach for cleaner that has fallen into water.
Unplug immedi ately.
L,

q, Unplug and empty the cleaner after using.
Keep the cleaner in cool and dry place.
Wipe the tank and housing with dry towel.
C€FCE