Blaupunkt Bluebot User manual

Robotic Vacuum Cleaner & Mop
Blaupunkt Bluebot
User Manual
Please keep this user manual in your sight, read it thoroughly and carefully before using this product.

Contents
Safety Instructions........................................................................................1
Product Features...........................................................................................2
Product Components....................................................................................4
Main Body and Accessories............................................................................4
Main Body Diagram/Dust bin..........................................................................5
Roller Brush Kit ...............................................................................................6
Charging Station / Remote Control.................................................................7
Display Panel ..................................................................................................8
Product Operation.........................................................................................9
Battery Charging.............................................................................................9
Starting Up / Standby / Sleep/Power Off.......................................................10
Scheduling.....................................................................................................10
Cleaning Modes ............................................................................................12
Water Tank and Mopping Cloth Usage.........................................................14
Product Maintenance..................................................................................15
Cleaning Side Brushes..................................................................................15
Cleaning Dust Bin and Filters .......................................................................15
Cleaning Sensors and Wheels......................................................................16
Cleaning Charging Poles ..............................................................................16
Cleaning Suction Passage and Dust Sensor................................................16
Cleaning Roller Brush Kit..............................................................................17
Troubleshooting for Error Code for Sensors...........................................18
Troubleshooting for Motors .....................................................................20
Product Specifications ...............................................................................21
Battery Removal ........................................................................................21

1
Safety Instructions
Before using this product, please read the safety instructions and follow all
regular safety precautions.
1. Only authorized technicians can disassemblethe product. Users are not allowed to disassemble or
repair the product.
2. Only use the original battery and power adapter (Model: GQ15-240060-AG) of the product for
charging. Using an unmatched adapter may cause electric shock, fire or product damage.
3. Do not touchthe power cord, plugoradapter with wet hands.
4. Do notusethis product in wet ormoist environment (anyenvironment with liquid), e.g.
Bathroom or laundry.
5. Do not have curtain, or all kinds of wrapping material or part of user’s body wound in thedrive wheels.
6. Before use, clearthe object on thefloor (remove all the fragileobjects andcords, clothing, papers,
loosecables, as well as makesure to lift curtains and drapes offthe floor to avoid any possible
accidents.)
7. Make sure this product is not closeto cigarette ends, lighters,matches orany flammables.
8. Never usethe product to clean combustible or highly volatile liquids, suchas gasoline.
9. Only usethe product indoors; Do not use it outdoors.
10. If the product needs cleaning, clean it after it is fully charged.
11. Do not over-bend or press the flexible cordwith heavy orsharp objects.
12. Do not sit on top of this product or attach an object on thetop of it. Beware of children or pets while
the product is in operationmode.
13. Do not place this product where it is easy to drop off (tables,chairs, etc).
14. Turn off thepower switchduring product transportation or when you don’t need to usethis product for
alongtime.
15. Before charging, checktheadapter and outlet whether these areproperly connected.
16. To avoid tripping, all people in thehouse should be noticed when this product is on.
17. Whendust bin is full, empty it before use.
18. Use this product intemperature from 0℃to 40℃.
19. Do not use this productin high-temperature environment or under baking sunlight for along time.
20. The batterymust be removedfrom the product before it is scrapped.
21. The batteryshould be disposed of properly for safetysake.
22. The adapter must be removedfrom the socket-outlet beforecleaning, maintainingthe applianceor
removingthe battery.
Warning:
When the appliance is to be used by a child, the child must be of 8 years old and above. For persons
with reduced physical, sensory or mental capabilities or lack of experience and knowledge, proper
supervision or instruction should be given concerning use of the appliance in a safe way to help them
understand the hazards involved. Children should not play with the appliance. Cleaning and user
maintenance should not be made by children without supervision.

2
Product Features
Powerful Suction
Suction power of this product is strong enough to ensure that even tiny dust on the floor will be
cleaned thoroughly!
Replaceable Roller Brush kit / Vacuum Suction kit
Main Brush Kit/ Vacuum Suction Kit of this product is replaceable to meet the needs of different users
per various cleaning environments.
Intelligent Suction Adjustment
This product is able to automatically adjust its suction power when different floor environments
are detected. This ability not only makes cleaning more efficient, but also helps to save more
power (up to 30%).
User Friendly Design
Operation is greatly simplified.
Touch the button,and you could start the robot.
Washable Dust bin
Dust bin and filters can be washed by water.
Simply wash dust bin under water after use to
avoid dust blowing in the air to cause a second
Pollution !
Various Cleaning Modes
Four cleaning modes are provided to meet your needs.
1. Auto cleaning mode
The robot will clean your room automatically
and adjust its cleaning behavior based on specific situation.

3
Product Features
2. Spot cleaning mode
When using suction kit, the robot will clean intensively
in a spiral way while it detects a very dirty area.
3. Edge cleaning mode
In this mode, the robot will clean along the wall or obstacles.
4. Scheduling mode
After scheduled, the robot will leave charging Station and start working at scheduled time.

4
Product Components
Main Body and Accessories
NO.
Description
Quantity
1
Main Body
1
2
Charging Station
1
3
Adapter
1
4
Remote Control (battery not included)
1
5
Water Tank and Mopping Cloth each one piece
1
6
HEPA Filter
1
7
Cleaning Brush
1
8
Side Brushes *2 and Spare Brushes *2
4
9
User Manual
1

5
Product Components
Dust Bin
Cover
Bumper
Main Body Diagram
Power Switch
LED display
Touch key
Roller brush component
Bumper strip
Suction component
Left side brush
Bottom cover
Right wheel
Charging socket
Right side brush
Left wheel
Battery cover
Universal wheel
Auto charging pole
Dust bin

6
Product Components
Dust Bin Kit
Roller Brush Kit
HEPA filter
Primary filter
Dust bin
Roller brush coverplate
Handle
Roller brush bushing
HEPA filter shelf
Roller brush holder
Ball bearing
Roller brush
Bearing glusheath

7
Product Components
Note:
A. Install two AAA type batteries into the remote control before use,
B. The big round button in themiddle of the 4 direction buttons, is a blank button without any function.
C. Remove the batteries if the remote control will be left unused for a long period.
D. If you use the remote control near the charging station, the robot may not recognize the command
and may not work.
Charging Station
Remote Control
Top cover
Charging poles
Charging socket
Power indicator

8
Product Components
Display Panel
LED Panel
1. LED panel, it shows the time setting, charging status, and error codes by using
numbers, letters or graphs. : fully charged, : low power, : charging. : suction
passage blocked, : no dust bin.
2. Clean Button
A: Press this button to change from sleep mode to standby mode.
B. In standby mode, press this button and hold it for more than 3 seconds to go into sleep mode.
C: Confirm schedule setting in scheduling mode.
D: Start cleaning in standby mode.
3. Auto homing / number increment button
A: Press this button to increase number in scheduling mode.
B: In other mode, press this button to start auto-homing and charging mode.
4. Zig-zag cleaning / number decrement button
A: Press this button to decrease number in scheduling mode.
B: In other mode, press this button to start zigzag cleaning.
5. Schedule button
Press this button to enter/quit scheduling mode.
6. Edge Cleaning Mode
Press this button to start edge cleaning in Stand by mode.
7. “”Press button for taking out the dust bin.
Press this button to open the top cover and take out the dust bin.

9
Place charging station against the wall and
remove obstacles from within 1 meter at two
sides and about 2 meters in front of the station,
as shown in the right figure.
Product Operation
1. Battery Charging
A. Charging station placement
B. If the robot has been shut down, power on the robot by pressing the power switch at the right
side of the robot for more than 3 seconds.
C. Charge the robot in either way as shown below:
a. Insert the adapter into the robot and the plug at the other end to the power socket as
shown in Fig.a.
b. Press on robot or HOME on remote control to operate the robot to go back
to the charging station for recharging as shown in Fig.b.
Note:
a. When robot is being charged, LED panel will gradually show 1111 from left to right.
b. Once charging is complete, LED panel will show FULL.
c. In the standby status, the robot will broadcast voice ‘Please charge’and LED panel will show
when battery power is low.
d. In the working status, the robot will return to charging station automatically and LED panel will
show when battery power is low .
For extending battery life:
a. Before first use, charge the robot for 12 hours.
b. Charge the robot as soon as battery power is low.
c. The robot will return to charging station automatically when it accomplishes cleaning or battery
power is low.
Fig. a.
Fig. b.

10
Product Operation
d. If the robot is not to be used for a long time, fully charge the battery before use, turn the power
off, remove and store it in a cool, dry place.
e. If the robot is not to be used for more than 3 months, charge the robot for 12 hours, turn the
power off, remove and store it in a cool, dry place.
2. Starting Up / Standby / Sleeping / Power Off
A. Starting up
a. Make sure the power switch is on.
b. In standby mode, press on main body or ON/OFF on remote control to start cleaning.
Note: If robot is in sleep mode, press on main body or ON/OFF on remote control to wake
up the robot from sleep mode, then press again, the robot will start cleaning automatically.
B. Standby
Standby means robot has its power switched on, waiting for the user’s operation. It can be
changed to standby mode by one of the following methods:
a. During robot cleaning, press on main body to enter standby mode.
b. During robot cleaning, press ON/OFF button on remote control to power off the robot.
C. Sleep
In sleep mode, the robot can only be waken up from button on main body or ON/OFF
on remote control. In order to save power, you can turn the robot into sleep mode from
standby mode via either of the following methods:
a. Press on main body and hold it for 3 seconds.
b. Robot will automatically enter sleep mode if no command is received for more than 60
seconds.
3. Scheduling
You can schedule the robot to set it to start cleaning automatically at a certain time every day.
Note: The robot can only be set when it is in standby or charging mode. If the robot is in sleep
mode, press on main body or ON/OFF button on remote control to wake up the robot.
If the robot is in cleaning mode, stop it before scheduling.

11
Product Operation
How to schedule the robot
A. Setting robot clock
a. In standby or charging status, press to start clock-setting. the LED panel will show
the current system time. Then the left two numbers on LED panel will flash. Press
to increase hour or to decrease it.
b. Press to enter minute-setting mode, the right two numbers on LED panel will flash.
Press to increase it or to decrease it.
c. Press again to save the setting, then press to exit (Before the setting is saved, if
press to exit, the current setting will be invalid).
B. Setting the scheduling time
a. In standby or charging status, press and hold it for 3 seconds to start scheduling, then
the left two numbers on LED panel will flash, press to increase hour or
to decrease it.
b. Press to enter minute-setting mode, the right two numbers on LED panel will flash,
press to increase it or to decrease it.
c. Press gain to save the setting, then press to exit (Before the setting is saved,
if press to exit, the current setting will be invalid).
C. Cancel the scheduling
Set the scheduling time to 00:00.
Note:
a. Before scheduling, please set the robot time to be the same with real time.
b. The robot will start cleaning at the schedule time of Robot Clock every day.

12
Product Operation
Cleaning Modes
1. Auto cleaning
In this mode, the robot will clean a room automatically and
adjust its cleaning mode according to environment.
Note: Press on robot or ON/OFF on remote control to
start auto cleaning.
2. Spot cleaning
Under the following situations, the robot will activate spot
cleaning:
1). When it detects a very dirty area.
2). Press SPOT on remote control.
Note: It’s suggested that user select spot cleaning in a very dirty area.
3. Edge cleaning
In cleaning mode, press to enter edge
cleaning mode. The robot will clean along the obstacles.
4. Zig-zag cleaning
The robot will automatically goes into zig-zag cleaning when
it detected it is in an open area . Or press on the
robot.
Note:
Press MODE button on remote control to select cleaning mode:
A. Mode No.1111 shows on robot LED display: spiral cleaning mode;
B. Mode No.2222 shows on robot LED display: auto cleaning mode;
C. Mode No.3333 shows on robot LED display: edge cleaning mode;
D. Mode No.4444 shows on robot LED display: zig-zag cleaning mode;

13
Product Operation
Suction component and Roller brush component can be exchangeable
Either suction component or roller brush component is replaceable. Just install either of them in
appropriate place at the bottom of the robot (as shown in the figure below), the robot will bring up
brilliant cleaning performance.
Suction component
Roller brush component
Left wheel
Left side brush
Battery cover
Universal wheel
Auto charging pole
Right side brush
Bottom cover
Right wheel
Charging socket

14
Product Operation
Water Tank and Mopping Cloth Usage
1. Sticking mopping cloth
To stick mopping cloth on the bottom of water tank as shown in fig 1, make sure the sticking
side and mopping cloth are facing the appropriate sides, and then to stick the mopping cloth on
its sticking side.
2. Fill water tank with water
Take out rubber plug of water tank, fill it with water, and then put back the rubber plug tightly on its
position in case of water leakage.
3. Fit water tank on the robot
Turnover the robot, fix the water tank on the robot bottom, make sure its bolts are firmly, pressed
into the fixing slots.

15
Product Maintenance
1. Cleaning Side Brushes
Clean the side brush when it gets dirty and replace it if it’s damaged. Max life span for side brush
is 12 months.
Note: before replacing side brushes, check and make L/R mark on side brush match with the L/R
mark on the bottom base of the robot.
2. Cleaning Dust Bin and Filters
Empty and clean the dust bin after each use following the steps as shown in the figures below.
Note:
a. Wash the HEPA and primary filter after used for 15~30 days. Max life span for HEPA and primary
filter is 24 months.
b. Reinstall the HEPA and primary filter after they are fully dry.
c. HEPA and primary filter could be replaced if needed.
d. Do not dry the filters under baking sunshine.

16
Product Maintenance
3. Cleaning Sensors and Wheels
Slightly wipe all the sensors and wheels, as marked in figure below, with soft cleaning cloth or tool.
4. Cleaning Charging Poles
Clean the charging poles, as marked in figure below, with soft cleaning cloth or tool.
5. Cleaning Suction Passage and Bust Sensor
Clean the suction passage and dust sensor, as marked in figure below, with soft cleaning cloth or
tool.
Note: Avoid allowing the sensors to get wet by water, thinner, etc.

17
Product Maintenance Kit
6. Cleaning Roller Brush
Take out and disassemble the roller brush kit as shown in figure below, and clean it with soft
cleaning cloth or tool. (The roller brush axle can be washed by water)
Note: Please re-install the roller brush axle after it is fully dry.

18
Troubleshooting
Error Code for Sensors
Error code
Cause
Solution
AUBF
Suction passage blocked
Clean suction passage
AUBN
Dust bin not well located or robot without dust bin
Put back dust bin and place it in position
E1xx
Left collision switch fault
Check sensitivity of the front bumper
E2xx
Right collision switch fault
E3xx
Left and right collision switch fault
E4xx
Left wheel off the ground
Put robot on solid ground
E5xx
Left wheel off the ground, left collision switch fault
Put robot on solid ground and check front
bumper
E6xx
Left wheel off the ground, right collision switch fault
E7xx
Left wheel off the ground, left and right collision
switch fault
E8xx
Right wheel off the ground
Put robot on solid ground
E9xx
Right wheel off the ground, left collision switch fault
Put robot on solid ground and check
sensitivity of the front bumper
Eaxx
Right wheel off the ground, right collision switch
fault
Ebxx
Right wheel off the ground, left and right collision
switch fault
Ecxx
Left and right wheel off the ground
Put robot on solid ground
Edxx
Left and right wheel off the ground, left collision
switch fault
Put robot on solid ground and check
sensitivity of the front bumper
Eexx
Left and right wheel off the ground, right collision
switch fault
Efxx
Left and right wheel off the ground, left and right
collision switch fault
Exx1
Left anti-drop sensor detect cliff
Clean bottom anti-drop sensor
Exx2
Front anti-drop sensor detect cliff
Exx3
Left and front anti-drop sensor detect cliff
Clean front sensor lens and bottom
anti-drop sensor lens
Exx4
Right anti-drop sensor detect cliff
Clean bottom anti-drop sensor
Exx5
Left and right anti-drop sensor detect cliff
Exx6
Front and right anti-drop sensor detect cliff
Clean front sensor lens and bottom
anti-drop sensor lens
Exx7
Front, left and right anti-drop sensor detect cliff
Exx8
Front bumper right infrared sensors detect obstacle
Clean front bumper sensor lens