Bliss GRAVITY FREE RECLINER User manual

MADE IN CHINA
Max Weight Capacity: 350 LBS (158.8 KGS)
GRAVITY FREE RECLINER INSTRUCTIONS
Moving parts under armrest
while reclining. do not put
your hands under armrest
while in motion.
To unfold recliner, you may need to release the locking system. If you purchased a recliner with a canopy, the canopy should be snapped
to the frame, on the back of the recliner. NOTE: Some models may not have a canopy and/or drink tray. Recliner pictured may differ from
the model you purchased. The illustrations below are for reference only and your recliner may appear different than illustrated.
1234
57
89
To release the locking
system, lift lever on both
sides of the recliner
6
Before closing recliner, make
sure the locks are unlocked.
How to adjust lock tension, if needed.
TROUBLESHOOTING
To adjust the lock tension, it is recommended to
use a socket wrench with a drive socket size of
1/2 in (13mm) and a 1/4 in slotted screwdriver.
Use a socket wrench to tighten or loosen the
recliner lock nut to the desired tension. Turn to
right to tighten, left to loosen. The locks must be
loose in order for the recliner to lock porperly.
Once the desired tension of the lock nut is
reached, pop the plastic caps back in to cover
the nuts. To lock the recliner, move the lever
down. To unlock the recliner, move the lever up.
Remove the plastic
caps covering each
nut of the recliner
lock using a 1/4”
slotted screwdriver.
1
2
Unlock the two locking mechanisms that
are under the armrests before folding your
recliner. If recliner is folded with out doing
so, the locking mechanism will wear.
ATTENTION
Make sure your recliner is completely
unfolded before sitting in. Please be
careful reclining while sitting in it. Body
shape and weight will affect the way this
recliner operates. Be careful and
proceed with caution. To reduce the risk
of injury, DO NOT play on, stand, or jump
on the recliner. The recliner is intended
for sitting and reclining only.

IF YOU PURCHASED A GRAVITY FREE RECLINER WITH A PILLOW, SEE BELOW FOR INSTALLATION INSTRUCTIONS. PLEASE NOTE
THAT THE RECLINER, AND/OR PILLOW PICTURED BELOW MAY DIFFER IN STYLE AND/OR COLOR FROM WHAT YOU HAVE PURCHASED.
BUNGEE CORD SHOULD BE IN A PLASTIC BAG
WITHIN THE PLASTIC BAG CONTAINING THE PILLOW
ATTACHING THE PILLOW
Make sure the flat part of the
pillow is resting above the snap
holders and flat against the
fabric of the chair. Thread other
end of bungee cord through the
pillow’s eyelid.
Thread bungee cord
through eyelid of pillow.
Make sure canopy is unsnapped
and brought to front of chair.
Bring pillow around the front
123