Blizzard Lighting pixellicious User manual

Blizzard Lighting, LLC
www.blizzardlighting.com
Waukesha, WI USA
Copyright (c) 2015

Page 2
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
TABLE OF CONTENTS
Pixellicious™ 1
1. Getting Started 3
What’s In The Box? 3
Getting It Out Of The Box 3
Powering Up! 3
Getting A Hold Of Us 3
Safety Instructions (Don’t Stick Your Hand In The Toaster!) 4
2. Meet Pixellicious™ 5
Main Features 5
DMX Quick Reference 5
The Pixellicious™ Pin-up Picture 6
Rear Connections 6
3. Setup 7
Fuse Replacement 7
Clear/Frost Filter Installation 7
Data/DMX Cables 7
Cable Connectors 8
Mounting & Rigging 8
Series Attachment 8
Fixture Linking (Master/Slave Mode) 9
Mounting & Rigging 9
Transverse Mounting 9
Vertical Mounting 9
4. Operating Adjustments 10
Navigating The Control Panel 11
Control Panel Menu Structure 11
DMX Mode 11
Master/Slave Mode 11
Sound Active Mode 11
Standalone (Program) Mode 11
DMX Channel Values In-Depth 12
Troubleshooting 14
Dimensional Drawings 17
5. Appendix 15
A Quick DMX Lesson 15
Art-net™ Protocol 15
ArKaos Kling-Net™ 15
Keeping Your Pixellicious™ As Good As New 16
Returns (Gasp!) 16
Shipping Issues 16
Tech Specs 17

Page 3
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
• 1 x Pixellicious™ Professional LED Fixture
• 1 x Clear Filter
• An Ever-So-Handy Power Cord
• This Lovely User Manual
Getting It Out Of The Box
Congratulations on your purchase of the super delicious, Pixellicious™ pixel mapping
LED bar! So, now that you’ve got your Pixellicious™ (or hopefully, Pixelliciouses!), you
should carefully unpack the box and check the contents to ensure that all parts are
present and in good condition. If anything looks as if it has been damaged in transit,
notify the shipper immediately and keep the packing material for inspection. Again,
please save the carton and all packing materials. If a xture must be returned to the
factory, it is important that the xture be returned in the original factory box and pack-
ing.
Powering Up!
All xtures must be powered directly off a switched circuit and cannot be run off a
rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used solely for a 0% to 100% switch.
AC Voltage Switch - Not all xtures have a voltage select switch, so please verify that
the xture you receive is suitable for your local power supply. See the label on the
xture or refer to the xture’s specications chart for more information. A xture’s
listed current rating is its average current draw under normal conditions. Check the
xture or device carefully to make sure that if a voltage selection switch exists that it is
set to the correct line voltage you will use.
Warning! Verify that the voltage select switch on your unit matches the line
voltage applied. Damage to your xture may result if the line voltage applied
does not match the voltage indicated on the voltage selector switch. All
xtures must be connected to circuits with a suitable Ground (Earthing).
Getting A Hold Of Us
If something is wrong, please just visit our website at www.blizzardlighting.
com and open a support ticket. We’ll be happy to help, honest.
Blizzard Lighting
N16 W23390 Stoneridge Dr. Suite E
Waukesha, WI 53188 USA
www.blizzardlighting.com
414-395-8365
Disclaimer: The information and specications contained in this document are subject
to change without notice. Blizzard Lighting™ assumes no responsibility or liability
for any errors or omissions that may appear in this user manual. Blizzard Lighting™
reserves the right to update the existing document or to create a new document to
correct any errors or omissions at any time. You can download the latest version of this
document from www.blizzardlighting.com.
Author: Date: Last Edited: Date:
J. Thomas 1/19/2014 J. Thomas 1/22/2014

Page 4
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
SAFETY INSTRUCTIONS
• Please keep this User Guide for future use. If you sell the unit to someone
else, be sure that they also receive this User Guide.
• ALWAYS make sure that you are connecting to the proper voltage, and that
the line voltage you are connecting to is not higher than that stated on the de-
cal or rear panel of the xture.
• This product is intended for indoor use only.
• To prevent risk of re or shock, do not expose xture to rain or moisture.
• Make sure there are no ammable materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least
20in (50cm) from adjacent surfaces. Be sure that no ventilation slots are
blocked.
• ALWAYS disconnect from the power source before servicing or replacing fuse
and be sure to replace with same fuse size and type.
• ALWAYS secure xture using a safety chain. NEVER carry the xture by its
cord. Use its carrying handles.
• DO NOT operate at ambient temperatures higher than 104°F (40°C).
• In the event of a serious operating problem, stop using the unit immediately.
NEVER try to repair the unit by yourself. Repairs carried out by unskilled people
can lead to damage or malfunction. Please contact the nearest authorized tech-
nical assistance center. Always use the same type spare parts.
• NEVER connect the device to a dimmer pack.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Avoid direct eye exposure to the light source while it is on.
Caution! There are no user serviceable parts inside the unit. Do not
open the housing or attempt any repairs yourself. In the unlikely event
your unit may require service, please visit www.blizzardlighting.com/
tickets to request support via our online support ticket system.

Page 5
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
2. MEET THE PIXELLICIOUS™ LED FIXTURE
MAIN FEATURES
• Easy-to-use pixel mapping and video one-meter bar
• 160* (tri-color) SMD 5050 LEDs, 50,000 hours
• Control each using Art-Net™ (3.0 compliant) or ArKaos Kling-Net
• Works great with ArKaos Media Master Express for easy plug-n-play
• Create vertical effects with hardware linking system
• Wide viewing angle and excellent color rendering
• 29 built-in programs, auto (mix) mode + sound active
• Link up to four in-lines with network cables or create vertical effects with
hardware linking system
• Easily manage conguration and software updates with the network-based
remote web server
ADDITIONAL FEATURES
• High-performance fanless convection cooling
• Mounting bracket with dual locking knobs for positioning exibility
• RJ45 Ethernet in/out data connections
• 3-pin male input and 3-pin female output
• PowerCon™ compatible AC power In/Out connectors
DMX Quick Reference - 8/35 Channel Modes
Channel 8-Channel 35-Channel
1 Dimmer Dimmer
2 Strobe Strobe
3 Red Intensity Red Section 1
4 Green Intensity Green Section 1
5 Blue Intensity Blue Section 1
6 Auto Programs 1-15 Red Section 2
7 Auto Programs 16-29 Green Section 2
8 Speed (slow <-> fast) Blue Section 2
9-32 --- R/G/B Sections 3-10
33 --- Auto Programs 1-15
34 --- Auto Programs 16-29
35 --- Speed (slow <-> fast)
DMX Quick Reference - 480-Channel Mode
Channel 480-Channel
1 LED 1 - Red Intensity
2 LED 1 - Green Intensity
3 LED 1 - Blue Intensity
4-480 Individual R/G/B LED Control (2-160)

Page 6
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
Figure 1: The Pixellicious™ Pin-Up Picture
160* (tri-color) SMD
5050 LEDs
Mounting Bracket with
Adjustment / Locking Knobs
Figure 2: The Rear Connections
1. RJ45 Out 3. Power Out 5. LCD Menu 7. DMX Out
2. DMX Out 4. Hanging Bracket 6. RJ45 In 8. Power Out
1
5
2
3
4
8
6 7

Page 7
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
3. SETUP
Fuse Replacement
CAUTION! This xture utilizes a high-output switch-mode power supply with
an internal fuse. Under normal operating conditions, the fuse should not require
replacement. Should your Pixellicious™ fuse require replacement, please con-
tact Blizzard Lighting for instructions, or to return your unit for service.
Clear/Frost Filter Installation:
The Pixellicious™ includes a frost lter already installed. Follow the procedure below to
install the clear lter.
1. Locate the end cap of the product that does not have the connecting hardware.
2. Remove the 4 screws from the end cap of the product.
3. Remove/install lter (frost lter with the shiny side facing toward the LEDs).
4. Re-install the end cap.
Data/DMX Cabling
To link xtures together you’ll need data cables. You should use data-grade cables that can
carry a high quality signal and are less prone to electromagnetic interference.
End Cap
AC Power Out
DMX Out
Art-Net/PC Out
Signal/Power Inputs

Page 8
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
Mounting & Rigging
This xture may be mounted in any SAFE position provided there is
enough room for ventilation.
It is important never to obstruct the vents pathway. Mount the xture
using a suitable “C” or “O” type clamp. The clamp should be rated to
hold at least 10x the xture’s weight to ensure structural stability. Do
not mount to surfaces with unknown strength, and ensure properly
“rated” rigging is used when mounting xtures overhead.
Series Attachment
Pixellicious™ xtures can be attached in an end-to-end formation to
create a strip up to 2 meters long from just one rigging point. Do not
connect any more than a total of 2 in a row when hanging vertically.
1. Loosen the fastening knob and wing nut.
2. Slide the connecting bracket out till it stops and tighten the wing
nut.
3. Slide the Pixellicious™ into the connecting bracket and tighten the
fastening knob, then attach the safety cable.
Fastening Knob
Wing Nut
1 2
3

Page 9
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
Transverse Mounting
These xtures can be also be attached in a side-by-side formation by
connecting the xtures together as shown in the diagram below.
Vertical Mounting
1. Attach the clamp to the mount-
ing bracket.
2. Attach the clamp to the desired
structure or surface.
3. Attach a safety cable to the
product’s safety loop.
*Never attach more than 2 xtures together
when hanging vertically.
When hanging 2 xtures verti-
cally, attach a safety cable from the
safety loop of the top xture to the
bracket of the lower xture.

Page 10
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
4. OPERATING ADJUSTMENTS
The Control Panel
All the goodies and different modes possible with the Pixellicious™ are
accessed by using the control panel on the rear of the xture. There
are 4 control buttons below the LCD display which allow you to navi-
gate through the various control panel menus.
<MENU>
Is used to navigate to the previous higher-level menu item.
<ENTER>
Is used to select and conrm/store the current selection.
<UP>
Scrolls through menu items and numbers in ascending order.
<DOWN>
Scrolls through menu items and numbers in descending order.
The control panel LED display shows the menu items you select from
the menu map on page #11. When a menu function is selected, the
display will show immediately the rst available option for the selected
menu function. To select a menu item, press <ENTER>.
Use the <UP> and <DOWN> buttons to navigate the menu options.
Press the <ENTER> button to select the menu function currently dis-
played, or to enable a menu option. To return to the previous option or
menu without changing the value, press the <MENU> button.
Menu Enter Up Down
DMX CH Mode
Addr: 001 [35CH]

Page 11
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
Control Panel Menu Structure
DMX Address 001-512 To choose the DMX address
DMX CH Mode 8CH 8-channel DMX mode
35CH 35-channel DMX mode
480CH 480-channel DMX mode
Auto Mode Speed Speed adjustments (1-9)
Program Built-in programs (1-29) + Mix Mode
Slave Mode Yes/No Sets xture to run in slave mode
Sound Mode Yes/No Sound active mode
Network Settings IP Address IP address settings
Subnet Mask Subnet mask settings
Net Subnet Unive Net subnet universe settings
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Change the Starting DMX Channel:
1.) The default DMX channel appears as 001 on the LCD readout. To select a different starting
DMX channel, use the <UP/DOWN> buttons to navigate to DMX Address, and press the
<ENTER> button. Then use the he <UP/DOWN> buttons to select a value ranging from 001-
512, and press the <ENTER> to conrm your choice.
Setting the DMX Channel Mode:
1.) To select a DMX channel mode, use the <UP/DOWN> buttons to navigate to DMX CH
Mode, and press the <ENTER> button. Then use the <UP/DOWN> buttons until the display
reaches your desired channel mode. Press the <ENTER> button to conrm.
Slave Mode:
1.) To set a xture to run in slave mode, use the <UP/DOWN> buttons to navigate to Slave
Mode, and press the <ENTER> button. Then use the <UP/DOWN> buttons to highlight
either Yes or No. Press the <ENTER> button to conrm your choice.
Stand-Alone, & Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.
Auto Mode:
1.) To run any of the xture’s individual programs or all of them in “Mix Mode”, use the <UP/
DOWN> buttons to navigate to Auto Mode, and press the <ENTER> button. You can then
adjust the speed setting from 1-9 (slow <-> fast), or press the <UP/DOWN> buttons to
navigate to Program to select any of its 29 programs, or Mix Mode to cycle through them all.
Press the enter button to conrm your choice.
Sound Active Mode:
1.) To use sound active mode, select Sound Mode from the main menu then press the
<ENTER> button. Sound active will now be actively running, using the currently set auto
program or Mix Mode.

Page 12
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
DMX Values In-Depth (8-Channel Mode)
Channel Value What It Does
1 000 <--> 255 Dimmer (0% <--> 100%)
2 000 <--> 255 Strobe (Slow <--> Fast)
3 000 <--> 255 Red Intensity (0% <--> 100%)
4 000 <--> 255 Green Intensity (0% <--> 100%)
5 000 <--> 255 Blue Intensity (0% <--> 100%)
6 000 <--> 255 Auto Programs (1-15)
7 000 <--> 255 Auto Programs (16-29) + Mix Mode
8 000 <--> 255 Auto Program Speed (Slow <--> Fast)
DMX Values In-Depth (35-Channel Mode)
Channel Value What It Does
1 000 <--> 255 Dimmer (0% <--> 100%)
2 000 <--> 255 Strobe (Slow <--> Fast)
3 000 <--> 255 Section 1 Red Intensity (0% <--> 100%)
4 000 <--> 255 Section 1 Green Intensity (0% <--> 100%)
5 000 <--> 255 Section 1 Blue Intensity (0% <--> 100%)
6 000 <--> 255 Section 2 Red Intensity (0% <--> 100%)
7 000 <--> 255 Section 2 Green Intensity (0% <--> 100%)
8 000 <--> 255 Section 2 Blue Intensity (0% <--> 100%)
9 000 <--> 255 Section 3 Red Intensity (0% <--> 100%)
10 000 <--> 255 Section 3 Green Intensity (0% <--> 100%)
11 000 <--> 255 Section 3 Blue Intensity (0% <--> 100%)
12 000 <--> 255 Section 4 Red Intensity (0% <--> 100%)
13 000 <--> 255 Section 4 Green Intensity (0% <--> 100%)
14 000 <--> 255 Section 4 Blue Intensity (0% <--> 100%)
15 000 <--> 255 Section 5 Red Intensity (0% <--> 100%)
16 000 <--> 255 Section 5 Green Intensity (0% <--> 100%)
17 000 <--> 255 Section 5 Blue Intensity (0% <--> 100%)
18 000 <--> 255 Section 6 Red Intensity (0% <--> 100%)
19 000 <--> 255 Section 6 Green Intensity (0% <--> 100%)
20 000 <--> 255 Section 6 Blue Intensity (0% <--> 100%)
21 000 <--> 255 Section 7 Red Intensity (0% <--> 100%)
22 000 <--> 255 Section 7 Green Intensity (0% <--> 100%)
23 000 <--> 255 Section 7 Blue Intensity (0% <--> 100%)
24 000 <--> 255 Section 8 Red Intensity (0% <--> 100%)
25 000 <--> 255 Section 8 Green Intensity (0% <--> 100%)
26 000 <--> 255 Section 8 Blue Intensity (0% <--> 100%)
27 000 <--> 255 Section 9 Red Intensity (0% <--> 100%)
28 000 <--> 255 Section 9 Green Intensity (0% <--> 100%)
29 000 <--> 255 Section 9 Blue Intensity (0% <--> 100%)
30 000 <--> 255 Section 10 Red Intensity (0% <--> 100%)
31 000 <--> 255 Section 10 Green Intensity (0% <--> 100%)
32 000 <--> 255 Section 10 Blue Intensity (0% <--> 100%)
33 000 <--> 255 Auto Programs (1-15) *ch 1 & 2 must be 000
34 000 <--> 255 Auto Programs (16-29) + Mix *ch 1 & 2 must be 000
35 000 <--> 255 Auto Program Speed (Slow <--> Fast)

Page 13
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
DMX Values In-Depth (480-Channel Mode)
Individual R/G/B Pixel Control Value: 000 <--> 255.
CH LED CH LED CH LED CH LED CH LED CH LED CH LED CH LED
1 1R 61 21R 121 41R 181 61R 241 81R 301 101R 361 121R 421 141R
2 1G 62 21G 122 41G 182 61G 242 81G 302 101G 362 121G 422 141G
3 1B 63 21B 123 41B 183 61B 243 81B 303 101B 363 121B 423 141B
4 2R 64 22R 124 42R 184 62R 244 82R 304 102R 364 122R 424 142R
5 2G 65 22G 125 42G 185 62G 245 82G 305 102G 365 122G 425 142G
6 2B 66 22B 126 42B 186 62B 246 82B 306 102B 366 122B 426 142B
7 3R 67 23R 127 43R 187 63R 247 83R 307 103R 367 123R 427 143R
8 3G 68 23G 128 43G 188 63G 248 83G 308 103G 368 123G 428 143G
9 3B 69 23B 129 43B 189 63B 249 83B 309 103B 369 123B 429 143B
10 4R 70 24R 130 44R 190 64R 250 84R 310 104R 370 124R 430 144R
11 4G 71 24G 131 44G 191 64G 251 84G 311 104G 371 124G 431 144G
12 4B 72 24B 132 44B 192 64B 252 84B 312 104B 372 124B 432 144B
13 5R 73 25R 133 45R 193 65R 253 85R 313 105R 373 125R 433 145R
14 5G 74 25G 134 45G 194 65G 254 85G 314 105G 374 125G 434 145G
15 5B 75 25B 135 45B 195 65B 255 85B 315 105B 375 125B 435 145B
16 6R 76 26R 136 46R 196 66R 256 86R 316 106R 376 126R 436 146R
17 6G 77 26G 137 46G 197 66G 257 86G 317 106G 377 126G 437 146G
18 6B 78 26B 138 46B 198 66B 258 86B 318 106B 378 126B 438 146B
19 7R 79 27R 139 47R 199 67R 259 87R 319 107R 379 127R 439 147R
20 7G 80 27G 140 47G 200 67G 260 87G 320 107G 380 127G 440 147G
21 7B 81 27B 141 47B 201 67B 261 87B 321 107B 381 127B 441 147B
22 8R 82 28R 142 48R 202 68R 262 88R 322 108R 382 128R 442 148R
23 8G 83 28G 143 48G 203 68G 263 88G 323 108G 383 128G 443 148G
24 8B 84 28B 144 48B 204 68B 264 88B 324 108B 384 128B 444 148B
25 9R 85 29R 145 49R 205 69R 265 89R 325 109R 385 129R 445 149R
26 9G 86 29G 146 49G 206 69G 266 89G 326 109G 386 129G 446 149G
27 9B 87 29B 147 49B 207 69B 267 89B 327 109B 387 129B 447 149B
28 10R 88 30R 148 50R 208 70R 268 90R 328 110R 388 130R 448 150R
29 10G 89 30G 149 50G 209 70G 269 90G 329 110G 389 130G 449 150G
30 10B 90 30B 150 50B 210 70B 270 90B 330 110B 390 130B 450 150B
31 11R 91 31R 151 51R 211 71R 271 91R 331 111R 391 131R 451 151R
32 11G 92 31G 152 51G 212 71G 272 91G 332 111G 392 131G 452 151G
33 11B 93 31B 153 51B 213 71B 273 91B 333 111B 393 131B 453 151B
34 12R 94 32R 154 52R 214 72R 274 92R 334 112R 394 132R 454 152R
35 12G 95 32G 155 52G 215 72G 275 92G 335 112G 395 132G 455 152G
36 12B 96 32B 156 52B 216 72B 276 92B 336 112B 396 132B 456 152B
37 13R 97 33R 157 53R 217 73R 277 93R 337 113R 397 133R 457 153R
38 13G 98 33G 158 53G 218 73G 278 93G 338 113G 398 133G 458 153G
39 13B 99 33B 159 53B 219 73B 279 93B 339 113B 399 133B 459 153B
40 14R 100 34R 160 54R 220 74R 280 94R 340 114R 400 134R 460 154R
41 14G 101 34G 161 54G 221 74G 281 94G 341 114G 401 134G 461 154G
42 14B 102 34B 162 54B 222 74B 282 94B 342 114B 402 134B 462 154B
43 15R 103 35R 163 55R 223 75R 283 95R 343 115R 403 135R 463 155R
44 15G 104 35G 164 55G 224 75G 284 95G 344 115G 404 135G 464 155G
45 15B 105 35B 165 55B 225 75B 285 95B 345 115B 405 135B 465 155B
46 16R 106 36R 166 56R 226 76R 286 96R 346 116R 406 136R 466 156R
47 16G 107 36G 167 56G 227 76G 287 96G 347 116G 407 136G 467 156G
48 16B 108 36B 168 56B 228 76B 288 96B 348 116B 408 136B 468 156B
49 17R 109 37R 169 57R 229 77R 289 97R 349 117R 409 137R 469 157R
50 17G 110 37G 170 57G 230 77G 290 97G 350 117G 410 137G 470 157G
51 17B 111 37B 171 57B 231 77B 291 97B 351 117B 411 137B 471 157B
52 18R 112 38R 172 58R 232 78R 292 98R 352 118R 412 138R 472 158R
53 18G 113 38G 173 58G 233 78G 293 98G 353 118G 413 138G 473 158G
54 18B 114 38B 174 58B 234 78B 294 98B 354 118B 414 138B 474 158B
55 19R 115 39R 175 59R 235 79R 295 99R 355 119R 415 139R 475 159R
56 19G 116 39G 176 59G 236 79G 296 99G 356 119G 416 139G 476 159G
57 19B 117 39B 177 59B 237 79B 297 99B 357 119B 417 139B 477 159B
58 20R 118 40R 178 60R 238 80R 298 100R 358 120R 418 140R 478 160R
59 20G 119 40G 179 60G 239 80G 299 100G 359 120G 419 140G 479 160G
60 20B 120 40B 180 60B 240 80B 300 100B 360 120B 420 140B 480 160B

Page 14
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
Troubleshooting
Symptom Solution
No Light Output Check to ensure xture is operating under correct mode, IE
sound active/auto/DMX/Etc., if applicable.
Chase Speed Too Fast/
Slow
Check to ensure proper setup of speed adjustment.
No Power Check AC cord and circuit for malfunction.
Blown Fuse Check AC cord and circuit for damage, verify that mov-
ing parts are not restricted and that unit’s ventilation is not
obstructed
Slow Movement Check that speed channels are set appropriately.
No Response to Audio Verify that the xture is in “Sound Active” mode.
Fixture Not Responding
/ Responding Erratically
Make sure all connectors are seated properly and securely.
Use Only DMX Cables and/or check cables for defects
Install a Terminator.
Reset xture(s).
Fixture Moving On Its
Own
Verify proper mode of operation. Is the xture in “Auto”
mode?
If your problem persists or isn’t listed, please open a support ticket online at:
www.blizzardlighting.com/support.
2.4” (64.5mm)
3.94” (100mm)
39.4” (1000mm)
2.2” (55mm)
4.5” (114.8mm) 5” (127.3mm)
4.2” (107mm)
Dimensional Drawings

Page 15
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
5. APPENDIX
A Quick Lesson On DMX
DMX (aka DMX-512) was created in 1986 by the United States Institute for Theatre Technology (USITT)
as a standardized method for connecting lighting consoles to lighting dimmer modules. It was revised in
1990 and again in 2000 to allow more exibility. The Entertainment Services and Technology Association
(ESTA) has since assumed control over the DMX512 standard. It has also been approved and recognized
for ANSI standard classication.
DMX provides up to 512 control “channels” per data link. Each of these channels was originally intended
to control lamp dimmer levels. You can think of it as 512 faders on a lighting console, connected to 512
light bulbs. Each slider’s position is sent over the data link as an 8-bit number having a value between
0 and 255. The value 0 corresponds to the light bulb being completely off while 255 corresponds to the
light bulb being fully on.
DMX is connected using a daisy-chain conguration where the source connects to the input of the rst
device, the output of the rst device connects to the input of the next device, and so on. The standard
allows for up to 32 devices on a single DMX link.
Each receiving device typically has a means for setting the “starting channel number” that it will respond
to. For example, if two 6-channel xtures are used, the rst xture might be set to start at channel 1 so
it would respond to DMX channels 1 through 6, and the next xture would be set to start at channel 7 so
it would respond to channels 7 through 12.
The greatest strength of the DMX communications protocol is that it is very simple and robust. It in-
volves transmitting a reset condition (indicating the start of a new “packet”), a start code, and up to 512
bytes of data. Data packets are transmitted continuously. As soon as one packet is nished, another can
begin with no delay if desired (usually another follows within 1 ms). If nothing is changing (i.e. no lamp
levels change) the same data will be sent out over and over again. This is a great feature of DMX -- if for
some reason the data is not interpreted the rst time around, it will be re-sent shortly.
Not all 512 channels need to be output per packet, and in fact, it is very uncommon to nd all 512 used.
The fewer channels are used, the higher the “refresh” rate. It is possible to get DMX refreshes at around
1000 times per second if only 24 channels are being transmitted. If all 512 channels are being transmit-
ted, the refresh rate is around 44 times per second.
Art-net™ Protocol
Art-Net is a protocol for transmitting the lighting control protocol DMX512-A (with RDM) over the User
Datagram Protocol of the Internet Protocol suite. The protocol was developed by Wayne Howell and his
company, Artistic Licence Engineering (UK) Ltd, is open for implementation with attribution but without
charge, and made available as a software development kit for convenience. It is typically implemented
as lighting-control nodes in embedded controllers, driven from a lighting desk or similar software operat-
ing as a server. Art-Net compatible products are made available by dozens of companies.
ArKaos Kling-Net™
ArKaos has designed the Kling-Net protocol to allow the distribution of real-time video data to remote
display devices, such as LEDs or LED panels, over Ethernet.
Many rst time users are afraid of using LED lighting because of the complexity of networking and con-
trol issues. Using and networking LED lighting has required a high level of technical knowledge which has
been a deterrent for many.
ArKaos wanted to remove all this complexity and replace it with an easy protocol which automatically
takes care of the magic numbers for the user!
The purpose of Kling-Net is:
• To allow the automatic conguration and connection of display devices to a computer
• To add some ‘intelligence’ into display devices, which enables auto conguration
• To ensure a perfect time synchronization of multiple display devices
• To avoid using expensive hardware video converters to send video to display devices
• To allow the creation of an heterogenic network of display devices from different manufacturers, which
can all be controlled from one computer

Page 16
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
Keeping Your Pixellicious™ As Good As New
The xture you’ve received is a rugged, tough piece of pro lighting equip-
ment, and as long as you take care of it, it will take care of you. That said, like
anything, you’ll need to take care of it if you want it to operate as designed.
You should absolutely keep the xture clean, especially if you are using it in an
environment with a lot of dust, fog, haze, wild animals, wild teenagers or spilled
drinks.
Cleaning the optics routinely with a suitable glass cleaner will greatly improve
the quality of light output. Keeping the fans free of dust and debris will keep
the xture running cool and prevent damage from overheating.
In transit, keep the xtures in cases. You wouldn’t throw a prized guitar,
drumset, or other piece of expensive gear into a gear trailer without a case,
and similarly, you shouldn’t even think about doing it with your shiny new light
xtures.
Common sense and taking care of your xtures will be the single biggest thing
you can do to keep them running at peak performance and let you worry about
designing a great light show, putting on a great concert, or maximizing your cli-
ent’s satisfaction and “wow factor.” That’s what it’s all about, after all!
Returns (Gasp!)
We’ve taken a lot of precautions to make sure you never even have to worry
about sending a defective unit back, or sending a unit in for service. But, like
any complex piece of equipment designed and built by humans, once in a while,
something doesn’t go as planned. If you nd yourself with a xture that isn’t
behaving like a good little xture should, you’ll need to obtain a Return Authori-
zation (RA).
Don’t worry, this is easy. Just go to our website and open a support ticket at
www.blizzardlighting.com/tickets, and we’ll issue you an RA. Then, you’ll need
to send the unit to us using a trackable, pre-paid freight method. We suggest
using USPS Priority or UPS. Make sure you carefully pack the xture for transit,
and whenever possible, use the original box & packing for shipping.
When returning your xture for service, be sure to include the following:
1.) Your contact information (Name, Address, Phone Number, Email address).
2.) The RA# issued to you
3.) A brief description of the problem/symptoms.
We will, at our discretion, repair or replace the xture. Please remember that
any shipping damage which occurs in transit to us is the customer’s responsibil-
ity, so pack it well!
Shipping Issues
Damage incurred in shipping is the responsibility of the shipper, and
must be reported to the carrier immediately upon receipt of the items.
Claims must be made within seven (7) days of receipt.

Page 17
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
Tech Specs!
Weight & Dimensions
Width 39.4 inches (1000 mm)
Depth 4.2 inches (107 mm)
Height 4.6 inches (117 mm)
Weight 7.6 lbs. (3.5 kg)
Power
Operating Voltage 100-240VAC, 50-60 Hertz
Power Consumption 51w, 0.36A
Light Source
LED 160 LEDs (tri-color) SMD 5050, 50,000 hours life expec-
tancy
Optical
Beam Angle 120 degree beam
Luminance Clear Filter Frosted Filter
2586 NITS 2160 NITS
Pixels 40 x 4
Pixel Pitch 25mm
Thermal
Max. Operating
Temp.
104 degrees F (40 degrees C) ambient
Control
Protocol Art-Net™, Kling-Net, USITT DMX-512
DMX Channels 8/35/480-Channels
Artnet Channels 480-Channels
Input/Output 3-pin XLR Male/Female
Other Operating
Modes Standalone, Master/Slave, Auto, Sound Active
Other Information
I wish this message had one more word. There.
Warranty
2-year limited warranty, does not cover malfunction
caused by damage to LEDs.
DISCLAIMER:
The power connector tted to the xture and xture cord are designed for compatibility
with products manufactured by Neutrik AG, Neutrik USA and their related entities, however
they are not manufactured by, afliated with or endorsed by Neutrik AG, Neutrik USA, or
any related entity. Neutrik® and powerCON® are registered trademarks of Neutrik AG.

Page 18
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
This page intentionally left blank.

Page 19
Pixellicious™ User Manual Rev. A © 2015 Blizzard Lighting, LLC
This page intentionally left blank.

Enjoy your product!
Our sincerest thanks for your purchase!
--The team @ Blizzard Lighting