Blodgett BG2136 Double User manual

BLODGETT OVEN COMPANY
www.blodgett.com
1400 Toastmaster Drive, Elgin, IL USA 60120
Phone: [phone] • Fax: [phone]
MODEL BG2136
Gas Conveyor Oven
EXTERIOR CONSTRUCTION
Stainless steel front, top, sides, and interior
Fully insulated on bottom, top, front, and rear
Easy serviceable access to all components
Front and top surfaces are cool to the touch
Full drop down front window
Aluminized finished steel back
INTERIOR CONSTRUCTION
Stainless steel outer (finger) plates
18” (457mm) wide stainless steel wire mesh conveyor belt
36” (915mm) long bake chamber
Two blower inlets in the plenum for forced air circulation supplying top and bot-
tom air flow
Standard or Customer specific finger set that allows control of 8 heat zones
inside the bake chamber. Finger set consists of manifolds, inner plates, outer
plates and blank plate(s).
OPERATION
Solid state digital controls to display set point and actual bake chamber tem-
perature(s) as well as bake time.
Maximum Temperature is 550 degrees F (one degree increment)
Modulating gas valve maintains accurate bake chamber temperature
Electronic spark ignition control system
Atmospheric type burner
Internal gas pressure regulator
3 – 30 minute bake time (one second increment)
Product clearance 3 ½” (889mm)
Heat transferred through forced directed hot air impingement
Open vented baking chamber
Two blower cooling fans
Easy to clean – no tools required
Project
Item No.
Quantity
Blodgett gas fired conveyor oven with 18” (457mm) wide conveyor belt and
36” (915mm) long baking zone length. Single, double or triple stack models.
All data is shown per oven section, unless otherwise indicated.
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
High speed conveyor (1-10 minute bake time)
76” (1930mm) long conveyor in lieu of standard 60”
(1524) long conveyor
9” (228mm) Twin stainless steel wire mesh conveyor
belt with individually adjustable bake time settings
Stacking kit to properly stack a BG2136 on top of an
existing SG2136G
One year additional extended warranty*
BG2136
STANDARD FEATURES
Energy reduction system provides an efficient heating
system that improves cooking results and saves energy
Impingement deluxe dual air return that improves cook-
ing results and saves energy
Solid state controls
Temperature controller’s built in auto tune feature
improves overall conveyor oven performance
Microprocessor-controlled conveyor speed with motor
feedback
Large front loading door with window and stainless steel
handle
Portable stand (single, double, triple stack ovens)
Stackable to three high
Stainless steel under shelf on single and double stack
ovens
Removable folding conveyor frame and belt assembly
Removable 8” (203mm) shelf extension (entrance end)
Adjustable conveyor belt tension
Field reversible conveyor belt direction
Product stop (exit end)
¾” by 48” coated gas hose, restraint cable, and manual
on/off gas valve
6’ cord with NEMA L6-20P plug (shipped loose)
One year parts and labor warranty
Start Up by our Authorized Service Provider to activate
the warranty (USA and Canada only)*
* For all international markets, contact your local distributor.

DIMENSIONS ARE IN INCHES [MM]
END VIEW
3-1/2
(89)
43-1/2 [1105]
33-3/16 [843]
24 [610]
5-13/16
[148]
SINGLE
11 (280)
Electrical junction box
52-7/8 (1343)
9-1/8
(231)
3-3/8 (86)
Gas inlet
REAR VIEW
51-5/16 [1303]
62-1/2 [1588]
5-13/16
[148]
33 [838]
24-1/2 [622]
DOUBLE
Heat
Guard
69-1/2 [1765]
40 [1016]
58-1/4 [1480]
21-3/4 [552]
12-1/2 [318]
6-11/16
[170]
TRIPLE
Heat
Guards
40 [1016]
37-15/16 [964]
7-11/16 [195]
7/8
[22]
15-1/16 [383]
46 [1169]
20 [508]
36 [914]
60-1/2 [1537]
63-7/16 [1611]
12-3/16
[310]
TOP VIEW
71-7/16 [1815]
Rear
Front
43-3/8 [1102]
BLODGETT OVEN COMPANY
www.blodgett.com • 1400 Toastmaster Drive, Elgin, IL USA 60120 • Phone: [phone] • Fax: [phone]
MODEL BG2136
SHORT FORM SPECIFICATIONS
Provide Blodgett conveyor model BG2136 (gas) conveyor oven. Unit shall shall cook by means of forced, heated air. Unit shall be (single/double/triple) deck. Each deck shall be fully
independent, of stainless steel construction, and fully insulated on all sides. Provide with electronic spark ignition gas fired and baking compartment with two blowers to evenly distrib-
ute heat across baking zone. Conveyor belt shall be single - 18" (457mm) belt constructed of stainless steel wire mesh; baking zone length shall be 36" (915mm). Unit shall be pro-
vided with drop down front window. Control panel shall be solid state with 550°F (288°C) maximum thermostat and LCD display of 3-30 minutes adjustable belt speed. Provide start-
up inspection service by a factory authorized service agent. Provide options and accessories as indicated.
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
APPROVAL/STAMP
P/N M10990 Rev H (5/08)
POWER SUPPLY (must have dedicated ground)
BG2136 208-240 VAC, 50/60 Hz, 1 ph, 6 amp., 2-wire plus ground
This current draw is an average value for normal operation. The initial amper-
age draw on oven start up may exceed the listed value.
MINIMUM ENTRY CLEARANCE:
Uncrated 19-1/2" (495mm)
SHIPPING INFORMATION:
Approx. Weight:
Single 658 lbs. (299 kg)
Double 1255 lbs. (570 kg)
Triple 2449 lbs. (1112 kg)
Crate Size:
BG2136 60" L x 49" W x 42" H (1524 x 1245 x 1067 mm)
DIMENSIONS:
Floor space 60" (1524mm) W x 46" (1069mm) L
Product clearance 3-1/2" (89mm)
Recommended minimum wall clearance
Left and right side 1" (25mm)
Rear 3” (76mm)
Baking zone
Width 18" (457mm)
Length 36" (914mm)
MAXIMUM INPUT: (per section)
BG2136 75,000 BTU/hr
GAS SUPPLY: (specify) Natural Propane
Oven per cavity 3/4" NPT 3/4" NPT
Main gas supply 2" line 1-1/2" line
Minimum gas pressure: 6" W.C. 11" W.C.
Maximum gas pressure: 12" W.C. 14" W.C.
NOTE: Blodgett Oven, in accord with its policy to continually improve its products, reserves the right to change materials or specifications without notice. Such revi-
sions do not entitle the buyer to corresponding changes, improvements, additions, or replacements for previously purchased equipment.