Nuna Zaaz User manual

instruction manual
mode d’emploi

22
1
2
3
4
5
6
Illustrations

33
710
118
129

44
17
15
14
16
18
13

55

66
Smart
Design
We like design.
And people who like design get us.
We will not embarrass your kids.
We cannot promise they will stay clean.
But we know it will all be okay. We are parents.
We are Nuna.

77
EN
Contents
Illustrations 1–3
English (EN) 5
Safety and Recommendations 6
Warnings 7
Contents of the Box 8
How to Assemble the ZAAZ high chair 9–11
How to Use the ZAAZ high chair 12
How to Disassemble the ZAAZ high chair 13–14
Cleaning and Maintenance 15
Warranty and Product Registration 16
Where to Find Nuna Products 17

8
EN
Safety and
Recommendations
Please take note of the following before using the Nuna ZAAZTM high
chair.
Safety is very important to us and you can be assured that our products
comply with the relevant standards.
If you have any questions or comments regarding the ZAAZ high chair, we
will be glad to hear them through our website www.nuna.eu.
8
IMPORTANT!
RETAIN FOR FUTURE
REFERENCE:
READ CAREFULLY.
Read all instructions before assembly and use of the product.
The ZAAZ high chair can be used only when a child can sit upright,
unaided (around 6-7 months).
The ZAAZ high chair is designed to be used by children and not by
adults.

9
EN
9
WARNINGS
Failure to follow these warnings and instructions could
result in serious injury or death.
Prevent serious injury or death from falls or sliding out.
Always secure child in the restraint.
The child should be secured in the ZAAZ high chair
at all times by the restraining system. The tray and
arm bar are not designed to hold the child in the ZAAZ
high chair. It is recommended that the ZAAZ high chair
be used only by children capable of sitting upright
unassisted.
Strangulation Hazard: Do not place the ZAAZ high chair
in any location where there are cords, such as window
blind cords, drapes, phone cords, etc.
Do not use the ZAAZ high chair if any parts are torn,
broken or missing.
Always use the ZAAZ high chair on a level, stable sur-
face.
Never use the arm bar without using the cushion.
Never leave child unattended.

10
EN
Contents of the Box
Check that you have all the parts for this product before assembling it.
Refer to the illustrations provided at the beginning of this manual to
identify each part.
Nuna key
(Harness restraint removal tool)
Tray
Harness restraint 5 pts
Arm bar
Seat cushion
Seat (with flap and height adjustment
lock on reverse side)
Footrest
Leg frame
Tools Needed:
Nuna key to remove harness restraint
when desired (included in the box)

11
EN
How to assemble
the ZAAZ high chair
Check that you have all the parts for this product before assembling it.
The assembly should be performed only by adults.
Assemble Seat onto Leg Frame
Once the seat is attached to the legs of the ZAAZ high chair, it is consid-
ered to be a permanent assembly. However, it is possible to reverse this
assembly if the seat needs to be put into storage or shipped. We recom-
mend this should not be a regular occurrence.
1 Place the leg frame on the floor facing you, as illustrated. (1)
2 From the back of the seat, release the lock by first pulling down on the
latch and then rotating the flap completely forward. (2)
3 Position the seat over the leg frame to line up the slots behind the seat
flap with the white tracks on the leg frame, as illustrated. (3)
4 Once the seat is correctly positioned over the white tracks, keep the flap
up and firmly push the seat downward until you hear a click. If the flap is
not completely up you will not be able to push the seat down.
5 To lock the seat in the desired position, lower the flap and listen for the
click as the seat locks back into position. Continue to push firmly on the
sitting surface until the seat reaches its lowest position.
The seat is now permanently mounted to the legs and can be adjusted
within the range between the highest and lowest positions.

12
EN
Assemble Footrest onto Seat
1 Slide down the lock behind the flap and lift the flap completely. The seat
automatically rises up to its highest position. (2)
2 Attach the footrest on one side of the flap and then flex the footrest to
attach it on the other side. (4)
3 Lower the flap down into position. Listen for the click as the lock clicks
back into position.
Assemble Seat Cushion onto Seat
1 First remove the harness restraint if necessary, then place the seat cush-
ion onto the seat. Refer to “Remove the Harness Restraint”
2 Insert the seat cushion clip into the inner of two holes in the sitting sur-
face and listen for a click.
Assemble Harness Restraint onto Seat
WARNING When used as a high chair, the child
must always wear the harness restraint correctly fitted
and adjusted.
1 Insert waist clips into the lower backrest holes (around the seat cushion,
when cushion is in use) and listen for a click. (5)
2 Insert shoulder harness clips into the upper backrest holes and listen for
a click. (5)
3 Insert the remaining center buckle clip (through the seat cushion, when
cushion is in use) into the inner of two holes in the sitting surface of the
seat and listen for a click. (5)
4 Check that the harness attachment is secure by pulling on each attach-
ment point.

13
EN
Assemble Arm Bar onto Seat
WARNING The arm bar is not intended to
restrain your child; always secure the child with the har-
ness restraint.
1 With the arm bar slightly tilted up, hook the ends of the arm bar into the
holes in the backrest to the right and left of the seating area. (6)
2 Rotate the arm bar down and insert the front center attachment into the
outer slot until it locks in place, listen for the click. (7)
3 Check that the arm bar is secure:
• by pulling out on the front of the arm bar.
• by pulling up on the front center attachment.
Assemble Tray onto Arm Bar
WARNING The tray and the arm bar are not
intended to restrain your child. Always secure the child
with the harness restraint.
1 With the tray slightly tilted up, slide the tray onto the top of the arm bar.
Slide the tray back into the slots. (8)
2 Push the tray down until both side clips fasten around the arm bar and
you hear a “click.” (9)
3 Check that the tray is secure by pulling up and out on the front of the
tray.

14
EN
How to Use the
ZAAZ high chair
Adjusting the Seat Height
WARNING DO NOT adjust the height of the
ZAAZ high chair while a child is in the seat!
1 Slide down the lock behind the flap and lift the flap completely. The seat
automatically rises up to the highest position. (2)
2 To lower the seat, keep the flap lifted completely and push down firmly
on the sitting surface of the seat until it reaches the desired position.
(11)
3 Lower the flap down into position. Listen for the click as the lock clicks
back into position. The seat position is now locked.
Adjust the Harness Restraint and Buckle
1 To release the buckle, push on the “Nuna” button at the center and
remove the two clips. (14)
2 To lock the harness, insert each clip into the buckle and listen for a
click. (15, 16, 17)
3 Don’t forget to check and adjust the harness to fit your child snugly.
(18)

15
EN
How to Disassemble
the ZAAZ high chair
Remove the Tray
1 Release the clip from both sides under the tray. (9)
2 Gently lift the tray upwards so that it clears the arm bar then pull away
from the back of the seat.
Remove the Arm Bar
1 Push the button on the arm bar front center attachment and pull the arm
bar up to release it from the seat. (10)
2 Unhook the two ends from the backrest and remove. (6)
When removing the arm bar for cleaning, ensure that
the arm bar is securely reassembled when placing it
back on the high chair. Refer to “Assemble Arm Bar
onto Seat.”
Remove the Harness Restraint
WARNING When used as a high chair, the child
must always wear the harness restraint correctly fitted
and adjusted.
The harness can be removed for cleaning or when the ZAAZ high chair is
used for an older child.
Insert the Nuna key into each of the slots of the harness restraint at the
back and underside of the seat to release the plastic clips. Pull on the belts
to remove. (12)

16
EN
Remove the Seat Cushion
1 To remove the seat cushion, first remove the tray, the arm bar and the
harness restraint if necessary.
2 Insert the Nuna key into the slot at the underside of the seat to release
the plastic clip.
Remove the Footrest
1 Slide down the lock behind the flap and lift the flap completely. The seat
automatically rises up to the highest position. (2)
2 Firmly flex one end of the footrest and unhook it from the flap. Unhook
the other end and remove it. (4)
3 Remember to lower the flap and listen for the click as the lock clicks
back into position.
Dismantling the Seat from the Leg Frame
Once the seat is attached to the legs of the ZAAZ high chair, it is consid-
ered to be a permanent assembly. However, it is possible to reverse this
assembly if the seat needs to be put into storage or shipped. We recom-
mend this should not be a regular occurrence.
1 Slide down the lock behind the flap and lift the flap completely.
The seat automatically rises up to the highest position. (2)
2 Gently pull forward the two clips on each side, as illustrated. (13)
3 Slide the seat up and remove from the legs. If the flap is not completely
up, you will not be able to slide the seat upwards.

17
EN
Cleaning and
Maintenance
You can clean the ZAAZ high chair and accessories with a damp cloth or a
mild detergent, but do not use abrasive products or solvents which could
damage the material.
The anodised aluminium legs are maintenance free but will be damaged
by impact or scratching.
Continued and extended exposure to sunlight can change the colour of
many materials.
Inspect your ZAAZ high chair regularly in order to detect any damage.

18
EN
Warranty
and Product Registration
For replacement parts or warranty information, please contact customer
service.
In the USA: www.nuna.eu
1-855-NUNA-USA
In Canada: [e-mail]
1-800-667-4111
All products include a serial label which lists the product model number
and serial number. Before contacting customer service, please have these
numbers available for reference.
Thank you for choosing Nuna. This product is covered by a limited one-year
warranty from the date of purchase. If this product shows a defect in materials
or workmanship during the warranty period, please contact Nuna. Please have
the proof of purchase, model number and serial number available when you
contact us.
To register your product, fill out and mail in the provided registration card or
go to our website at www.nuna.eu.

19
EN
Where to Find
Nuna Products?
If you are looking for Nuna retailers in your area, please consult our
website: www.nuna.eu
Contact
We always look forward to hearing from you. Please feel free to contact us
with any comments or questions regarding the Nuna products.
United States:
www.nuna.eu
Nuna Baby Essentials Inc.
70 Thousand Oaks Blvd.
Morgantown, PA 19543
Tel. no.: 1-855-NUNA-USA
Canada:
Distributed in Canada by: ISSI Inc.
2400A Autoroute Transcanadienne
Pointe-Claire (QC) H9R 1B1
T: 514-344-3045 | F: 514-344-3296
[e-mail] | 1-800-667-4111
Thanks for
choosing Nuna!

Conception
intelligente
Nous aimons ce qui est design.
Et ceux qui aiment le design se retrouvent en nous.
Nous n’embarrasserons pas vos enfants.
Nous ne pouvons pas vous garantir
qu’ils resteront propres.
Mais nous savons que tout ira bien. Car nous sommes aussi
des parents.
Nous sommes Nuna.