Blue Guard BG-OIL User manual

Blue Guard systems are compable with 12, 24, or 32 Vdc power.
To download product user manuals, go to: www.bluebgi.com/manuals
BLUE GUARD
INSTALLATION
GUIDE
BG-OIL
Installaon: BG-Oil to BG-AP-2
www.bluebgi.com
Warranty Informaon
Blue Guard Innovaons, LLC 520 Zang Street, Suite 221 Broomfield, Colorado 80021 warrants
to the original consumer purchaser that this product will be free from defects in material and
workmanship, providing that the unit is not opened or otherwise abused for a period of three (3)
years from the date originally purchased unless otherwise noted or sold by the manufacturer.
The exclusive remedy of the consumer purchaser in the event the product is defecve is to
return the product to Blue Guard Innovaons, LLC at the above address, freight prepaid with
original sales receipt. When items are returned and found to be working, or when the warranty
has been voided, the cost of shipping back to the customer will be charged to the customer.
Returned product is considered abandoned property following 30 days with no response to Blue
Guard Innovaons, LLC Customer Service. IMPORTANT: FOR THIS WARRANTY TO BE
EFFECTIVE, the product MUST BE SUPPLIED WITH PROOF OF ORIGINAL PURCHASE DATE
OF THE PRODUCT. THE ACCEPTANCE BY BLUE GUARD INNOVATIONS, LLC OF ANY
PRODUCT RETURNED SHALL NOT BE DEEMED AN ADMISSION THAT SUCH PRODUCT IS
DEFECTIVE OR IN VIOLATION OF ANY WARRANTY. THE COMPANY RESERVES THE RIGHT
TO REPAIR OR REPLACE THE PRODUCT. NO REPRESENTATIVE OR OTHER PERSON IS
AUTHORIZED TO ASSUME FOR BLUE GUARD INNOVATIONS, LLC ANY ADDITIONAL
LIABILITY IN CONNECTION WITH THE SALE OF ITS PRODUCTS OR TO ALTER THIS
WARRANTY IN ANY WAY. IN NO EVENT WILL BLUE GUARD INNOVATIONS, LLC BE LIABLE
FOR MORE THAN THE SALES PRICE OF THE PRODUCT. UNDER NO CIRCUMSTANCES WILL
BLUE GUARD INNOVATIONS, LLC BE LIABLE FOR ANY LOST PROFITS, INCIDENTAL OR
CONSEQUENTIAL COSTS, EXPENSES, OR DAMAGES. THE LIMITATION ON LIABILITY FOR
LOST PROFITS, INCIDENTAL OR CONSEQUENTIAL COST EX- PENSES OR DAMAGES SHALL
SURVIVE ANY FAILURE OF ESSENTIAL PURPOSE OF THIS LIMITED WARRANTY. All wiring on
the vessel shall be performed by a QUALIFIED MARINE ELECTRICIAN and in accordance with
the “Fire Protecon Standard for Motor Cra”, NFPA No. 302. The Standards of the American
Boat and Yacht Council, Inc., and the USCG Safety Standards for Boat Electrical Systems (33 CFR
183). Some states do not allow the exclusive or limitaon of incidental or consequenal
damages, so the above limitaon may not apply to you. NO EXPRESS OR LIMITED WARRANTY,
INCLUDING WARRANTY OF MERCHANTABILITY AND FITNESS SHALL EXTEND FOR ANY
PERIOD OF TIME GREATER THAN THREE (3) YEARS FROM THE DATE OF ORIGINAL
PURCHASE OF THIS PRODUCT. Some states do not allow limitaon on how long an implied
warranty lasts, so the above limitaon may not apply to you. CAUTION - Warranty void if seal on
product is broken or product is tampered with in any way, if any electrical wire is cut back more
than 4 inches, if electrical splices become submerged, or if product is installed contrary to
instrucons or warnings. Blue Guard Innovaons, LLC 520 Zang Street, Suite 221 Broomfield,
Colorado 80021.
All wiring on the vessel shall be performed by a QUALIFIED
MARINE ELECTRICIAN and in accordance with the “Fire
Protecon Standard for Motor Cra”, NFPA No. 302. The
Standards of the American Boat and Yacht Council, Inc., and the
USCG Safety Standards for Boat Electrical Systems (33 CFR 183).
Blue Guard Installaon Guide, LT-6101 BG-Oil | Rev B
General Instrucons Mounng the BG-Oil
• Be sure to read, understand and follow the included
instrucons. Not following the below instrucons may void your
warranty.
• WARNING: Disconnect power from system before installaon.
• Don’t cut more than 4” of wire.
• To keep connecons dry use waterproof adhesive-lined heat
shrink terminals.
• Keep connecons high and away from water or condensing
moisture.
• Use a second layer of waterproof adhesive-lined heat shrink to
completely encapsulate the connecons.
• The negave wire must be connected to a bonded common
ground point, i.e. with the ground point connected to the baery
negave, and situated as close as possible to the baery
negave terminal.
• Install properly rated fuse.
• Ensure that any addional wiring is the appropriate gauge for
the distance and load (Refer to ABYC Standards).
• Seal any unused wires with waterproof adhesive-lined heat
shrink to be protected from water or moisture.
• Aer installaon is complete use the BGI Config App to verify
installaon and test for proper funconality.
• BG-Oil must be mounted horizontally.
• BG-Oil snaps in and out of bracket (shown right).
• Place the BG-Oil in a strategic locaon. For example, in the
engine, fuel or steering compartments where puddling of oil is
most likely to occur.
• The BG-Oil alarm will acvate when oil is detected.
Mounng Bracket
Mount BG-Oil horizontally

Blue Guard systems are compable with 12, 24, or 32 Vdc power.
Installaon: BG-Oil to Third Party Panel (One Amp or Less)
www.bluebgi.com
Installaon: BGI Config App
• The BGI Config App is available on iOS (Apple App Store) or Android
(Google Play Store) devices.
• Aer the BGI Config App is installed open the app and make sure that
Bluetooth is enabled on your device.
• Power on the BG-Oil: You have one minute to access the configuraon
opons before it locks the configuraon. To unlock the configuraon
power cycle the BG-Oil.
• The factory default values are:
• Standard Alarm Mode: Non-latching
• Oil Detecon Sensivity: Medium
Installaon: BG-Oil to Third Party Panel (One Amp or More)