Blue Wave NE122SS Instruction manual

NE122SS STAINLESS STEEL
IN POOLLADDER
ASSEMBLY
AND
INSTALLATION INSTRUCTIONS

Parts Identification
NEP2048
Quantity 8 Each
NEP2042
QUANTITY PART # DESCRIPTION
2 BS SSRAIL STAINLESS STEEL HAND RAIL
4NEP2043 LADDER STEPS
2NEP2048 PIVOT BALLS FOR BASE STEP
1NEP2044 BOTTOM STEP
1NEP2042 HARDWARE BAG
2 BS35998 PLASTIC FLANGES-WHITE
PARTS LIST
STEP 1 Unpack box and check parts against parts list below.
BS SSRAIL
NEP2043 NEP2044 BOTTOM STEP

STEP 2
• Slide 1 of the 4 ladder steps onto one of the
stainless steel handrails. See figure 1
• Make sure that the step treads are facing up.
• If you have any difficulty sliding the step onto the
handrail apply a small amount of oil to the hand-
rail.
• Align the holes in the step with the top set of holes
on the handrail.
• Secure step to handrail with a bolt and nut. Make
sure that the head of the bolt is located on the
outside of the step.
See figure 2
• Slide the second handrail thru the hole on the opposite side
of the step. Secure with a nut and bolt. See figure 2
• Slide the remaining 3 steps onto the handrails and secure
them with nuts and bolts. See figure 3
Figure 1
Figure 3
Figure 2

STEP 4
Figure 4
• Slide 1 pivot ball onto the bottom of each
handrail
• Make sure both pivot balls are securely
fastened to each handrail. See figure 4
Figure 5
• Place the bottom step on the floor facing up
• Hold the ladder assembly straight up and align
the pivot balls with the receivers on the bottom
step.
• Push down firmly until both balls are inserted
into the step. See figure 5
STEP 5
Figure 6
STEP 6
Ladder Placement - Figure 6
• Locate ladder in desired position on deck. (A)
• Make sure base step rests flat against the pool
floor. Swivel step if needed to align with pool
floor. (B)
• Mark location of handrails on deck with a pencil.
• Using a 1 1/2” hole saw, drill 1 hole for each
hand rail through deck surface. (C)
This will ensure that the deck will now support
the ladder.
• Secure hand rails to deck using deck flanges (D)
Slide flanges over each hand rail, insert handrails
through the holes in the deck. Secure flanges to
deck with screws. Secure flange to handrail using
set screw.
B
C
D