Blueant S1 User manual

S1 User Guide
© 2009 BlueAnt Wireless

2
Contents
Introduction .................................................................................................................. 4
Getting Started: Pairing The S1 ................................................................................... 6
Installing the S1 in your Car ........................................................................................ 8
Using the S1 ............................................................................................................... 10
Answering Calls .................................................................................................. 10
Making Calls ........................................................................................................ 10
Streaming Music ................................................................................................. 11
Switching the S1 On and Off ............................................................................... 12
Pairing ......................................................................................................................... 13
Charging the S1 .......................................................................................................... 14
Charging the S1 with the AC Adapter ................................................................ 14
Transferring Audio Between the S1 and your Phone ................................................ 15
Automatic Reconnection ............................................................................................ 16
Using More Than One Phone At The Same Time (Multipoint) ................................... 17
Multiple Calls ............................................................................................................. 19
Troubleshooting .......................................................................................................... 20
Resetting the S1 .................................................................................................. 20
To Reset the S1............................................................................................ 20
My Phone Does Not Automatically Reconnect to the S1 .................................... 20
Configuring Your Phone To Automatically Reconnect to the S1.................. 21
S1 Reference .............................................................................................................. 22
Understanding the Light Flashes ....................................................................... 22
Button Functions ................................................................................................. 22
Safety and General Information ................................................................................. 25
European Union Directives Conformance Statement ........................................ 25
FCC Notice To Users .......................................................................................... 25
Industry Canada Notice to Users ....................................................................... 27
Caring for the Environment by Recycling ........................................................... 27

3
Choking Hazard ................................................................................................... 27
Protect Your Ears ................................................................................................ 28
Care and Handling .............................................................................................. 28
Approved Accessories ......................................................................................... 29
Electromagnetic Interference ............................................................................. 29
Safety, Warning and Information Symbols ......................................................... 30
Smart Practices While Driving ........................................................................... 30
BlueAnt Limited Global Warranty ....................................................................... 31

4
Introduction
The BlueAnt S1 Bluetooth ® car kit offers a safe and legal alternative to talking on your phone while
driving.
Welcome to the S1 user manual. If you are looking for help with your BlueAnt S1, then you've come to
the right place. This manual explains everything you need to know about your S1, and more.
Getting to know your BlueAnt Device
Your BlueAnt device came with a "Quick Start Guide", and you should read this first. It tells you
everything you need to get started, and is the best place to start learning about your BlueAnt device.
The online user guide contains all the information from the Quick Start Guide plus much more,
including tips and tricks to help you get the most out of your BlueAnt device, details of how to access
the advanced features and functions of your device, and troubleshooting information with advice on
solving common problems you might encounter.
Using this Manual
To make it as easy as possible to use, this user manual is available as both a set of web pages and a
PDF.
Both versions contain exactly the same information. The web pages are ideal if you want to read about
your BlueAnt device on your computer screen or using a mobile device with internet access. If you
prefer to save a copy of the user manual to read offline or to print out, then you can download the PDF
version.

5
Please consider the environment before printing the user manual.

6
Getting Started: Pairing The S1
To get started, you need to pair the S1 with your phone.
Pairing creates a stored link between the phone and the car kit. Once you have paired your phone with
the S1 they will reconnect to each other in future without you having to repeat the pairing process.
1. Make sure the S1 is turned off.
You can tell if the S1 is on or off by looking at the Bluetooth Light on the front. If the light is on or
flashing, then the S1 is on: turn it off by holding down (the Multi-Function button) for
about 5 seconds. The S1 will beep and the light will turn red and then go out.
2. With the S1 off, hold down (the Multi-Function button) for about 5 seconds, until the
Bluetooth light starts flashing red and blue. This indicates that the S1 is in pairing mode.
3. Go to the Bluetooth menu on your phone, and turn Bluetooth on.
If you don't know how to do this, refer to the section on pairing or Bluetooth in your phone's
manual, or check with your phone manufacturer for more information on how to enable
Bluetooth on your mobile phone.
4. Use your phone's Bluetooth menu to search for Bluetooth devices.
This may take a few minutes, depending on your phone model.
5. When your phone finishes searching, it will display a list of devices it has found. Select the
BlueAnt S1 from the list.
6. If your phone prompts you for a password or security code, enter "0000".

7
7. Some phones will now connect to the BlueAnt S1 automatically. If your phone prompts you to
confirm whether you want to connect to the S1, accept the connection request.
If your phone does not connect to the S1, then use your phone's Bluetooth menu to initiate a
connection to the S1. If you don't know how to do this, refer to the section on pairing in your
phone's manual.
You are now ready to start using the S1.
On some phones you may need to change an additional security setting to allow the
phone and car kit to reconnect to each other automatically every time they come back
into range.
If your phone keeps prompting you to accept the connection from the S1 every time
you bring it back into range with the S1, then this applies to you. See "My Phone Does
Not Automatically Reconnect to the S1" (page 20) for more details on how to
change this setting on your phone.

8
Installing the S1 in your Car
The S1 is designed to attach to your car's sun visor. Use the supplied plastic clip to attach the S1 to
the visor.
1. Attach the clip to the slots on the back of the S1 and slide it so that it locks in place.
Do not force on the S1's buttons when you attach the clip.
2. You can attach the clip 2 different ways, depending on how you want to position the S1 on your
car's sun visor.
The closed side of the clip should be aligned with the top or bottom of the BlueAnt S1.
3. Slide the clip and the BlueAnt S1 onto your car's sun visor.
Make sure the microphone is directed towards you.

9
Do not leave the BlueAnt S1 in direct sunlight or in any area where the temperature
may exceed 60°C (140°F), such as inside a closed car on a hot day.

10
Using the S1
Answering Calls
If you've activated the S1's voice answer feature, then you can accept incoming calls with your voice:
just say "ACCEPT CALL", "ANSWER", "ACCEPT", or "OK".
You can also use the S1 buttons to answer or reject the call:
•Click to accept the call.
•Click to reject the call.
If you want to end the call, just click or use your phone's end call button.
Activating the Voice Answer Feature
You can only turn the voice answer feature on or off when the S1 is in "Standby" mode (the S1 is
turned on but there is no active call or music streaming).
• To turn the voice answer feature on, hold "Vol +" for 5 seconds (until the S1 beeps).
• To turn the voice answer feature off, hold "Vol -" for 5 seconds (until the S1 beeps).
You can tell whether or not the voice answer feature is activated by listening to the sound the S1
makes when the phone rings: the S1 plays an additional set of beeps at the end of each ring when the
voice answer feature is activated.
Getting The Best Results Out Of The Voice Answer Feature
For the best results:
• Say the command slowly and clearly.
• Emphasize each syllable of the voice command.
• Say the command within three seconds of hearing the special ring tone.
• Speak louder than any background noise.

11
Making Calls
To make a call, do any of the following:
• Dial a number on your phone: the audio will automatically transfer to the S1.
•To redial the last number you called, hold for about 3 seconds (this function is only
available if your phone supports the handsfree Bluetooth profile).
•If your phone supports voice dialing, then you can use it to make calls. Hold for
about 1 second to activate your phone's voice dialing feature. You may need to record voice tags
on your phone to use this feature: see your phone's manual for more details.
If you want to end the call, just click or use your phone's end call button.
On some phone models, the audio may remain on the phone when you initiate a call.
In this case, hold for about 1 second to transfer the audio to the BlueAnt
S1.
Streaming Music
If your phone supports the Bluetooth A2DP profile, you can play music from it through the S1 speaker.
To play music, make sure that your phone is paired and connected, then simply go to your phone's
music player and press play.

12
•Once the music is playing you can double click to pause and play the music.
• The music will pause automatically if you receive a call on the phone.
• You can use the volume buttons on the S1 to adjust the volume. Depending on your phone model,
you may also be able to adjust the volume using the volume buttons on your phone.
If the music does not play automatically through the S1, you may need to change a
setting on your phone to configure it to play the music through Bluetooth. If this is the
case on your phone, you need to change your phone's "play via" or "listen via" setting
to configure it to use Bluetooth to play the audio.
If you receive a call while you are listening to music through the S1, the music will pause until you
reject or end the call. On some phones you will need to restart the music manually.
Switching the S1 On and Off
You can tell if the S1 is on or off by looking at the Bluetooth Light on the front. If the light is on or
flashing, then the S1 is on.
•To switch the S1 on, hold for 1 second (until the Bluetooth Light flashes blue).
•To switch the S1 off, hold for 5 seconds (until the Bluetooth Light turns red).
The S1 plays a beep when it switches on and off.

13
Pairing
You only need to pair your phone with the S1 once. Once you have paired your phone with the S1 they
will reconnect to each other in future without you having to repeat the pairing process. If you need to
pair an additional phone, simply:
1. Turn the S1 off by holding down (the Multi-Function button) for about 5 seconds. The
S1 will beep and the light will turn red and then go out.
2. Put the S1 back into pairing mode by holding down (the Multi-Function button) for
about 5 seconds, until the Bluetooth light starts flashing red and blue.
3. Follow the instructions in "Getting Started: Pairing The S1" (page 6) to pair the S1 with your
phone.
The S1 can store pairing information for up to 8 Bluetooth devices. If you pair a ninth device, it will
replace the stored pairing information for the phone that has not connected to the S1 for the longest
time.
You can connect the S1 to two phones at the same time. For more information, see "Using More Than
One Phone At The Same Time (Multipoint)" (page 17).

14
Charging the S1
Your S1 has been given an initial charge to get going, but in future you will need to charge it for up to 3
hours.
Use the supplied AC adapter to charge the S1 whenever the battery is low.
You will be able to tell that the battery is low because the Bluetooth Light turns steady red.
If the battery level drops to very low, then the S1 will play a low battery sound and automatically
switch itself off.
Charging the S1 with the AC Adapter
1. Attach the supplied charger to an external power source.
During charging, the Bluetooth Light on the middle of the S1 will turn orange.
2. Charge the S1 until the Bluetooth Light turns solid green.

15
Transferring Audio Between the S1 and
your Phone
If your phone supports the handsfree Bluetooth profile, then you can transfer the audio between the
S1 and your phone during a call.
•To transfer audio from the S1 to your phone, hold for about 3 seconds.
•To transfer audio from your phone to the S1, hold for about 1 second.
On some phones you may need to accept a connection prompt displayed on the phone
before you can transfer the audio. If this applies to your phone, you can avoid this
by configuring the phone to treat the BlueAnt S1 as a "trusted connection". See
"My Phone Does Not Automatically Reconnect to the S1" (page 20) for more
information.

16
Automatic Reconnection
The BlueAnt S1 is designed to reconnect to your phone automatically.
If you take your phone out of range of the BlueAnt S1 for more than 20 seconds (without turning the S1
off), and then come back into range the S1 will search for your phone and reconnect automatically.
It can take up to 10 seconds for the S1 to find your phone and reconnect.
The S1 will only automatically reconnect to the last two connected phones. If your
phone is not one of the last two connected phones then you will have to reconnect to
the S1 using your phone's Bluetooth menu.
In addition, the S1 will not reconnect automatically if you manually disconnected your
phone from the S1 using your phone's Bluetooth menu. In this case you will need to
use your phone's Bluetooth menu to reconnect.
By default, some phones (including Blackberry phones) will prompt you to confirm
whether you want to accept the connection from the S1. If your phone keeps
prompting you about the connection to the S1, then you should change the setting on
your phone so that it treats the S1 as a trusted or authorized connection. For more
information, see "My Phone Does Not Automatically Reconnect to the S1" (page
20).

17
Using More Than One Phone At The Same
Time (Multipoint)
The S1 supports multipoint technology. This means that you can use one S1 car kit with two different
mobile phones or Bluetooth devices at the same time: if either phone rings, you can answer it with the
BlueAnt S1.
If I Have Two Phones Connected, Which One Will Be Used?
When you have two phones connected to the S1:
• You can answer calls received on either phone.
•If you initiate a call through the S1 (by using the button to either redial the last call
or use your phone's voice dial feature), then the call will happen on whichever phone is currently
designated the primary phone. As explained below, this is determined by a combination of
connection order and active calls.
Which Phone Is The Primary Phone?
The primary phone is either the phone that connected to the S1 most recently or the phone that had
the last active call:
• When your phones connect to the S1, the one that connects last becomes the primary.
• Every time you have an active call through the S1 (incoming or outgoing), the phone with the call
becomes the primary phone.
• If both phones go out of range and come back into range together then the primary phone will be
whichever one happens to reconnect last out of the two. In this case you will not be able to tell
which phone is the primary until you either initiate a call through the S1 or receive a call on one
of the phones.

18
Setting the Primary Phone
You can force the S1 to change the primary phone by doing any of the following:
• Answer an incoming call. The phone receiving the call will become the primary phone.
• Initiate a call from one of the phone handsets. The phone making the call will become the
primary phone.
•Hold for about 5 seconds. The primary and secondary phones will be swapped.

19
Multiple Calls
The S1 does not allow you to hear a call or music from 2 phones simultaneously. If you receive a call
while you are already on an ongoing call, you will hear a special ringtone.
•Click to end the current call and accept the incoming call.
•Click to reject the incoming call and continue with the current call.
• Or do nothing if you want to ignore the incoming call and continue with the current call.
You cannot use the voice answer feature when you are already on a call. You must use
the S1 buttons to answer or reject the call.

20
Troubleshooting
This section describes some typical problems you may encounter, and explains how to solve them.
General Advice
If you are having problems with your S1, you can reset the S1 and start again: see "Resetting the
S1" (page 20) for more information.
If this does not solve your problem, you should:
• Check that your phone has the latest firmware installed on it, and update your phone if it does
not. You should be able to download new firmware from your phone manufacturer's website.
• Try resetting your phone by switching it off, removing the battery, and then replacing the battery
and switching it back on again.
If you have tried all of these steps, and have still not been able to resolve your problem, then please
call us for help.
Resetting the S1
If you are experiencing problems, you can reset the BlueAnt S1 and start again.
Resetting the S1 will clear all the stored pairing settings and put the device back into
pairing mode.
To Reset the S1
1. Turn the S1 off.
2. Hold down "Vol +" and (the Multi-Function button) together until you hear a loud
siren/distinctive tone.
3. The S1 will turn on. Hold down the "MFB" for about 5 seconds to turn it off again.
The S1 has now been reset: all pairing information has been deleted. When you turn the S1 back on
again it will go straight to pairing mode.