Blueant SuperTooth II User manual

OVERVIEW
The SuperTooth II is equipped with Bluetooth Technology and a Digital Signal
Processor which allow wireless communications on devices such as Mobile phones,
Smartphones and PDA’s.
It is designed to be a totally portable wireless handsfree kit which will enable the user to
communicate freely without holding a phone. The Supertooth II will work with any
Bluetooth cellular phones available provided that they respect the Bluetooth Protocol.
Don't forget: Drive safely and within the law.
Essentially the new laws mean that if you have to use a mobile phone while driving a
vehicle, then you must use some form of handsfree device.
ILLUSTRATION
“On” Position,
the Swivel Arm (1)
is open at 55º.
“Off” Position,
the Swivel Arm (1)
is closed at 0º.
1Swivel Arm 7 Pick-Up/Hang-Up Button
2Reject Button 8 Microphone
3 Headphone Jack 9 Bluetooth Indicator
4 Speaker 10 Charge Indicator
5 Charger Input 11 Volume Control
6 Pick-Up/Hang-Up Indicator
2

CONTENTS
OVERVIEW..................................................................................................... 2
CONTENTS .................................................................................................... 3
GETTING STARTED ..................................................................................... 4
VEHICLE PLACEMENT.............................................................................................4
CHARGING THE SUPERTOOTH II...........................................................................5
TURNING ON/OFF THE SUPERTOOTH II...............................................................5
BLUETOOTH PAIRING PROFILES............................................................... 6
SUPERTOOTH II COMPATIBILITY ............................................................... 7
EXAMPLE PROCEDURE FOR PAIRING TO A MOBILE PHONE ............... 8
HANDSFREE pairing: (Example)...............................................................................9
HEADSET Pairing: (Example)..................................................................................10
MULTI-PAIRING.......................................................................................................11
MAKING/RECEIVING CALLS...................................................................... 12
ANSWERING A CALL..............................................................................................12
MAKING A CALL USING THE SUPERTOOTH II....................................................12
Normal dialing ..........................................................................................................12
Voice dialing.............................................................................................................12
Redialing (Handsfree profile only)............................................................................13
Audio Transfer..........................................................................................................13
Rejecting a call (Handsfree Profile only)..................................................................13
Setting the Volume of the Supertooth II ...................................................................13
Setting the Volume of the Mobile Phone..................................................................13
Phone Profiles (different to Bluetooth Profiles) ........................................................14
Phone Software........................................................................................................14
Resetting Your Phone..............................................................................................14
MANUALS FOR INDIVIDUAL MOBILE PHONES....................................... 15
FREQUENTLY ASKED QUESTIONS (FAQ) ............................................... 68
Contact Us:.................................................................................................. 70
BlueAnt Warranty Process......................................................................... 70
Warranty Terms and Conditions................................................................ 71
Specifications.............................................................................................. 72
3

GETTING STARTED
VEHICLE PLACEMENT
The optimum place to position the Supertooth II in the vehicle is on the sun visor. The
Supertooth II sun visor clip is designed to be reversible to easily transfer the Handsfree
Kit in case you change the position of the sun visor.
Fix the metal clip of SuperTooth II to the sun visor.
Sun Visor Fixing the Clip
Attach the magnetic back of SuperTooth II to the fixed metal clip. The Supertooth
II must be placed wherein its microphone is directed to the mouth of the user.
Sun Visor Up Mic at 55º
The position of the Supertooth II can vary according to the position of the sun
visor. The Swivel Arm can be adjusted to 0º, 55º and 210º orientations.
Sun Visor Down Mic at 210º
4

CHARGING THE SUPERTOOTH II
SuperTooth II can be charged in a car using the SuperTooth II Car Charger or at home
using the Wall charger.
1. Connect the charger’s plug into the
Charger Input of SUPERTOOTH II.
Charge Indicator Status:
•Red = Low battery
•Steady Green = Fully charged
•Alternate Red/Green = indicates charging
2. When fully charged, disconnect the charger.
Bluetooth Indicator Status:
•Blinking Blue = standby (when Swivel Arm is open to 55º to 210º
positions).
TURNING ON/OFF THE SUPERTOOTH II
1. To turn SuperTooth II on, just flip up the Swivel Arm at 55º to 210º positions.
The Bluetooth indicator will glow (blue blink). This indicates that the kit is
ready (standby mode).
Note: Before using this car kit, the user must pair the SuperTooth II with
his phone (refer to PROCEDURE OF PAIRING TO THE MOBILE PHONE).
2. To turn SuperTooth II off, just flip down the Swivel Arm to 0º position. The
Bluetooth Indicator will become red then will turn off after a second.
ADDITIONAL ACCESSORIES go to www.blueant.com.au
1. Extra SunVisor clips
2. Wall Charger
3. Car Charger
4. Earpiece Headset
5

BLUETOOTH PAIRING PROFILES
IMPORTANT NOTICE!!!
You must establish the correct Bluetooth Pairing
Mode for your mobile phone before connecting. If
your handset is not listed on the next page, look in
your phones manual to find the right Bluetooth
Profile to use.
Alternatively, call the Blueant Customer Support
Team or visit www.blueant.com.au for more
information.
Note: Most newly released phones use the Bluetooth Handsfree Profile.
Does your phone use
HEADSET or HANDSFREE
Bluetooth Profile?
6

SUPERTOOTH II COMPATIBILITY
Required Profile
Phone models
Headset Hands free
BlackBerry 7100v / 7100g / 7290 / 7250 
I-Mate PDA2K / PDA2K EV-DO / SP3 / SP3i 
I-Mate Jam / Pocket Pc / Smartphone 2 / 
HP IPAQ 6315 / 6365 / 6385 
MOTOROLA A1000 / E1000 / A925 / A835 / E398 /
MPX220 / MPX / V3 / V80 / V600 / V620 / V525 / V535 
Nokia 810 / 3230 / 3650 / 3660 / 6230 / 6255 / 6260 / 6260
/ 6310 / 6310i / 6600 / 6630 / 6650 / 6670 / 6820 / 7280 /
7600 / 7610 / 8910 / 8910i / 9300 / 9500 / N'GAGE 
Nokia AD-5B Wireless Bluetooth Adapter 3100 / 3120 /
3200 / 3220 / 5100 / 5140 / 6100 / 6170 / 6220 / 6610 /
6610i, 6800 / 7200 / 7250 / 7250i / 7260 / 7270 
O2 XDA 11s / Xphone 2 
O2 XDA Mini / XDA 11 / Xphone 
PalmOne Treo 650 
Panasonic X70 / X700 / P342i 
Sagem MY X8 
Samsung SGH D500 
Sharp GX 15 / GX 25 / GX 30 / GX32 
Siemens S55 / SX1 / S65 / SK65 
Sony Ericsson K700i / S700i / T610 / T628 / T630 / Z600 /
Z1010 
Sony Ericsson P800 / P900 / P910i / T39m / T68 
Sony Ericsson T68i (Version R6 and below) 
Sony Ericsson T68i (Version R7) 
SPV C500 
Qtek 2020 
7

EXAMPLE PROCEDURE FOR
PAIRING TO A MOBILE PHONE
•Pairing to your phone is not possible while charging the Supertooth.
•First, refer to the Compatibility Table above for suggested pairing
modes to determine what pairing mode is best for your phone.
•Pairing will create a link or connection between the two Bluetooth devices,
SuperTooth II and your phone.
•This kit supports either Handsfree or Headset pairing.
•The Handsfree and Headset pairing procedures are different.
•When you are certain of what pairing mode to use, proceed with the
instructions on the following pages.
Please also see the index for each
individual phone on page 16.
8

HANDSFREE pairing: (Example)
1. Bring the mobile phone to about 20cm from SuperTooth II.
2. The Supertooth II is initially off. Turn it on by
flipping up the Swivel Arm to the 55º
position. The Bluetooth Indicator will glow
(blue blink).
3. Simultaneously press the Reject Button and
the Pick-Up/Hang-Up Button for about 10
seconds. A distinctive tone will be heard and
the Bluetooth Indicator LED will change from
blinking blue to alternate blinking red and
blue. SuperTooth II is now in Handsfree
Pairing Mode.
4. While the kit is in pairing mode, access the Bluetooth menu of your phone.
(Kindly refer to your phone’s manual.) Turn on its Bluetooth function then
execute a Bluetooth search so that it will be able to search and find your
Supertooth II. When the phone displays the list of the Bluetooth devices it has
found, select the name of this kit (Supertooth II).
5. When the phone asks for a passcode, enter “0000”.
6. Pairing is successful if the alternating red/blue lights of Bluetooth Indicator
will stop and then change to plain blinking blue. Normally, the phone would
also show briefly on its display if it’s already paired and connected to
SuperTooth II or if pairing has failed.
Note: If pairing has failed, repeat the procedure. If pairing has succeeded,
then your SuperTooth II kit is now ready to use. You can now make or
answer a call using your kit instead of your phone.
9

HEADSET Pairing: (Example)
1. Bring the mobile phone to about 20cm from the Supertooth II.
2. SuperTooth II is initially off. Turn it on by flipping up
the Swivel Arm to 55º position. The Bluetooth
Indicator will glow (blue blink).
3. Simultaneously press the Reject Button and Pick-
Up/Hang-Up Button for about 10seconds. A
distinctive tone will be heard and The Bluetooth
indicator LED will change from blinking blue to
alternate blinking red and blue.
4. Press the Pick-Up/Hang-Up Button again. Press
shortly (release immediately). Bluetooth indicator
blinking will be faster. The Supertooth II is now in
Headset Pairing Mode.
5. While the kit is in pairing mode, access the Bluetooth menu of your phone.
(Kindly refer to your phone’s manual.) Turn on its Bluetooth function then
execute a Bluetooth search so that it will be able to search and find your
Supertooth II. When the phone displays the list of the Bluetooth devices it
found, select the name of this kit (Supertooth II).
6. When the phone asks for a passcode, enter “0000”.
7. Pairing is successful if the alternating red/blue lights of Bluetooth Indicator
will stop and then change to plain blinking blue. Normally, the phone would
also show briefly on its display if it’s already paired and connected to
SuperTooth II or if pairing with it failed.
10