blueclean Speedy Wash User manual

2
Instruction Manual
Model Speedy Wash
www.arblueclean.com
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
WARNING: To reduce the risk of injury, the user must read and understand the instructions
before using this product.
Customer Help Line
1-866-235-5112
SpeedyWash-92141-AR

2
Package content:
1. Power washer unit
2. Handle attachment
3. Top cord holder
4. Manual
5. Nozzle cleaning wire - taped to
the manual for safe keeping
6. 3 in 1 spray nozzle
7. Lance
8. High pressure hose
9. Fixed brush
10. Spray gun (D shows trigger lock
button)
11. Garden hose adapter (blue/
black)
12. Quick connect adapter (clear)
13. Fixed brush handle adapter
14. Detergent suction tube
15. Screws (four)
Quick Start Guide
9
1
3
5
4
7
8
11
2
6
10
13
14
D
15
12
On
O
Switch ON Switch OFF
1. Screw handle onto washer.
Required Tool
2. Screw cord holder onto washer. 3. Connect high pressure
hose to back of washer.
4. Attach high pressure hose
to washer.
5. Switching washer in the ON (|) and OFF (O) positions. Always make
certain washer is OFF when changing attachments and not in use.

3
Trigger Lock Trigger Unlock
Garden
Hose
Adapter
Pump
Hose
QC-Clear
Adapter
QC - Clear
Adapter
Garden Hose
Adapter (GHA) (GHA)
6. Press front button to lock the spray gun and press the
back button to unlock it. Always make sure trigger is in the
lock position when not in use.
7. Connect lances to spray gun, insert lance into
spray gun, push together and at the same time twist
clockwise to lock in place.
Removing push together and twist counterclockwise
then pull apart.
Press nozzle into lance and turn clockwise it will lock
with a “click”.
8. Turn nozzle head to change
the spray pattern.
9. Attach the xed brush adapter to the brush handle. Connect brush the
same as the lance.
10. Clear QC adapter attaches
to power washer, GHA attaches
to garden hose.
11. Attach GHA to the end of
the garden hose.
12. Plug machine into a
grounded outlet, push reset
button.
13. Connect clear quick connect adapter to washer.
Connect GHA to garden hose. Connect GHA to Clear
adapter by pushing together.
14. Point spray gun in a safe direction and
squeeze the trigger on the spray gun until there
is a steady stream.

4
15. Select detergent setting on nozzle. Fill detergent into the
detergent bottle, insert the detergent suction tube in to the
bottle.
16. Select turbo setting for hard,
uneven services like concrete and
patio blocks.
17. Select fan spray for cleaning
windows, patio furniture, etc.
19. Using the fan spray keep spray about 5 ‘ from the surface and at a 45° angle.
It is best to test small area to prevent causing damage.
18. Select detergent setting to use
the detergent to help clean hard
to clean surfaces and additional
chemical is needed to break up the
dirt.

5
Attach
Spray
Gun
20. Remove nozzle and clean out tip by using a unbent
paper clip or the nozzle cleaner that came with the
washer. This helps to prevent particles from blocking and
damaging the nozzle.
21. Clean the clear plastic quick connect adapter
screen. Using a pen or pencil insert at tip to push out
the screen lter. Rinse out thoroughly and replace.
22. Place accessories into compartments for
easy storage.
23. Attach spray gun to the quick connect tting on
the top cord holder on the back of the washer.
WARNING: To reduce the risk of injury, the user must read and understand the instructions
before using this product.
Customer Help Line
1-866-235-5112