BlueSky Designs Mount'n Mover User manual

Move it easily and
independently!
Download our catalog at:
mountnmover.com/catalog
no tools required
The Mount’n Mover
wheelchair mounting system
July 2022

BlueSky Designs, Inc.
2637 27
th
Ave South Suite 209 Minneapolis, MN 55406 e: [e-mail]
p: 612.724.7002 toll-free US: 888.724.7002 www.mountnmover.com
f: 612.724.7004 toll-free fax US: 888.311.4435 www.blueskydesigns.us
Welcome to the Mount'n Mover community!
BlueSky Designs is proud to bring you its unique mounting solution. Our Mount is manufactured in the US
by the same team that designed it with the input of therapists, people with disabilities and their
families.
Mount'n Mover's ergonomic controls make adjustments easy. With its simple setup and memory lock
positions; your Mount'n Mover will consistently lock in, move, and return to, any position that works for
you. Its features include:
Solid, secure mounting
One-handed operation
Low effort, easy access levers to unlock and reposition
Quick and easy tilt adjustment, without tools
Customizable lock positions—24 possibilities per joint
Quick device change out
Take a minute to review the materials and parts included with your Mount'n Mover. We've included a
manual to show how to operate and set up the Mount'n Mover. For up-to-date specific attachment
instructions, check out our website: www.mountnmover.com. We have an array of informational videos,
step-by-step instructions and diagrams on the Support section of our site.
Our friendly staff is available for tech support and questions by email ([e-mail]), phone
612-724-7002 or 1-888-724-7002 (US toll-free) and Skype (mountnmover).
Once you've installed the Mount'n Mover, please take time to connect with our community of users on
our Facebook site. Our enthusiastic users can also offer helpful hints and suggestions.
Available since 2008, the Mount’n Mover began as a custom design for a teenager who needed to
communicate and use her computer at the same time. This practical request produced a rudimentary
movable mount which—coupled with Dianne’s years of custom rehab engineering experience—became
the precursor to the Mount’n Mover product which launched 10 years later.
Our goal is to provide a flexible and customizable solution to make it easier for you to do what you want
to do. If you think there’s something we could do to make it even better, let us know!
Thank you for choosing the Mount’n Mover,
The BlueSky Team
WELCOME TO THE MOUNT’N MOVER COMMUNITY!
HELPFUL TOOLS:
1. THE MOUNT MENTOR EVAL SHEET
2. MOUNT’N MOVER ORDER SHEET
Find both of these tools on our website:
www.mountnmover.com
Follow these steps to fully specify a Mount’n Mover system.
Step 1: Choose a Mount’n Mover Note: Dual, Single Arm and Tilt’n Turner all
come with a Quick Release Plate (QRP)
Single Arm
Mount’n Mover
M2-TQ-H * M1-TQ-H * M0-TQ-H *
Client Name:
Chair Type:
Second Chair:
Device(s) to Attach:
Contact Name:
Email / Phone:
We recommend the High
Resistance Hinge for heavier
devices (5 lbs. [2.3 kg] or
greater).
The High Resistance Hinge deters device angle adjustment when
the tilt lever is unlocked. Both Hand Lhinges can be securely
locked using the tilt lever lock.
Tilt Hinge Resistance:
M2-TQ-L * M1-TQ-L * M0-TQ-L *
(High Resistance Hinge)
(High Resistance Hinge)
(High Resistance Hinge)
(Low Resistance Hinge)
(Low Resistance Hinge)
(Low Resistance Hinge)
Dual Arm
Mount’n Mover
Tilt’n Turner
Choose a
Mount’n Mover
Choose Device
Attachments
and Accessories
Choose
Where to
Mount
Choose a
Post Length
Simple Mount
Large
Simple Mount
Small
Two Lip
Supports
Included
One Lip
Support
Included
TRA-LS-1/2
SM-LG-L *
TRA-LS-1
SM-S-L *
SM-LG-H * SM-S-H *
Post Included.
Choose Post
length below
Post Included.
Choose Post
length below
Set
of six
( 1/2” tall x 2” long )
( 1” tall x 2” long )
Easy Mover with Quick Connect
Receiver (dual and single arm)
SM-QC-L *
SM-QC-H *
EM2-QC-H *
EM2-QC-L *
EM1-QC-H *
EM1-QC-L *
Tilt hinge
high or low
resistance
*
Simple Mount
with Quick Connect
Receiver
Additional
Lip Supports
Single
Dual
Easy Mover with Tilt Plate
EM2-TP-H*
EM2-TP-L*
EM1-TP-H*
EM1-TP-L*
(QRP not included
with Easy Movers)
( non-locking plate )
Easy Mover with Tilt Plate
( locking tilt plate)
Dual
(QRP not included
with Easy Movers)
Single
EM2-LTP-H*
EM2-LTP-L*
EM1-LTP-H*
EM1-LTP-L*
Easy Mover
Tilt’n Turner
EMT-L*
EMT-H*
(QRP not
included)
pg 1 of 6
SIMPLE MOUNTS
EASY MOVERS
*
(Quick Connect Plate
-QCP not included
with Easy Movers)
( non-locking tilt )
Quick Release
Plate
QRP
Not
included with
Easy Movers.
January 2019
Mount n Mover
Order Sheet
by BlueSky Designs
Distributor:
Phone:
Website:
www.mountnmover.com
Phone: [phone] // 888.724.7002
Fax: [phone] // Intl Fax: [phone]
3

4
Table of Contents Download another Instruction booklet:
www.mountnmover.com/products/eval-kits
5. Wheelchair attachment overview
Wheelchair Attachment Plates and Hardware:
9. WC-AAP Angle Adjustment Plate
10. WC-LAE L-Angled Extension Plate
11. WC-AP4 Adapter Plate 4
12. WC-AP2 Adapter Plate 2
13. WC-AP5 Adapter Plate 5
14. WB2 Wheelchair Bracket
15. WC-R1B-Set + WC-R7/8B-Set Round Bridge Clamp 1” and 7/8”
16. WC-TN T-Nut
17. WC-COVED-1” SET 1” Coved Spacers with hardware
18. WC-COLLAR-1” SET 1” Collar Clamps with hardware
Device Plates:
21. Device Plate Graph Not all Device Plates are included in this Eval Kit. Call us!
23. DP-PRC1 Attaches to Accent 1400 with Look Eyegaze Bar
24. Accent 1400 Attachment instructions for 1400 with LOOK Eyegaze bar. (Otherwise use the DP-QCR)
25. DP-Multi1 VESA, Smartbox, Skyle, Lightbox, Control Bionics
26. DP-QCR Attaches to most PRC and Tobii Devices
27,28,29. DP-T5 Attaches to Tobii I-13 and I-16
30. DP-EXT To oset for IR on Tobii I-13 and I-16. Also for use on larger devices to clear the hoop
31,32. DP-UR Universal Rotator (switch from portrait to landscape) or (correct tilt for eyegaze)
33. DP-QCP Connects to DP-QCR and to Rehadapt UDS
Mounts and Accessories:
37. EM1-QC-H Easy Mover Single Arm with high torque hinge
38,39. M2-TQ-H Dual Arm Mount’n Mover
40. P18, P12 Posts (other sizes/custom are available)
41. TC Table Clamp
42. SM-S-H-P18 Simple Mount Small with 18 inch post and a high torque hinge
43. TRA-LS-1/2” and 1” Lip Supports (Set of six 1/2” and 1”)
44. TR-iTab or TR-LG Trays (Eval Kit includes a Laptop Tray and your choice of a Large Tablet Tray or an iTab Tray)
45,46,47,48,49. Link Cube Congurations, Multi Mount Systems, Eval Sheet, Etc
Please take pictures of your
nal set up for ease of ordering!
*

T-Nut
(WC-TN)
Adapter Plate 2
(WC-AP2)
Adapter Plate 4
(WC-AP4)
Bridge Clamps
Wheelchair Attachment Overview All plates are considered ‘multi-use plates’ and can
be congured, combined, and used in a variety of ways.
What you use will
depend on what kind of
chair frame you have.
*
OPTIONAL OFFSET
Wheelchair
Bracket
Anchor to Chair
(WB2)
L-Angle Extension Plate
(WC-LAE)
Adapter Plate 2
(WC-AP2)
Adapter Plate 4
(WC-AP4)
Angle Adjust Plate
(WC-APAP)
(WC-AP)
(WC-AP4)
(WC-AP2)
Span the bridge or collar clamps with a plate
Oset example
*
*• Round tubing
• Slide track
• Hole-spacing
• Tie-Down
{
Plate to span
across the bridge clamps
or collar clamps
Round Clamp
(WC-R1 or R7/8)
Start with a
power or
manual
wheelchair
readed Holes
Adapter Plate 5
(WC-AP5)
Adapter Plate 5
(WC-AP5)
(WC-AP5)
Collar Clamps
Coved
Spacers
(WC-COVED)
OR
5

Wheelchair Attachment
Plates and Hardware
Never attach two plates via
threaded hole to threaded hole!
This damages the threads and
the connection can loosen!
WARNING!
*Plate to Plate Attachment Options
- Non-threaded hole to threaded hole = Good
- Non-threaded hole to non-threaded hole with nut = Good
-Threaded hole to threaded hole = Not good
(will damage threads!)
Hole Pairing Options
- Attaching with two holes = BEST
- Hole and slot (horizontal or vertical) = Good
- Slot and slot (both horizontal) = Ok
- Two vertical slots = NOT GOOD! (could slip or wobble!)
7

Angle Adjustment Plate (WC-AAP)
Product: WC-AAP, Angle Adjustment Plate
Weight: 4.4 oz. (0.12 kg)
Plate to Plate Attachment Options
- Non-threaded hole to threaded hole = Good
- Non-threaded hole to non-threaded hole with nut = Good
- Threaded hole to threaded hole = Not good
(will damage threads!)
(1) Angle Adjustment Plate
(2) ¼-28 x ½” Socket head cap screws
1/4-28 Threaded Holes (Qty = 8)
2.40 inches
( 61mm )
2.0 inches
( 50.8mm )
Scale 1 : 1
Angles available with the Angle Adjust Plate (AAP)
(Tilts to accommodate WB2 at horizontal level)
Non-threaded
holes (Qty = 2)
Set Includes:
WC-AAP
1.250”
9
Never attach two plates via
threaded hole to threaded hole!
This damages the threads and
the connection can loosen!
WARNING!

L-Angled Extension Plate (WC-LAE)
Product: WC-LAE, L-Angled Extension Plate
Weight: 10.0 oz. (0.25 kg)
One L-Angled Extension Plate
Two ¼-28 x ½” Socket head cap screws
WC-LAE PLATE
being used to oset the
solid wheelchair bracket
(WB2) out from chair.
Set Includes:
FACE
FACE
EDGE
EDGE
A
B
C
D
E
Possible
congurations:
Scale 1 : 1
90 degrees
2.625 inches
( 66.7mm )
2.625 inches
( 66.7mm )
1.25in
(38.1mm)
1.25in
(38.1mm)
2.00 inches
( 50.8mm )
Threaded
holes (x4)
( 1/4-28 )
R .250 (x8)
(6.35mm)
Always attach [through hole] to [threaded hole]. Minimum of two bolts to attach plate
Never attach [threaded hole] to [threaded hole]. Can damage threads!
*
*
Through
holes (x4)
through
hole threaded
hole
**
10
Never attach two plates via
threaded hole to threaded hole!
This damages the threads and
the connection can loosen!
WARNING!

Adapter Plate 4 (WC-AP4)
Product: WC-AP4, Adapter Plate 4
Weight: 7.3 oz. (0.21 kg)
1/4-28 threaded Hole (Qty = 5)
2 1/4 inches
(57.2mm)
3 3/4 inches
(95.3mm)
Scale 1 : 1
Multi-Use Plate
Plate to Plate Attachment Options
- Non-threaded hole to threaded hole = Good
- Non-threaded hole to non-threaded hole with nut = Good
- Threaded hole to threaded hole = Not good
(will damage threads!)
Hole Pairing Options
- Two holes = BEST
- Hole and slot (horizontal or vertical) = Good
- Slot and slot (both horizontal) = Good
- Two vertical slots = NOT GOOD! (could slip!)
Set Includes:
(1) Adapter Plate 4 (WC-AP4)
Hardware - Plate to Plate Attachment
(2) 1/4-28 x 1/2” Socket head cap screws
Hardware - Unitrack:
(4) M6-1 x 14 Socket head cap screws
(4) M6-1 x 10 Square nut
5/16
5/16 5/16
Hardware - Through Holes in Frame:
(2) 1/4-28 x 1 5/8” Socket head cap screws
(2) 1/4-28 Lock nut
11
Permobil attachment

Product: WC-AP2, Adapter Plate 2
Weight: 10.0 oz. (0.28 kg)
Material:
0.250” (6.35 mm) laser cut steel
Coating:
Electroless nickel
Set Includes:
(1) Adapter Plate 2 (WC-AP2)
Plate to Plate Attachment Options
- Non-threaded hole to threaded hole = Good
- Non-threaded hole to non-threaded hole with nut = Good
-Threaded hole to threaded hole = Not good
(will damage threads!)
Hole Pairing Options
- Two holes = BEST
- Hole and slot (horizontal or vertical) = Good
- Slot and slot (both horizontal) = Good
- Two vertical slots = NOT GOOD! (could slip!)
Permobil
Unitrack
ONLY!
Adapter Plate 2 (WC-AP2)
1/4-28 Tapped hole
(Qty = 4)
Multi-Use Plate
Never attach two plates via
threaded hole to threaded hole!
This damages the threads and
the connection can loosen!
WARNING!
Hardware - Plate to Plate Attachment
(2) 1/4-28 x 1/2” Socket head cap screws
Hardware - Unitrack:
(4) M6-1 x 14 Socket head cap screws
(4) M6-1 x 10 Square nut
Hardware - Through Holes in Frame:
(2) 1/4-28 x 1 5/8” Socket head cap screws
(2) 1/4-28 lock nut
Through
holes
in frame
Plate to plate
attachment
12

Adapter Plate 5 (WC-AP5)
Product: WC-AP5, Adapter Plate 5
Weight: 10.6 oz. (0.3 kg)
1/4-28 threaded Hole (Qty = 4)
5 inches
(127mm)
Scale 1 : 1
Plate to Plate Attachment Options
- Non-threaded hole to threaded hole = Good
- Non-threaded hole to non-threaded hole with nut = Good
-Threaded hole to threaded hole = Not good
(will damage threads!)
Hole Pairing Options
- Attaching with two holes = BEST
- Hole and slot (horizontal or vertical) = Good
- Slot and slot (both horizontal) = Good
- Two vertical slots = NOT GOOD! (could slip!)
Set Includes:
(1) Adapter Plate 5 (WC-AP5)
Hardware - Plate to Plate Attachment
(2) 1/4-28 x 1/2” Socket head cap screws
Hardware - Unitrack:
(4) M6-1 x 14 Socket head cap screws
(4) M6-1 x 10 Square nut
*See Quick Guide and
website for specics
5/165/16
K
ONLY!
2 inches
(50.8mm)
5/16
Hardware - Through Holes in Frame:
(2) 1/4-28 x 1 5/8” Socket head cap screws
(2) 1/4-28 lock nut
Through
holes
in frame
Never attach two plates via
threaded hole to threaded hole!
This damages the threads and
the connection can loosen!
WARNING!
Multi-Use Plate
13
mountnmover.com
Extend mount further out
with an WC-AP5

Wheelchair Bracket (WB2)
Product: WB2, Wheelchair Bracket
Weight: 11.6 oz. (0.33 kg)
Set Includes:
Scale 1 : 1
(2) 1/4-28 X 0.5” Socket Head Screws
Plate has 4 orientations
WB2 attached to angle
adjustment plate (AAP)
(1) Wheelchair Bracket
2.75 inches
(69.9mm)
2.39 inches
(60.8mm)
2.00 inches
(50.8mm)
Mounting holes
change orientation
Mounting
holes
1.250” 1.250”
Mounting
holes
14

Product: WC-R1”B or WC-R⅞”B, Round Bridge Clamp
Weight: 2.5 oz. (0.07 kg)
Round Bridge Clamp (WC-R1B-set) or (WC-R7/8B-set)
Scale 1 : 1
Set Includes:
close up view
(4) Clamps [1 set -1”] or [1 set-7/8”]
(2) 1/4-28 x 2 1/4” Socket Head Cap Screw
(2) 1/4-28 Lock-nut
0.96 inch
(24.4mm)
1.55 inches
(39.4mm)
.875 inch
(22.2mm)
1” or 7/8”
Plate “Bridges” the Clamps
Fits
1 inch
diameter
tube
Channel is used as a wrench
Fits
7/8 inch
diameter
tube
.885 inch
(22 mm)
15

Product: WC-TN, T-Nut
Weight: 3.0 oz. (0.09 kg)
T-Nut (WC-TN)
Set Includes:
(2) 1/4-28 x 5/8” Socket Head Cap Screw
T-Nut
1.626 inches
(41.30mm)
.625 inch
(15.9mm)
.375 inch
(9.5mm)
(for use with slide track)
Wheelchair Bracket can
attach directly to T-Nut
T-Nut prior to May of 2015 used 1/4-20 screws
*
(1) T-nut
16

COVED SPACERS 1” (7/8” coved spacers available)
USING THE COVED SPACERS TO
ATTACH THE WC ADAPTER PLATE
The size of the coved spacers (1 inch or
7/8 inch) depends on the size of the
tube on the wheelchair.
Included:
• Coved Spacers (1 inch) (x2)
• Nylon Washers (x2)
• Bolts 1/4-28 x 2” (x2)
• Lock Nuts 1/4-28 threads (x2)
WHEELCHAIR TUBEWHEELCHAIR TUBE
COVED SPACERS WITH
BOLTS THROUGH FRAME TUBE
WC-AP2
WC-AAPWB2
17

18
Collar Clamps (Set of two 1” clamps and a set of two
1.125 inch clamps)
Mounting on a curve will usually
require an WC-AAP (angle adjust)
plate to correct the angle to
vertical for the WB2 (wheelchair
bracket). This will allow the
post to be vertical.
WC-AAP
Collar clamps come in many sizes.
If you need a dierent size we
will need to know the
circumference of the tube you
will be attaching to.

Device Plates
NOTE: Not all device plates are included in this Eval Kit.
See next page for “Device Plate Graph” and a list of devices
19