BM PRO JAYCOMMAND User manual

TEAMBMPRO.COM
OWNER’S MANUAL

TEAM
BMPRO
.COM
POWERING YOUR ADVENTURES
With over 50 years’ experience in
power solutions combined with
manufacturing and design facilities in
Melbourne, Australia, BMPRO are the
leading experts in RV power and control
management.
Inspired by the great outdoors, we
have created a range of rugged, smart
and reliable products to power your
adventures.
Our range of battery, power and RV
management control systems gives
you peace of mind when you are on the
road, so that you can relax in even the
most far flung destinations, knowing
you have control over your power
needs.
To learn more about the BMPRO range
of products, please visit our website
teambmpro.com

SAFETY PRECAUTIONS
Please read the Safety Precautions before installing or using the JAYCOMMAND .
Be sure to observe all precautions without fail. Failure to observe these instructions
properly may result in personal damage, or personal injury which depending on the
circumstances may be serious and cause loss of life.
WARNING
Correct installation is the most critical factor in ensuring the safe use of the JAYCOMMAND.
If every consideration of these instructions has been satisfied, the JAYCOMMAND will be
safe to operate.
Do not drop or vigorously shake the product as this may cause damage. Do not shock the
product or its accessories as this may cause the product to fail, catch fire or explode.
Stay away from magnetic equipment. Radiation may erase the information stored on this
product, causing it to become inoperative.
Electricity and water do not mix. Keep this product and your battery dry and do not expose it
to water or water vapor. Do not operate this product or battery near any sort of liquid. Do not
operate this product with wet hands.
Do not use this product in environments that are excessively hot, cold, dusty or humid or
where it will be exposed to magnetic fields or long periods of sunshine. Such exposure may
cause the product or your battery to fail, catch fire or explode.
Clean the housing of this product lightly with a dry or moist cotton cloth. Do not use alcohol,
thinners, benzene or any other chemical cleaner.
The JAYCOMMAND is a high precision electronic product. It contains no user-serviceable
parts inside. Do not try to dismantle, modify or repair it yourself. Disassembly, service or
repair by an unauthorized person will void the warranty.
Before using this product, check that cable connections to the battery are of correct polarity.
To protect against accidental short circuit, ensure that the shrouding supplied with the
batteries are always fitted to the battery terminals.
Do not install this product in the same compartment where flammable materials, such as
petrol is stored.
Product specifications are subject to change and improve without notice.

INFORMATION FOR THE USER
This device complies with Part 15 of the FCC Rules, and Innovation, Science and Economic
Development Canada’s license-exempt RSS(s). Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including what may have cause
undesired operation.
WARNING
Any changes or modification are not approved by BMPRO and will void
compliance of the product and the user’s authority to operate this equipment.
AVERTISSEMENT
Tout changement ou modification non expressément approuvé par BMPRO pourrait
annuler la conformité du produit et le pouvoir de l’utilisateur d’utiliser cet équipement.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency and energy. If not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
Le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes:
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.

Copyright © 2019
MANUAL PART 033554
REV 1.0
Designed by BMPRO, one of Australia’s leading power solution experts, the BMPRO range
of products are proudly Australian made in Melbourne, Victoria and represent a high-quality
product that will provide years of service.
DISCLAIMER: BMPRO accepts no liability for any loss or damage which may occur from
the improper or unsafe use of its products. Warranty is only valid if the unit has not been
modified or misused by the customer.
CONTENTS
SAFETY PRECAUTIONS 4
Information for the User 5
ABOUT THE JAYCOMMAND 8
CONTROLLER 8
NODE 8
SWITCH 8
What’s Included 9
Node 9
Updating the APP on the CONTROLLER 9
Firmware Updates 9
CONTROLLER 10
Monitor 10
Control 10
Description of Parts 11
Control Panel Menu Functions 13
Pairing to the Node 14
Connect to the BMPRO Cloud 17
Cloud Control 18
Winegard 19
THE APP 20
APP Home Screen 20
Water Screen 21
Leveling and Motors Screen 21
Leveling Control 22
Motor Control 23
Climate Screen 24
6

Cool & Cool Auto 24
Fan 25
Heat 25
Lights Screen 26
SmartPressure Tire Monitoring System (Tpms) 27
ENERGY CENTER 28
Battery Monitoring 28
Generator 28
Fuel 29
Fuel Pump Running Indicator 29
GENERAL SETTINGS 29
About JAYCOMMAND 30
Diagnostics 31
SWITCH 32
Checking the Battery in your Switch 32
Replacing the Battery in your Switch 33
How to Install Tire Pressure Sensors 33
How to Check Battery Status 33
Pairing the Tire Pressure Sensor 34
Unpair the Tire Pressure Sensor 34
FAQS AND TROUBLESHOOTING 35
Pairing with the NODE 35
CONTROLLER and APP 35
SWITCH 36
APPENDICES 38
Specifications 38
LIMITED WARRANTY TERMS AND CONDITIONS 39
7

ABOUT THE JAYCOMMAND
The JAYCOMMAND brings smart home technology to your RV, taking control and
management of your RV features to new horizons!
Figure 1: JAYCOMMAND System Diagram
8
SWITCH
CONTROLLER
NODE

To receive notifications about NODE updates and to update the NODE,
make sure that the CONTROLLER is connected to the internet.
WARNING
WHAT’S INCLUDED
Included with this product are:
9NODE
9APP
9CONTROLLER
9SWITCH
9SmartPressure Tire Sensors (Optional)
9Owner’s Manual
NODE
The heart of the JAYCOMMAND system, the NODE, is a RV management
system that powers and monitors your RV features and accessories. The NODE
communicates via Bluetooth Low Energy with the CONTROLLER, SWITCH and
your own smartphone, to receive the commands to control power to all your RV
features and accessories.
UPDATING THE APP ON THE CONTROLLER
To automatically receive the latest updates for the APP, connect your
CONTROLLER to the internet and login to your Google account.
You can also get the latest updates direct from the Google Play Store. Just
search JAYCOMMAND or BMPRO in the Google Play Store and then press
update. For more information, see FAQ and Troubleshooting.
FIRMWARE UPDATES
The NODE can be updated over-the-air, meaning you get the latest feature
updates without the need to bring your RV to your local RV dealer. The APP will
need to be updated regularly to receive the latest firmware.
Notifications to update the NODE firmware may be received after updating
the APP on the CONTROLLER. These updates cannot be postponed. While the
NODE is powered, update the NODE at the prompt to ensure that the NODE is
compatible with the APP.
9

Notifications to update the NODE firmware may be received after updating
the APP on the CONTROLLER. These updates cannot be postponed. While the
NODE is powered, update the NODE at the prompt to ensure that the NODE is
compatible with the APP.
CONTROLLER
The CONTROLLER is a sleek, wall-mounted controller that gives you the
freedom to monitor and control multiple RV functions, all from one convenient
location in your RV.
With a user-friendly, easy to understand App for Android and iOS, the APP brings
information to your fingertips. The APP allows you to monitor and control your
RV from up to 3 personal devices, via Bluetooth and even more devices using
cloud.
The CONTROLLER has WiFi capabilities to connect to the internet and download
the latest app updates.
For more information, see FAQ and Troubleshooting.
MONITOR
Water tanks, Temperature, Tire Pressure Sensor, Battery and Fuel
CONTROL
Lighting, Slide-outs, Awnings, Jacks, Heating and Cooling Systems,
Generators and leveling.
Figure 2: Update firmware message
JAYCOMMAND Firmware Update Available
UPDATE
10

1. CONTROLLER Home Screen Button
2. Connection Bar
When connected to Bluetooth, the icon will appear on screen
When connected to the cloud, the icon will appear on screen.
Both icons will appear when both services are available
3. Settings Icon
Access to the APP General Settings.
This button is only available on the Home Screen
4. Return
Navigate to previous page.
5. Main screen
Navigate to the CONTROLLER’s tablet Android screen.
6. Recent Applications
Display a list of recently used / background applications on the
CONTROLLER.
7. Reset Pin Hole
To reset the CONTROLLER, insert an item (such as a paper clip)
in the reset pin hole.
DESCRIPTION OF PARTS
Figure 3: The CONTROLLER and its parts
11

8. Control Panel
To provide quick access to lights, water pump and
motor operation while the CONTROLLER is in use.
9. Lights
Turn lights and water pumps on/off:
All Interior Lights
All Exterior Lights
All Lights
Water Pump Control
10.Motor Operation
To extend (EXT) and retract (RET) any motors installed in the RV.
Note: These buttons are also used during the pairing process between the NODE
and devices such as the CONTROLLER and smartphone.
11.& 13. Navigation Buttons
Use navigation buttons to scroll through Control Panel menu functions.
For more information on available functions, see Menu Functions.
12.Menu Display
Displays the current menu function.
12

Off
Navigate to OF, then press EXT to turn
power OFF to all appliances.
The OF function will not shutdown
generators connected to the NODE.
Navigate to the OF function, then press EXT
to confirm that power to all accessories
should be turned off.
Note: The CONTROLLER will turn off after
10 seconds. The CONTROLLER can be
turned back on by pressing any of the Light
buttons on the Control Panel.
Pairing
To pair the NODE with the
CONTROLLER, your own smartphone,
or to clear the NODE of any pairings.
For more information, see Pairing to
the NODE and Clearing the NODE.
Awnings
Navigate to desired awning:
A1 (Awning 1)
A2 (Awning 2),
then press EXT or RET to operate.
Jacks
Navigate to desired Jack:
J1 (Landing Jack)
J2 (Front Stabilizing Jack)
J3 (Rear Stabilizing Jack)
then press EXT or RET to operate.
Slide-outs
Navigate to desired slide-out:
S1 (Slide-out 1)
S2 (Slide-out 2)
S3 (Slide-out 3)
S4 (Slide-out 4)
S5 (Slide-out 5)
S6 (Slide-out 6)
then press EXT or RET to operate.
Ramp Door
Navigate to the desired ramp door, then
press EXT or RET to operate.
CONTROL PANEL MENU FUNCTIONS
The menu functions on the Control Panel allow you to operate various motors,
quickly switch off loads and pair or clear the NODE. The following functions
apply depending on what is available in your RV.
13

PAIRING TO THE NODE
Pairing your CONTROLLER, smartphone or tablet to the NODE, is done in three
easy steps and the APP will guide you through the pairing process.
NOTE: The CONTROLLER will have been paired to your NODE at the factory. You
should only need to pair your own device or smartphone to the NODE.
While the NODE can be paired to a total of four devices (including the
CONTROLLER), you can only pair one device at a time to the NODE.
1. Launch the APP on your phone
2. Using the < or > button on the CONTROLLER, navigate to the ‘PA’ menu item
3. When ‘PA’ appears on the display, press the EXT button to start the pairing
process to the NODE, ‘PA’ will blink for a maximum of 30 seconds or until a
device is connected.
Use < or > to navigate to the 'PA' menu item
Figure 4: Press EXT once, to start the pairing process
14

CANNOT PAIR TO THE NODE
When pairing a mobile device to the NODE and "--" appears on screen, it is
mostly likely that four devices are connected to the NODE simultaneously. To
resolve this, either
• Close the app on one of the devices that are connected to the NODE and try
again, OR
• Clear the memory of the NODE of all the previously paired devices.
Figure 5: Failed to connect
WARNING
Clearing the NODE memory will also clear the pairing between the
NODE and CONTROLLER. After clearing, the CONTROLLER will
need to be paired to the NODE again.
CLEARING NODE OF ALL PREVIOUSLY PAIRED DEVICES
1. Go to the APP General Settings and click on Bluetooth Connection
2. Press Unpair RV, to unpair the CONTROLLER from the NODE
Figure 6: Unpairing a mobile device from the NODE
15

5. Pair the CONTROLLER to the NODE again.
Please refer to the Pairing to the NODE.
6. Pair the new device to the NODE, (please refer to the
Pairing to the NODE).
Figure 7: Go to PA, then Press and hold EXT until the number 1 scrolls across the CONTROLLER
3. Navigate to the PA function on the CONTROLLER display
4. Press and hold EXT until the number 1 scrolls across the CONTROLLER
display. The NODE is now clear of all connected devices.
When pairing is successful, you will be taken to the APP Home screen and the
Bluetooth icon will be visible.
Congratulations, you’re connected!
Figure 8: CONTROLLER Home screen after pairing successful
For any additional support please refer to FAQs & Troubleshooting.
16

CONNECT TO THE BMPRO CLOUD
The JAYCOMMAND has cloud control, which allows you to remotely connect,
monitor and control your RV from your smart device. To connect to the BMPRO
Cloud for the first time:
1. Connect your CONTROLLER to the Internet via Wi-Fi
2. Launch the APP, go to General Settings and select Remote Connection
3. Select Create account
4. Enter your Full name, Email address and Password.
Remember to keep your password in a safe place and only share
details with others if you want them to access and control your RV.
5. Select Create account.
6. Now connect your smart device using your BMPRO account details
to get started!.
Figure 10: Enter
your details then
Create account
to activate your
BMPRO account
Figure 9: Create
a BMPRO account
or Log in if you
already have one.
17

CLOUD CONTROL
To control the RV from cloud, launch the a APP on your smart device
1. Select Log in to BMPRO Cloud or in General Settings,
select Remote Connection
2. Enter the same email address and password used on the APP
OR
1.
SUCCESS!
2.
When in cloud control, you can remotely monitor all features as you would when
in Bluetooth control. For safety reasons, the features that CANNOT be controlled
from cloud control are the generator, water, pump and all motor functions
including leveling.
18

WINEGARD
To set up Winegard
1. Download the Winegard App from Google Play Store to your mobile device,
2. On the APP:
• Go to the Settings menu
• Scroll down and select Winegard Settings
• Enter the network name and password from the Winegard Manual
Figure 12: Enter network name and password to access Winegard.
19

THE APP
Download the APP to your smartphone or tablet and enjoy the freedom to
monitor and control the onboard features of your RV remotely.
COMPATIBLE DEVICES
The APP is compatible with Android 4.4 or later and iOS 11 or later. Search for
JAYCOMMAND in the Apple App Store or Google Play.
Figure 13: Compatible with Apple and Google Play
OPERATING THE RV FROM THE APP
WARNING
Available features on the APP may vary according to the
model of your recreational vehicle.
APP HOME SCREEN
The APP home screen provides a general overview of the key features of your
RV. It also provides a quick way to control specific RV lights and the RV's climate
system, direct from the home screen.
Figure 14: The APP Home Screen
20