BMC Trailsync User manual

Trailsync
Dust Wiper Cleaning

Trailsync
Dust Wiper Cleaning
Contents
1. Tools necessary 3
2. General Note 4
3. Step by Step instructions 5
TRAILSYNC – Dust Wiper Cleaning

1. Tools necessary:
Work Stand:
Allen Keys:
Grease:
Clean Rags:
5 Minutes
TRAILSYNC – Dust Wiper Cleaning

2. General Note
We recommend:
•fully cleaning the dust wiper seal at 50 hours intervals
for the best functionality.
•a full seatpost service at every 200 hours of use,
or approx. every 2 years (depending on rider mileage).
The Trailsync seatpost service must be performed by
authorized BMC retailers.
TRAILSYNC – Dust Wiper Cleaning

1
3
2
4
1 Unscrew the M5 screw of the
seatpost head.
2 Remove the seatpost head from
the Trailsync seatpost; it’s not
necessary to remove the saddle.
3. Step by Step instructions
3 Pull the seal head and remove
it from the tube.
4 Thoroughly clean all the parts.
TRAILSYNC – Dust Wiper Cleaning

5 6
7 8
Notice:
A clicking sound can be heard
when the dust wiper is
correctly locked into position.
Notice:
Recommended Torque is 6 Nm.
5 Grease the seal head.
6 Re-assemble the seal head.
7 Reassemble the Saddle head.
8 Align the saddle and tighten
the seatpost head with the
recommended torque.
TRAILSYNC – Dust Wiper Cleaning