BMC TIMEMACHINE 01 Ultegra Di2 User manual

TIMEMACHINE 01
Decal Kit Installation Manual

Cleaning and preparing the frame
Prior to installing the decals, proper cleaning methods will ensure proper
application prolong the life of the decal.
Use a light degreaser to remove any road debris or other contaminants.
Once free of grease, oils and other contaminants, use a dust-free cloth and a
gentle cleaning solution to remove any small dust particles.
Do not touch the frame after cleaning, as oils from the hands will prevent proper
application and adhesion.

Decal set for Timemachine 01 Ultegra Di2
1. Seatstay (x2)
2. Storage box
3. Downtube (x2)
4. V-Cockpit (x2)
5. Headtube 1
2
3
4
5
Flat Cockpit

Decal set for Timemachine 01 Dura Ace Di2 / FRS
1. Headtube
2. Fork (x2)
3. Downtube (x2)
4. Chainstay (x2)
5. Storage box
4
5
3
2
1
30 mm
Align on edge
50 mm

Decal application
Decal remains on the transparent film for applying
1
2
Once decals are all in
place, use a lint-free
cloth to apply
pressure, ensuring all
corners are properly
secured and no air
bubbles remain.
Align the logo on the top line Apply decal from top to
bottom to avoid air bubbles