BMC YH-600A Pro User manual

YH-600A Pro Quick Operation Manual V1.01
1 / 4
YH-600A Pro Quick Operation Manual
1. Button Function
On-Off / OK Button: Turn on/off the device, confirm adjustment.
Shift Button: Switch interfaces and options.
+
If there is no “Exit” on menu page, press and hold these two buttons
together to exit menu page.
2. Setting up the Device
(1) Wear main device on the wrist (preferentially on left wrist) like a watch, and fasten
the wrist belt and move the main device to a comfortable position.
(2) Make the two small open tubes on airflow cannula point towards your nostrils. Fit
the loop around your ears and then back around your neck, without pulling over
your head. Draw the cannula to a comfortable position under your chin, place
adhesive tape as indicated to help secure the cannula.
(3) Fit the airflow cannula to the connection of the airflow kit by turning it clockwise, and
insert the data connector of the airflow kit into the Flow / COM port on the right side
of the device.

YH-600A Pro Quick Operation Manual V1.01
2 / 4
(4) Insert the index finger into the pulse oximeter sensor. The finger must reach the end
of the sensor, but don’t over the end of the sensor. Insert the data connector of the
pulse oximeter sensor into the SpO2port on the top of the main device.
(5) The figure below shows what it looks like when each accessory is fitted.

YH-600A Pro Quick Operation Manual V1.01
3 / 4
3. Recording
(1) Power on device by
pressing and holding
On-Off / OK Button
for approximately
five seconds, enter the
“Record” interface.
(2) If each accessory is connected well, the
“Record” interface can be accessed. The time
notification (0:00:00) in the upper left corner of
the “Record” interface flickers. Press and hold
the On-Off / OK Button for
approximately two seconds to start recording.
Setup
Data Tools
Record
(3) Stop the recording by pressing and holding the On-Off / OK Button and Shift
Button + simultaneously approximately three seconds. Power off
device by pressing and holding On-Off / OK Button for approximately five
seconds.

YH-600A Pro Quick Operation Manual V1.01
4 / 4
4. Data Analysis
From the “Data” interface, users can view each recording data and have a look of SAHS
severity as below:
5. Operation in “Tools” Interface
From the “Tools” interface, data can be transferred via Bluetooth and erased manually. You
can also choose different languages in this inerface.
6. Important Tips
Before using the device, please read the entire user manual and memorize all
information necessary to ensure proper use of the device.
390317