bnz PayClip User manual

BNZ PayClip
Easy steps to get you up and running
Quick start guide

How to charge your PayClip
You’ll need to insert the USB cable into the USB adapter and then
into the wall socket. We recommend that you charge your PayClip
as often you would your phone.
Getting to know your PayClip
• Insert the USB-C end into the USB-C charging port
• Look for this icon to make sure your PayClip is charging
Card swipe
Volume
buttons
Accessibility
mode button
USB-C
charging port
Power /
Sleep button
Contactless card
reading area
Notification
bar
Card insert

Getting started
Turn your terminal on
Press and hold the Power button for a few
seconds until the screen lights up.
1.
Your terminal will power up
Your PayClip will open on the Payment screen.
If you have enabled the SIM on your PayClip,
you’re good to go. You can start processing
transactions. If not, you will need to connect your
terminal to Wi-Fi.
2. 3.
Connect to Wi-Fi
Swipe down from the Notification bar at the top
of the screen and tap and hold the Wi-Fi icon.

5.4.
Find your network
Select your network from the available
networks list*.
*Cellular hotspots will also appear in the list of available
networks to connect to.
To ensure the protection of you and your cardholders, your PayClip will check
that the network has the required security settings before it connects.
Connect to the network
Follow the prompts on screen and tap ‘Connect’.
Press the button at the bottom of the screen to
navigate back to the Payment screen.
Set up your
refund passcode
You will need a passcode to process a
refund and we recommend you do this
as part of your set up, so you’re ready
ahead of time.
To set up your passcode, call us on
0800 729 254 and say “set up”
when prompted.
Note: Only listed account signatories
can set up a passcode.

How to process a transaction
Enter the amount and tap ‘Purchase’.
You can tap on the icon in the top right hand
corner to add a note to the transaction for you
to see in your transaction history.
Your customer then taps, inserts, or swipes
their card or mobile wallet and enters their PIN
if prompted.
The terminal will display ‘Approved’
to confirm the payment has been made.
1. 2. 3.

How to wake and unlock the PayClip
To save power your PayClip goes into sleep mode when you’re not using it.
It will also lock after a period of inactivity.
Select ‘ Email’ to send a receipt or
‘No Thanks’ to complete the transaction.
4.
If you have any questions we’re here to help. Contact us on 0800 729 254 and say
“set up” when prompted. Visit www.bnz.co.nz/payclip for more information.
1. To wake the PayClip
Press power button
2. To unlock the PayClip
Press power button and swipe up on screen
Please hold onto this box so it’s easy to send your PayClip device back to us if you ever need to.
Standard PayClip Terms and Conditions apply. Subject to credit criteria and merchant services terms and conditions.