BOAT OUTFITTERS COOLER SLIDES User manual

1. Flip Cooler
2. Place Slides
3. Adjust Retainer 4. Tighten Retainer Fasteners
Detail A
VIEW19
DETAIL C
A
C
Date:
COOLERSLIDES
Installation Instructions
4/22/2014
Page of
1 2
Flip Your Empty
Cooler Upside Down. Place Slides Upside
Down on Bottom Of
Cooler.
Slide Back Retainer Until
Tight Against Cooler.
Push Slide Track
Back To Access
Back Retainer
Fasteners And
Tighten Accordingly.

5. Spanners 6. Fastening Spanners
Detail B
7. Location 8. Mounting
B
Date:
COOLERSLIDES
Installation Instructions
4/22/2014
Page of
2 2
Choose Among Available Spanners
For Appropriate Size That Allows You
To Fasten Into The Threaded Inserts.
Locate Assembled
Slides And Cooler
in Desired Location
Remove Cooler And
Fasten Slides To Deck
Using Supplied Fasteners.
Tighten Accordingly. Spanner Set Screws
Multiple Spanner
Kits Supplied To
Accomodate
Varying Cooler
Widths.
Note: Only One Pair Of
Spanners Will Be Used.
Others Can Be
Discarded.
Spanner Set Screw
8 pcs. 8-32 x 34"
Deck Fasteners
6 pcs. #10 x 1 14"