BobsCNC KL7 Series User manual
Page 1
K L7 S e r i e s
Version 2.1
Page 2
Safety Informaon………………………………………………………………………………..3
Parts List……………………………………………………………………………………………….4-9
Assembly Instrucons:
Aaching Power Supply to Boom Plate……………………………………………..10-13
Aaching Drivers/UNO Board to Shelf………………………………………………...14-18
Connecng Power Supply Wires….……………………………………………………...19-24
Front Panel Assembly with Emergency, Hold & Resume Switches………..25-26
Aaching Power Switch to Le Side Panel…………………………………………...27
Controller Encloser Assembly……………………………………..……………………...28-30
Connecng Power and Emergency Stop Switches…...………………………....31-33
Installing Shield and Connecng Control Wires………..…………….…………..34-49
Connecng the Home Switches……..………………………...………………………..50-56
Connecng the Servo Motors……………………………………………………………..57-61
Final Controller Assembly…………………………………………………………………...62-63
Aaching the Home Switch Magnets…………………………………………………..64-66
Page 3
’
Hint
Page 4
24” 18”
Page 5
Page 6
Page 7
40
--
4-
Page 8
Page 9
Page 10
Select switch voltage as shown
Page 11
’
Page 12
Page 13
’
Page 14
“1” “4” -
Page 15
Page 16
Page 17
’
-
Page 18
Page 19
Page 20
NOTE: The female connector will be connected in a later step.
Table of contents
Popular Controllers manuals by other brands
Overland Storage
Overland Storage NEO 200S instructions
Danfoss
Danfoss AME 655 installation guide
Sonance
Sonance One Zone Connecting Block CB1 installation instructions
aquanta
aquanta AQ-CA-E100-ESL installation instructions
Capella
Capella AX5000 Series manual
Full Gauge Controls
Full Gauge Controls TC-900R instructions
