Bodyworx J1530CA User manual

Motorized Treadmill
Owner’s Manual
1
Retain this owner’s manual for future reference
Read and follow all instructions in this owner’s manual
Version A
Model No: J1530CA
BODY WORX
BODY WORX

INTRODUCTION
Computer Handle pulse
Hand bar
Safety key
Upright post
Side rail
Rear cover
Motor cover
Bottom frame
Main frame

Congratulations on choosing this treadmill.
You have taken the first step to a healthier and more rewarding lifestyle.
This treadmill is especially designed to give you reliable performance and enjoyable
workout in the comforts of your home. Please find below the features and benefits of this
treadmill.
Incline can meet your different requirement, jogging, running, walking.
Low impact design with cushions, and PU roller so that your joints are protected
against possible injury.
Foldable design for convenient storage.
Mobility wheels for easy moving and relocation.
Hand contact heart-rate system to monitor cardio performance.
Emergency safety key for quick motor shut-off.
TECHNOLOGY DATA
Voltage AC-220V 50Hz
Max weight 115Kg
Folding: 926*756*1500mm
Dimension Unfolding: 1810*756*1290mm
Running belt 1300*420mm
Horsepower 900W
Speed 1.0 16.0Km/h
Incline 0-15%
Remark: Our company retain the priority of revision not to advise in advance.
KEY FEATURES
CAUTION:
Before beginning any exercise program always consult your physician. If you
experience chest pains, nausea, dizziness or shortness of breath, stop exercising
and consult your physician before continuing.

When using an electrical product, basic precautions should always be followed.
Read all instructions before using this treadmill.
GROUNDING INSTRUCTIONS
This product must be grounded! If treadmill should malfunction or breakdown, grounding
provides a path of least resistance for electrical current to reduce the risk of electrical
shock. The product is equipped with a cord having an equipment-grounding conductor and
a grounding plug. This plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with local codes and ordinances.
DANGER! Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the
product- if it will not fit the outlet; have a proper outlet installed by a qualified electrician.
ELECTRICAL SAFETY
To reduce the risk of burns, fire, electrical shock, or injury to persons, take the following
precautions.
When plugged in, do not leave the treadmill unattended at any time. Unplug the
treadmill from the power source when it is not in use.
Do not use the treadmill if the unit is wet or the plug or cable is damaged or the
treadmill is not working properly. Do not use damaged or defective equipment.
Keep the power cable and plug away from heated surfaces.
Never place the power cord under carpeting or place any object on top of the power
cord.
Use only the power cord provided with this treadmill
Please turn the switch to the “off” position before shut down power supply, then remove
the plug from the outlet.
This exercise equipment is designed and built for optimum safety for the home use.
However, certain precautions always apply whenever you operate any exercise
equipment. Be sure to read the entire manual before assembly and operation of this
machine. Also, please note the following safety precautions.
IMPORTANT SAFETY PRECAUTIONS
WARNING!
Connect this unit to a properly grounded outlet only. Please using special circuit
with special power supply, plug with power supply must be connected with earth.

MECHANICAL SAFETY
Before you start to exercise, make sure the unit functions correctly. To maintain the
safety level of the exercise equipment does not use a faulty device.
Replace defective components immediately and/or keep the equipment out of use until
repair.
Inspect the equipment prior to exercising to ensure that all nuts and bolts are fully
tightened before each use.
Do not use attachments not recommended by the manufacturer.
Never drop or insert any object into any opening.
Never activate the speed when someone is standing on the treadmill.
APPROPRIATE ATTIRE
Always wear appropriate clothing. Do not wear clothing that might catch on any part of
this treadmill
Always wear non-slippery shoes while working with the treadmill. Do not wear shoes
with heels or leather soles. Check the soles of your shoes and remove any dirt and
embedded stones.
CHILDREN AND PETS
Most exercise equipment is not recommended for small children. Children should not
use the equipment unless they are under adult supervision. To ensure safety, keep
young children off the treadmill at all times.
Exercise equipment has many moving parts. In the interest of safety, keep others
(especially children and pets) at a safe distance while you exe
CAUTION!
Stop your workout immediately if you feel any plainer abnormal symptoms and
consult your physician. Read this manual before operating this treadmill.

Step 1: Take the machine from the
package, put on the level floor; put the
upright into the bottom frame like picture
Attention: when insert the right upright
post, should connect the signal wires well
between upright post and bottom frame.
Step 2: Use 10pcs screws (right and left
each 5pcs) M8X15 fix the upright post
Attention: fix the front screws well on the
upright, the fix the other side screws.
Step 3: Use 6pcs (our side upright right
and left 3pcs) ST3*10 fix the cover of
upright on the bottom frame.
Step4: Take the computer from package;
connect well the signal wire between
computer and upright
Step5: Insert the back of computer’s U
clamp into the upright post, right and
left each 3pcs M8*15 screws fix the
upright post and computer, like
pictures
Step6: Like the pictures, fix all of the
screws, finish the assembly.
ASSEMBLY INSTRUCTIONS

PLACEMENT IN YOUR HOME
To make exercise a desirable daily activity for you, the treadmill should be placed in a
comfortable and attractive setting. This treadmill is designed to use minimal floor space
and to go nicely in your home.
- Do not place the treadmill outdoors.
- Do not place the treadmill near water or in high moisture content environment.
- Made sure power cord is no tin the path of heavy traffic.
- If your room is carpeted, check the clearance to make sure there is enough space
between the carpet fiber and the treadmill deck. If you are uncertain, it is best to place
mat beneath your treadmill.
- Locate the treadmill at least 4 feet from walls or furniture.
- Allow the safety area of 2m x1m behind the treadmill so that you can easily get on and
off the treadmill without getting trapped during an emergency.
Occasionally after extended use you will find a black dust below your treadmill. This is
normal wear and does not mean there is anything wrong with your treadmill. This dust can
be easily removed with a vacuum cleaner. If you wish to prevent this dust from getting on
your floor or carpet, place a mat beneath your treadmill.
LEVELING THE BASE
It is important that you place the treadmill on a firm level surface.
Check the treadmill to ensure the frame is level once you have moved the treadmill into
the position of your choice.
SETTING UP YOUR TREADMILL
Owner’s M anual 7
CAUTION!
Make sure the running deck is level to the ground. If the deck is positioned on
uneven surface it would cause premature damage to the electronic system.

TURN POWER ON
The On/Off switch for the treadmill is located next to the power supply cord at the back of
the motor cover. Flip this switch to the “ON” position.
SAFETY TETHER KEY AND CLIP
The safety key is designed to cut the main power to the treadmill should your fall.
Therefore, the safety key is designed to bring the treadmill to an immediate stop. At high
speeds, it may be uncomfortable and somewhat dangerous to come to a complete stop
immediately. So, use the safety key as emergency top only. To bring the treadmill to a
complete stop safely and comfortably, use the red stop button.
Your treadmill will not start unless the safety key is properly inserted into the key holder in
the middle of the console. The other end of the safety key should be securely clipped to
your clothing so that in the case that you fall, you will pull the safety key from the console,
which will stop the treadmill immediately to minimize injury. For your safety, never use the
treadmill without securing the safety key clipped to your clothing. Pull on the safety key clip
to make turn it will not come off your clothing.
GETTING ON AND OFF THE TREADMILL
Handle with care when getting on or off the treadmill. Try to use the handlebars while
getting on or off. While you are preparing to use the treadmill, do not stand on the running
belt. Straddle the running belt by placing your feet on both side rails of the treadmill deck.
Place your foot on the belt only after the belt has begun to move at a consistent slow
speed.
During exercise, keep your body and head facing forward at all times. Never attempt to
turn around on the treadmill when the running belt is still moving. When you have finished
exercising, stop the treadmill by pressing the red stop button. Wait until the treadmill
comes to a complete stop before attempting to get off the treadmill.
GETTING STARTED
Owner’s Manual 8
WARNING!
Never use this treadmill without first securing the safety tether clip to our clothing.
CAUTION!
For your safety, step onto the belt when the speed is no more than 3km/h.

FOLDING THE TREADMILL
1. Before folding the body of the treadmill, must cut off the power.
2. Check treadmill’s incline if is the original place
3. Uplift the base deck will parallel to the upright, pedal will pop-up by itself
4. Check the iron sheet before the pedal, if it to the right place(put into the hole),like the
pictures.
UNFOLDING THE TREADMILL
1. Unfolding the treadmill, should choose the place to the power 1m and the place
should smoothness
2. Unfolding the treadmill, first the hands should take hold of the end of the frame, using
foot let the pedal tilt, hands push down the big frame, when the big frame down 1m to the
land, people should leave off the treadmill 1m until it unfold completely.
MOVING THE TREADMILL
This treadmill is easy to move around safety.
To move the treadmill
A Switch off the power
B Unplug the power cord
C Moving the treadmill by using the PU transportation Wheel
Sure the upper point, could use one hand take hold of the end of the big frame, the other
hand take hold of the same sides hand bar, incline 30°~40°,could move the treadmill
slowly.
HANDLING YOUR TREADMILL
Cylinder
pedal

?Windows and button instruction:
1.One big LCD window display the following function:
Distance, time, speed, calories, pulse, circle, body fat date, ring course
2.Fuction button:stop,program,speed+,speed-,incline+,incline-,model,start,speed fast
button 2,4,6,8,10,12KM/H,incline fast button:0,3,6,9,12,15%
A. Program button: under the stop, play the model button could circle choose
program: manual program-P01-P02-P03-P04-P05-P06-P07-P08-P09 –body model:
B. Model button: under the manual, play the model button into time count down
adjust-calories count down adjust-distance count down adjust-usual model-time
count down—
C. Start: under the stop, play it will start the motor.
D. Stop/enter button, when the motor running, play stop, the motor will stop
E. Speed+: under setting, put it will add the setting number, under motor running, play
it will add the speed
F. Speed-:under setting, put it will reduce the setting number, under motor running,
play it will down the speed.
G. Incline+: under motor running, play it will add the incline.
H. Incline-:under motor running, play it will reduce the incline.
I. Speed fast button: 2,4,6,8,10,12KM/H.under motor running, play it will adjust the
speed to the number display.
J. Speed fast button: 0,3,6,9,12,15% under motor running, play it will adjust the
incline to the number display.
?Program/start instruction
1 Program instruction
One manual program, it include: usual model. time count down, calories count
OPERATING THE CONSOLE

A. down, distance count down.
B. Nine setting program: P01,P02,P03,P04,P05,P06,P07,P08,P09
C. One body fat test function:
2 Start instruction:
A. Put the safety key on the right place, all of the LCD line will display 2 seconds, then
into the manual program.
B. Play the start, time window will display: 5 4 3 2 1,and when it countdown with
buzzer,then the motor start.
? Manual model
1: How into the manual program:
A. Open the switch, into the manual program directly.
B. Under the stop, play program could choose into the usual model of the manual
model.
2: The three functions of the manual program: time setting, distance setting, calories
setting.
A. When it into manual program, the time window display time is 0:00 under the
course window display: ‘PRESS PROGRAM OR MODE OR START’
B. Under the manual model, play the model into time count down model, time window
display time just glint, the original time is: 30:00 play speed+/-could set count
down time. time range is 5:00-99:00 under course window display: ‘ADJUST
VALUE TO PRESS START’
C. Under the time count down, play model could into calories count down model, the
fist calories display: 50 therm. play speed+/-could set the range of calores:50-990
therm, under course window display ‘ADJUST VALUE TO PRESS START’
D. Under the calories count down model, play model could into distance count down,
the first distance display is 1.0 km, play speed+/- could set distance ,the range of
distance is 1.0-99.00km,under course window display ‘ADJUST VALUE TO
PRESS START’
3: Manual program instruction
A. Play start button, time count 5seconds,then motor start to run, the first speed is
1.0km/h
B. Play speed+/- could adjust speed
C. Play incline+/- could adjust incline
D. When motor running, play stop, motor stop to run, all of the parameter change to
0,into the usual model of manual program.
E. Play start again, speed add to 1.0km/h slowly.
F. Play speed fast button could set to the display speed.
G. Pull off safety key could stop motor urgently, LCD window display SAFETY KEY.
buzzer sound bi-bi-bi
H. When set time count down to 0.speed down slowly till stop, buzzer sound
15/second,first play model, then start, speed add to 1.0km/h.

A. When set calories reduce to 0,speed down slowly till stop. buzzer sound
15/second,first play model, then start, speed add to 1.0km/h.
B. When set distance reduce to 0,speed down slowly till stop. buzzer sound
15/second,first play model, then start, speed add to 1.0km/h.
C. The parameter not point is progression.
D. Play stop button, motor stop to run.
? Program model
1 Original time setting is 30 minute, just set the time, range of time is 5:00—
99:00.play speed+/- could set adjust the setting. under course of window display
‘ADJUST VALUE TO PRESS START’
2 Play start. motor start to run, speed up to the program model.
3 Play speed+/- could adjust speed.
4 Play incline+/- could adjust incline.
5 Play speed fast button could set the display speed.
6 Play incline fast button could set the display incline
7 Each program divide into 20 sets, the running time is the 1/20 of setting time.
8 It will buzzer three sound when change between each sets
9 When motor running, play stop, motor stop to run, each parameter to 0.into the
usual model of manual model.
10 Play start again, speed add to 1.0km/h slowly,
11 Under program model, setting time reduce to 0.speed down slowly till stop, buzzer
sound 15 times/second, first play model. then start, speed add to the original.
12 Pull off the safety, motor stop running urgently, LCD window display SAFETY KEY,
buzzer sound always bi-bi-bi
?Body fat test
1 When the treadmill stop, play program, choose body fat test program, into body fat
test.
2 Incline window display is the input parameter, speed window display data is setting
.
3 After into the body fat test function, first the incline window display: SEX, means
the input is sex, speed window display 01,means the setting is male, play speed
+/- could choose input :01(male),02(female)
4 Play enter, incline window display; AGE, means into setting age, speed window
display 25 (year), play speed +/- could adjust age,(range of setting is 1-99 year)
5 Play enter,, incline window display HIGH, means into setting body high, speed
window display 170cm, play speed +/- could adjust high(range of setting is 100-
200cm
6 Play enter, incline window display WEIGHT, means into setting weight, speed
window display 70 KG, play speed +/- could adjust weight,(range setting is 20-

1 Play enter, incline window display FAT, means into body test function, speed
window display 00(body fat rate)
2 According to Asian’s standard, body fat 18 is slim, between 18 to 23 is ideal
weight, between 23 to 28 is too weight, 29 is fat
? When pull off the safety, the motor could stop to run urgently, LCD window
display SAFETY KEY, buzzer always sound bi-bi-bi if the motor working, pull off it the
motor stop urgent.
Original Original set Set range Display range
Time(Minute second) 0:00 30:00 5:00-99:00 0:00~99:59
Speed (KM/H) 0.0 N/A N/A 1.0 16.0
Incline sect 00 N/A N/A 00-15
Distance(KM) 0.00 1.00 1.00 99.00 0.0 99.9
Pulse(times/minute) 0.0 50 50 990 0 999
? Program value
P01 P02 P03 P04 P05 P06 P07 P08 P09
No Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline Speed Incline
0 2.0 0 2.0 0 2.0 0 4.0 0 2.0 0 2.0 0 2.0 0 2.0 0 2.0 0
1 4.0 1 6.0 2 6.0 3 8.0 3 6.0 3 6.0 5 4.0 4 4.0 5 6.0 1
2 4.0 2 6.0 2 6.0 3 8.0 3 6.0 3 6.0 5 4.0 4 4.0 5 6.0 2
3 6.0 2 8.0 2 10.0 2 10.0 2 8.0 4 6.0 5 4.0 4 10.0 5 12.0 3
4 8.0 2 10.0 2 10.0 2 12.0 2 10.0 4 8.0 4 6.0 3 12.0 6 12.0 4
5 4.0 3 6.0 3 6.0 3 12.0 3 12.0 5 10.0 4 8.0 3 12.0 6 6.0 5
6 6.0 3 10.0 3 12.0 3 8.0 3 12.0 5 14.0 4 4.0 6 6.0 6 12.0 6
7 8.0 2 10.0 2 12.0 3 12.0 3 8.0 5 14.0 3 6.0 6 10.0 7 14.0 7
8 8.0 2 10.0 2 12.0 2 12.0 2 10.0 4 10.0 3 8.0 6 12.0 8 6.0 8
9 4.0 1 7.0 2 6.0 2 14.0 2 12.0 4 12.0 3 4.0 7 6.0 9 14.0 9
10 6.0 2 8.0 2 12.0 2 14.0 2 14.0 4 14.0 3 6.0 7 10.0 9 15.0 9
11 8.0 2 10.0 2 12.0 2 8.0 2 14.0 4 14.0 4 8.0 8 12.0 9 15.0 9
12 7.0 2 6.0 3 6.0 4 14.0 4 8.0 5 10.0 4 4.0 8 6.0 10 6.0 8
13 6.0 1 6.0 3 6.0 4 8.0 4 6.0 5 6.0 4 4.0 9 6.0 10 6.0 7
14 6.0 1 6.0 3 6.0 4 8.0 4 4.0 3 6.0 3 4.0 9 6.0 10 6.0 6
15 3.0 3 3.0 4 3.0 6 10.0 6 4.0 3 2.0 3 10.0 6 2.0 12 8.0 5
16 4.0 3 3.0 4 6.0 6 10.0 6 10.0 3 8.0 3 10.0 6 4.0 12 10.0 4
17 4.0 2 8.0 3 8.0 3 6.0 3 8.0 2 6.0 4 8.0 5 6.0 8 4.0 3

STRETCH
Stretching prior to exercise will improve flexibility and reduce chances of exercise related
injury. Ease into each of these stretches with a slow gentle motion. Hold for a count of ten.
Do not bounce. Repeat the stretch exercises again after the cool down will help to loosen
and relax your muscles to prevent soreness.
WARM UP
The first five minutes of a work out should be devoted to warming up. This warm up will
limber your muscles and prepare them for more strenuous exercise. Warm up on the
treadmill by walking at slow speeds.
COOL DOWN
Never stop exercising suddenly. A cool down period of about 5 minutes will allow your
heart to readjust to the decreased demand. Use a low speed setting during the cool down
to gradually lower your heart rate.
HOW OFTEN?
It is most often recommended that you exercise at least three to four times a week to
maintain cardiovascular fitness. If you have other goals such as weight or fat loss, you will
achieve your goal faster with more frequent exercise. Whether it is three days or six days,
remember that your ultimate goal should be to make exercise a lifetime habit.
HOW LONG?
For aerobic exercise benefits, it is recommended that you exercise for about thirty minutes
per session. Always start slowly, especially if you have been sedentary during the past
year. In the beginning you may began with as little as five minutes per session. Your body
will need time to adjust to the new activity. As your body adjusts, gradually increase your
workout time per session.
If your goal is weight loss, a longer exercise session at lower intensities has been found to
be most effective. A workout time of 45-50 minutes or more is recommended for best
weight loss results.
HOW HARD?
How hard you work out is determined by your goal. Regardless of your fitness goals,
always begin an exercise program at low intensity. Aerobic exercise does not have to be
painful to be beneficial!
There are two ways to measure your exercise intensity. The first is by evaluating your
perceived exertion level and the second is by monitoring your heart rate.
CAUTION!
Always consult your physician before beginning
any exercise program.

CLEANING
Remove dust on the treadmill with vacuum or slightly damp cloth. Fold up the deck and
clean the floor with vacuum periodically will help to prolong the treadmill product life.
Never use solvents on the deck or running belt. Use of solvents can reduce critical
lubrication of the deck and belt.
RUNNING BELT CENTERING ADJUSTMENT
When you run or walk, you may push off harder with one foot than the other. This will
cause the running belt to run off centered. This treadmill is designed and built to ensure
proper tracking of the belt is always centered on the deck. Occasionally the belt may
need further adjustment to keep it centered. To center the belt, use the enclosed Allen
wrench to adjust the rear roller position.
RUNNING BELT CENTERING PROCEDURE
1. Do not wear loose clothing, neckties, or loose jewelry while making this adjustment.
2. Never turn the bolts more than 1/4 turn at a time.
3. Always tighten one side and loosen the other to prevent over tightening or loosing the
belt.
4. Run the treadmill. Adjust belt while the treadmill is running at 4 Mi/H (6.4 Km/H) with
no person on the belt.
After making the adjustment walk on the belt for five minutes to test. If necessary, repeat
the procedure but never turn the bolts more than 1/4 turn at a time. Over tightening the belt
can significantly shorten the belt life.
IF BELT TOO FAR TO THE LEFT SIDE:
1. Turn the left roller bolt 1/4 turn clockwise (tighten)
2. Turn the right roller bolt 1/4 turn counterclockwise (loosen)
IF BELT TOO FAR TO THE RIGHT SIDE:
1. Turn the right roller bolt 1/4 turn clockwise (tighten)
2. Turn the left roller bolt 1/4 turn counterclockwise (loosen)
MAINTENANCE

RUNNING BELT TENSIONING ADJUSTMENT
If when you plant your foot on the belt, you can feel a slipping sensation then the belt has
stretched and is slipping across the rollers. All belts will stretch over time. This is a normal
and common adjustment on any treadmill. To eliminate this slipping, tension both Allen
bolts on the rear roller 1/4 turn as shown. Try the treadmill again to check for slipping.
Repeat if necessary, but never turn the roller bolts more than 1/4 turn at a time.
DRIVE BELT TENSIONING ADJUSTMENT
If you have tensioned the running belt and are still experiencing a slipping sensation, call
your dealer. Only an authorized dealer should perform tensioning of the drive belt.
LUBRICATING THE DECK
A well-lubricated deck will ensure high performance of your treadmill and reduce the level
of normal war and tear to important components. This treadmill has been pre-lubed at the
factory. However, for optimal performance, the running deck may require periodic
lubrication. With average usage ( 30 minute workout session at 5-6km?h 3 times a week
for two people) lubricate every four to six months. Your may adjust the timing of the
lubrication based on the intensity of the treadmill use level.
To check the lubrication level, simply lift the running belt, and put your hand as far into the
center of the belt as you can reach. If your hand shows signs of silicone, then it does not
need additional lubrication. If the board feels dray and there is very little evidence of
silicone on your hand, then additional lubrication should be added.
TO LUBRICATE THE DECK:
1. Stop running belt so that the seam is located on top and in the center of the deck.
2. Insert nozzle into spray head of lubricant can.
3. Lift running belt.
4. Position nozzle between the belt and the board approximately 200mm (8” ) from the
front of the treadmill.
5. Apply the silicon from the front to the rear of the treadmill on each side of the treadmill.
Try to reach the spray as far into the center of the running deck as possible. The
spray time should be approximately four seconds for each side.
6. Spread the silicon by running the treadmill at 1 Km/H and step gently on the belt from

left to right. Do that for a few minutes and allow the silicon to soak into the belt.
THE ADJUSTMENT OF THE MOTOR BELT
Before all the machine leaving the factory, it’s in the best position, but after a period
running, the belt may become loose.
Adjust the step:
? Use the wrench adjust electrical engineering
stud bolt the agreeable hour hand turns to
move.
? Adjust the scope with take the load and don't
beat slippery for precise.
CAUTION!
Over tightening of the belt will severely shorten the life of the belt and may cause
further damage to other components.
NOTE:
A well lubricated deck will ensure longevity of your treadmill in addition to
providing you with the optimal performance.
DANGER!
To reduce the risk of electrical shock, always unplug the treadmill from the
electrical outlet immediately after use and before cleaning.
µ ç» ú
Ç °¹ öÍ ²
Ƥ´ ø
µ ÷Õ ûÂ ÝË ¿
Belt
Moto
Adjust Screw
Attention:
Please turn off the machine when you adjust the motor
belt
Periodically tidy up the leather belt and leather belt round
grooves to sweep.
Front
roller

Problem Reason may happen Mend methods
a No electrify Put plug into socket
b Not put in the safety key Put in the safety key
c Circuit signal system turnoff Check controller’s port and signal wire
d Power supply not open Put switch on the ‘NO’ place
Treadmill will not start
E Fuse burned Change the fuse
a Lubricate not enough Use the silicon lubricate
Running belt running not
smooth b Running belt too tight Adjust the running belt’s loose and tight
a Running belt too loose Adjust the running belt’s loose and tight
Running belt’s skid
B Drive belt too loose Adjust the running belt’s loose and tight
Er1 Communications not well Signal wire not plug well
Er2 Explode Power pipe explode change
controller
Er3 No sensor signal Sensor wire not plug well, plug it again
Er4 Incline fall System failure Change the
controller
Er5 Filtrate protection Load too heavy Change the
controller
Er6 System body check is
defeated
System failure Change the
controller
SAFETY KEY
PROTECTION
Safety key didn’t put at the
appointed place Put at the appointed place
Er8 EPROM failure 24C02 burn System failure replace the
controller
Er9 Incline VR wire not connect
well Connect again
Computer
display
error
Display not
well
Outside disturb arouse
computer work confusion Put of switch after one minute
electrify again, then it running
TROUBLE SHOOTING

O w n e r’s M a n u a l 2 0
E X P L O D IN G D IA G R A M

PART LIST
ART NAME SPECIFICATION QUANTITY
1 BASE FRAM 1
2 MAIN FRAM 1
3 UPRIGHT 2
4 TUBE OF FIX COMPUTER 1
5 INCLINE FRAM 1
6 CONTROLLER FIXING 1
7 MOTOR FIXING 1
8 OUTSIDE DREWTUBE 1
9 INSIDE DREWTUBE 1
10 PEDAL 1
11 FOOT 4
12 INSIDE HEX NUT M8*40 M8*40 2
13 BASE FRAM FOOT WHEEL ? 62 2
14 FLAT WASHER ? 8*? 16 2
15 HEX NUT M8 2
16 SPRING WASHER M8 2
17 CYLINDER 2
18 FLAT WASHER ? 8*? 16 2
19 HEX NUT M8 2
20 COVER OF BASE FRAM 2
21 SCREW ST3*10L 6
22 INNER HEX SCREW M8*15 16
23 SCREW ST3*25 4
24 HANDLE PULSE 2
25 SQUARE TUBE COVER 2
26 FOAM OF HANDLE BAR 2
27 COMPUTER 1
28 INNER HEX SCREW M8*40 2
29 FLAT WASHER ? 8*? 16 3
30 HEX NUT M8 3
31 SQUARE STUFF 20*20 1
32 PATHWAY CONVER 20*20 1
33 INNER HEX SCREW M8*45 1
34 AQUARE STUFF 25*25 1
35 POWDER METALLURGY CONVER ? 17*? 10*14 2
36 SCREW M5*10L 2
37 TAPER WASHER 2