Bolin Technology D Series User manual

1
D
Flo
D Series
D2-210H and D2-220H
Quick Start Guide
VERSION: D-1
DANTE AV-H™PTZ CAMERA D2-210H &D2-220H
© 2023 Bolin Technology

2
D
Flo
What’s in the Box?
D2-210H & D2-220H PTZ Cameras
Thank you for purchasing your Bolin Dante AV-H™ camera. If you have any
questions regarding the camera, please contact your authorized dealer. Our
website also offers a support page and user stories to inspire you and get the
most out of your Bolin camera.
What’s in the Box?
Dante AV-H Camera X1
IR Remote Control x1
Power Adaptor x1
Power Cord x1
Safety Hook x 1 (Used
to secure the camera to
its mounting solution)

3
Flo
Note: The D2-210H can be powered using the included power supply
adapter, an Ethernet Switch with PoE+ support or PoE+ device.
1
2
3
4
5
6
7
DC12V Power input
LAN/PoE +
Ethernet port
HDMI 1.4 Port
3.5mm audio input
RS232/RS422/4
85 Control port
USB 2.0 Type
C Audio / Video
IP streaming
USB2.0
1
2
3
4
5
6
7
D2-210H Camera Overview

4
Flo
Note: The D2-220H can be powered using the included power supply
adapter, an Ethernet Switch with PoE+ support or PoE+ device.
The D2-220H does not have a 3.5mm audio input connection.
Please use the USB port to 3.5mm audio jack to input audio.
1
2
3
4
5
6
7
DC12V Power input
LAN/PoE +
Ethernet port
HDMI 1.4 Port
3G SDI
RS232/RS422/485
Control port
USB 2.0 Type C
Audio / Video IP
streaming
USB2.0
1
2
3
4
5
6
7
D2-220H Camera Overview

5
Flo
Suggested Accessories
Wall mounting kit
Celling mounting kit
Display Monitor with HDMI
Port or SDI connection if
using the D2-220H camera
Bolin Controller
3G-SDI cable
(For D2-220H)
HDMI 1.4 or 2.0 cable
(For display Monitor)
Cat5e or Cat6 Network
Cable (for Controller)

6
Flo
Required Accessories for Setup
1Gbps | PoE+ Network Switch
HDMI 1.4 or 2.0 cable
(If using display Monitor)
Mac or Windows Computer* with Ethernet connectivity port (1000 Mbps)
to run Dante Controller™
Cat6 Network Cables
*Note: Dante AV-H video can be viewed using Dante Studio™ for
Windows or using a Dante AV-H™ decoder and display monitor

7
D
Flo
❖Required software from Audinate: Download and install Dante Controller
from Audinate’s website on your PC (Mac or Windows)
https://my.audinate.com/support/downloads/dante-controller
Dante Controller software from Audinate allows you to route and configure.
networked audio and video Dante devices, rename devices, change sample
rate, and clock settings, customize the receive latency and more.
❖Suggested additional software available from Audinate: Dante Studio™
to stream PTZ camera and Dante AV content by seamlessly integrating your
PC and applications such as vMix, Zoom, OBS etc.
https://my.audinate.com/forms/dante-studio-trial-survey
Dante Studio is a suite of software tools that brings Dante video directly to your
Windows PC.
Software Installation

8
D
Flo
Power Connection
D2-210H & 220H PTZ Cameras
HDMI Cable
Connection
Camera Power & HDMI Output Setup
1
Video Connection
2
DC 12V
Powe4r
Note: After connecting the DC power, the camera will automatically turn,
tilt, and scan its range.
HDMI 1.4
Display Monitor

9
D
Flo
D2-220H Camera Power & SDI Output Setup
Power Connection
Video Connection
DC 12V
Powe4r
1
2
SDI Connector
3G SDI Cable
Display Monitor
D2- 220H PTZ Camera

10
D
Flo
IR Remote Control
Push the selected # on the camera IR ID section
(up to 3 cameras can be controlled using the IR
remote control based on SW2 Dip Switch setting)
Press the Menu button and use the position
functions of the IR remote to control the camera.
Slow and Fast Zoom - Preset: Make parameter
adjustments, press and hold the Preset button
and select a # (1 through 9) to store the selected
parameters. Reset: Press and hold the Reset
button and press the preset # you wish to cancel
Pan (left and right arrows) and Tilt (up and down
arrows) controls and OSD navigation – Home:
Confirm / Enter selection – Manual Focus: Use
the Far and Near buttons – Auto-Focus
Basic IR Remote Functions
IR ID # and Menu Selection
(OSD)
Slow/Fast Zoom Controls & Preset / Reset Functions
/Resteet(OSD)
Pan / Tilt / Focus controls and Menu (OSD) Navigation
Note: Recommended control distance to be within 10 meters.

11
D
Flo
MODE FULL AUTO
GAIN
SPEED
EXPOSURE IRIS
MODE SHUTTER PRI
MODE IRIS PRI
MODE BRIGHT LEVEL
OFF/ON
LEVEL
AUTO
WB MODE INDOOR
WB MODE OUTDOOR
WB MODE OPW
WB MODE ATW
R GAIN
B GAIN
WB MODE MANUEL 2
SHARPNESS
EFFECT
NOISE REDUCTION
FLIP
MIRROR
DE-FLICKER
GAMMA
WDR
SATURATION
CONTRAST
HUE
MAGENTA GAIN
RED GAIN
YELLOW GAIN
GREEN GAIN
CYAN GAIN
BLUE GAIN
NEXT PAGE
MAGENTA HUE
RED HUE
YELLOW HUE
GREEN HUE
CYAN HUE
PICTURE 2
COLOR MATRIX
MODE MANUAL
EX.COMP
WHITE BALANCE
WB MODE USER
PICTURE 1
OSD Settings Options Overview
Page 1

12
D
Flo
DIGITAL ZOOM
ZOOM RATIO OSD
VIDEO PARAMETERS OSD
ADAPTIVE PT
MF SPEED
P/T SPEED
PRESET SPEED
PAN DIR
TILT DIR
PELCO ID
IR RECEIVE
DISPLAY INFO
AUDIO
PRESET MEMORY
MOTIONLESS PRESET
FACTORY SETTINGS
RELOAD PRESET
VIDEO FMT
SV
PELCO ID
VISCA ID
IR ID
BAUD RATE
COMM TYPE
FORMAT
IP
MAC
SV
NEXT PAGE
EXP MODE
WB MODE
HUE
FLIP
MIRROR
P/T SPEED
PRESET SPEED
STATUS
PAN TILT ZOOM
SYSTEM
PERESET SETTINGS
Page 2

13
D
Flo
1Gbps PoE+ Network Switch
D2-210H or D2-220H PTZ camera
Display Monitor
HDMI cable direct
to display monitor
Network Switch Requirements: Standard non-green 1 Gbps switch with PoE +
Dante AV™ PoE+ Ethernet port
Cat6 Network Cable
Camera Power Using a PoE+ Switch

14
D
Flo
1Gbps PoE+ Network Switch
Click on the “Choose a
Dante Interface” icon”
Open Dante Controller
on your PC
1
Select the network
interface that the Dante
Controller will use to
communicate with other
Dante devices.
Network Cables
Click on the “Refresh” icon. All
Dante AV Transmitters (TX) and
Receivers (RX) devices within the
selected network will be listed.
Camera | Dante Controller Connection
D2-210H or D2-220H PTZ camera
2
3
4

15
D
Flo
Camera to Dante Studio™Connection
Open Dante Studio™
on your PC
Select the network interface use to
communicate with your Bolin camera.
Set the Receiver to H.264/AVC
under Decoder
Make a subscription: TX: Bolin Camera
to RX Dante Studio™
Video Channel Icon
Channel Subscription Icon
Open Dante Video Viewer to view (bundled
with Dante Studio™)
1
2
3
5
4

16
D
Flo
Make sure a subscription has been
made between your Bolin camera
(TX) and Dante Studio™(RX)
Dante Studio™to OBS Studio Setup
Open OBS Studio and click on:
Video Capture > Properties.
Open Broadcast Software
(OBS) is free and open source
for video recording and live
streaming: OBS Software
Download Page
Select Dante Studio under
Device
2
1
3

17
D
Flo
Dante Studio™to Setup
Make sure a subscription has been
made between your Bolin camera
(TX) and Dante Studio™(RX)
Video Communications Inc software is a popular application used
for video conferencing. Open Zoom and under Start/ Stop Video, select
Dante Studio™.
1
2

18
D
Flo
D2-210H / 220H camera bottom view
B
Note: Any DIP Switch changes should be done with the camera turned off.
You can use SW2 B2 though B4 to set the
video format of the camera. The video
format can also be changed using the OSD
menu (last setting will prevail).
Video Format & IR ID Settings
You can select an IR ID # for your Bolin
camera using B7 and B8 DIP Switch. The IR
ID # can also be changed using the OSD
menu (last setting will prevail).
Note: DIP switches are small in size and can be adjusted with a finger or fingernail.
However, if you cannot move a DIP switch on a circuit board, use a small tool, such
as a small screwdriver or paperclip, to gently adjust the switch.

19
D
Flo
Dante AV-H™Streaming Workflow Example
D2-210H or D2-220H PTZ camera
Dante™audio devices
1Gbps PoE++ Network Switch
Display Monitor
Bolin PTZ IP controller
VISCA Over IP
PC running Dante
Controller and Dante
Studio™
4K Display Monitor
Bolin D20S Transceiver
Set to Decoder in this example.
Bolin D412 PTZ camera
HDMI / SDI cable direct
to display monitor
Dante Studio™streaming Dante AV-H™
PTZ camera to PC and PC applications
IR control of D412
PTZ camera via
D20S set to Decoder.
1 Gbps Dante AV™Over IP Network
Note: A 1 Gbps PoE++ network switch is required to power the Bolin D412 PTZ camera in this
example.
Network Cables