BOMBAY Francesca Mermaid User manual

The Francesca Mermaid Table
BO_4091 _ A3_EN_11.01.14
For questions or comments about your product, please contact us at
[email protected] or call our toll free customer service number
1-800-876-7336.
We guarantee that every product we sell will stand up
to the supreme test — our customers’ satisfaction.

WARNING
• This table is intended for decorative use only, maximum capacity 7 lbs. (3.18 kg).
• This table is NOT designed to hold excessive weight or to be used as a
seating surface.
• Improper use may result in damage to the table and/or bodily harm.
A B
Francesca Tray
1 1
C D E
Flat Washer Spring Washer Allen Bolt
111
LARGE PIECES
SMALL PIECES
F
Allen Wrench
1
TOOLS
ASSEMBLY INSTRUCTIONS
1. Place Francesca (A) in a standing position.
2. Position the tray (B) on top of Francesca’s hand so that the peg on the bottom of the tray
ts into the small peg hole, X (see diagram).
3. Use the Allen bolt (E), spring washer (D), at washer (C), and Allen wrench (F) to attach
the tray to Francesca’s hand through the larger hole, Y (see diagram).
A
C
D
E
F
B
X
Y
CARE AND MAINTENANCE
• Do not use harsh chemicals when cleaning the surface of the unit. Doing so will damage
the nish. It is best to wipe clean with a damp cloth.
• If you are located in a freeze/frost climate (32°F and below), store indoors for the
winter months.
ASSEMBLY NOTES
• Please make sure that you have all the parts indicated before you begin assembly.
• Items should be assembled on a soft surface to avoid scratching during assembly.
• This product may need periodic tightening. We recommend tightening every 6 months.
• Caution: Do not overtighten.
ATTENTION
Read all instructions before assembly and use of this product. Failure
to follow these instructions and warnings could result in injury
or damage to the item. Keep these instructions for future reference.