Bonsaii L411-A User manual

Customer Service: [email protected]
1-844-728-6917
Model: L411-A
A4 Thermal Laminator
Instrucon Manual

1
IMPORTANT SAFETY INSTRUCTIONS
The machine is for indoor use only. Plug the machine into an easily accessible
outlet. To avoid electric shocks, the laminator must not be used in humid or wet
condions and water must never be allowed to come into contact with the
machine, the connecon cable or the socket.
● Ensure the machine is on a stable surface.
● Keep the machine away from heat and water sources.
● Turn off the machine aer each use.
● Unplug the machine when not in use for extended periods of me.
● Keep away from pets, while in use.
● The power cord must not come into contact with hot surfaces.
● Don’t leave power cord hanging from cupboards or shelves.
● The device must not be used if the power cord is damaged.
● Don‘t aempt to open or otherwise repair the machine.
● Don’t exceed the machines quoted performance.
● Don’t allow children to use this machine.
● Don’t laminate sharp or metal objects (eg: staples,paper clips).
● The laminator is not intended for commercial or industrial applicaons.
● Aer 2 hours of operaon the appliance must be allowed to cool down
for at least half an hour (Switch off).
● This equipment is not intended for use by children Avoid touching the media
feed opening with the hands, clothing or hair. Unplug this equipment when
not in use for an extended period of me. Hazardous moving part is in this
equipment, keep body parts away from moving parts .
● This equipment is not suitable for use in locaons where childern are likely to
be present.

2
Descripon
Laminang
❶ Power switch (ON/OFF)
❷ Power indicator light
❸ Mode indicator lights
❹ Selector buon
❺ Slot for pouch input (Rear)
❻ Pouch ejector slot (Front)
❼ An-Blocking switch (ABS)
❽ Pouch tray (Foldaway feeding tray)
❾ Pouch posioning aid
1
2
4
3
5
8
7
6
9
Only use special films designed specifically for laminang. Test laminate scrap
sheets and set the machine before final laminang. Remove staples and other
metal arcles prior to laminang.
Heat-sensive documents (eg: ckets, ultrasounds etc) cannot be laminated on
hot sengs. Don’t laminate an empty pouch.

1. Turn the machine on by seng the power switch ❶ to the “I” posion.
The green power indicator light ❷ and the “ 3 mil” indicator light ❸ are
lighng up.
2. If the machine is not in use, set the power switch ❶ to the “0” posion and
the power indicator (green light) ❷ is off.
3. Use the selector buon ❹ to select the desired pouch type.
COLD laminang:
HOT laminang:
Press the selector buon❹ and selector “COLD”❸，and the“COLD” indicator
light❸ starts to flash blue. At this me,the machine enters the warmup cycle.
As soon as the indicator light “COLD” ❸glows permanently the machine is
ready for cold laminang.
Hint: For cold laminang special laminang pouches have to be used, which are
not part of the included starter pack.
3 mil pouches: the green indicator light❸ for “3 mil” starts to flash green as
soon as the power switch is set to the “⼀”posion. At this me,the machine
enters the warmup cycle. As soon as the indicator light “3 mil”❸ glows
permanently the machine is ready and laminang of 3 mil pouches can begin.
5 mil pouches: Press the selector buon ❹ and select “5 mil”, and the “5 mil”
indicator light ❸ starts to flash green. At this me, the machine enters the
warm-up cycle. As soon as the indicator light “5 mil” ❸ glows permanently the
machine is ready and laminang of 5 mil pouches can begin.
Note:
To switch from 5 mil to 3 mil or to COLD laminang press the selector buon
❹ to choose the desired laminang method. The desired mode indicator ❸
will start to flash. It will take several minutes to cool down the device.
Laminang of the desired pouch type may only start if the respecve indicator
light ❸ glows permanently. Otherwise the laminated document could be
damaged which may also lead to damage to the machine itself.
3

4. Lay the document to be laminated into a laminang pouch of the appropriate
size. Make sure that all corners of the document have at least two millimeters
of space from the edge of the laminang pouch.
5. Now lay the laminang pouch, sealed side first on the pouch tray ❽ .
Adapt the pouch posioning aid ❾ to the pouch size used and push the
pouch slowly into the pouch input slot ❺ . Guide the pouch into the laminator
unl it is gripped and pulled in by the rollers.
6. The completed laminated pouch is ejected from the pouch ejector slot ❻ .
Make sure there is enough free space in front of the device to let the pouch
exit without obstrucon. Allow the laminated pouch to cool down for at least
one minute before touching it.
Jammed pouches
Maintenance and cleaning
In case the pouch may be pulled in at an angle or jam itself inside the device
please proceed as follows.
1. Press the an-blocking switch ❼ and the transport of the pouch will be
stopped.
2. The laminate pouch is not pulled in any further.
3. Remove the laminang pouch by hand.
4. Re-start the laminang process.
Unplug the appliance from the wall outlet. Allow the unit to cool down. The
outside of the unit can be cleaned with a damp cloth. Do not use solvents or
flammable materials for cleaning. To clean the internal parts of the unit from
possible contaminaon, a mae cardboard of approx. 250 g/m or a special
blong paper can be used. Run the sheets through the warm machine to
remove any residue from the rollers.
2
4

Delivery:
Technical Data
Laminator
Film
Instrucon manual
Warranty
Noce
The warranty for this appliance is for 12 months from the date of purchase. The
appliance has been manufactured with care and examined before delivery.
Please retain your receipt as proof of purchase. In the case of a warranty claim,
please make contact by telephone with our Customer Service.
The warranty covers only claims for material and manufacturing defects, but not
for transport demage, wearing parts or for damage to fragile components, e.g.
buons or baeries.
This product is for domes c use only and is not intended for commercial use. The
warranty is void in the case of abusive and improper handling, use of force and
internal tampering not carried out by our autorised service branch.
Your statutory rights are not restricted in any way by this warranty. The warranty
period is not extended by repairs made under the warranty. This applies also to
replaced and repaired parts.
120VAC, 60Hz
9.45 inches
13.39 x 4.80 x 3.54 inches
3 minimum, 5 maximum
11.81 inches/min
5

: 5805C Peachtree Corners East
Norcross,GA,30092
: 1-844-728-6917
: customer[email protected]