Bosch Purion 200 User manual

Robert Bosch GmbH
72757 Reutlingen
Germany
www.bosch-ebike.com
0 275 U07 3RP (2023.06) T / 54
en Original operating instructions
fr Notice d'utilisation d'origine
es Instrucciones de servicio originales
Ownerʼs Manual
Purion 200
BRC3800
This manual contains important safety,
performance and service information.
Read and understand it along with the
information provided to you by your
bicycle manufacturer before using the
product, and keep it for reference.
Cette notice contient d'importantes
informationes sur la sécurité, les
performances et l'entretien. Lisez-les et
comprenez-les ainsi que les informations
fournies par le fabricant de votre vélo
avant d'utiliser le produit, et conservez-
les pour référence ultérieure.
Este manual contiene información
importante de seguridad, rendimiento y
mantenimiento. Léalo y asegúrese de
entenderlo junto con la información que
le ha facilitado el fabricante de su
bicicleta antes de usar el producto;
guárdelo a modo de referencia.

0 275 U07 3RP | (29.06.2023) Bosch eBike Systems

English – 1
Table of contents
Introduction ..................................................................................................................................... 2
About Warnings............................................................................................................................ 2
General Warnings ......................................................................................................................... 2
Using your Manual ........................................................................................................................ 3
Operating your Bosch Drive System ..................................................................................................... 4
Safety instructions........................................................................................................................ 4
Product Description and Specifications ........................................................................................... 7
Operation.................................................................................................................................... 9
Establishing a smartphone connection........................................................................................... 13
Troubleshooting ......................................................................................................................... 15
Maintenance and Service ................................................................................................................. 16
Maintenance/cleaning ................................................................................................................. 16
After-sales service and advice on using products............................................................................. 16
Battery Recycling Program........................................................................................................... 16
Bosch eBike Systems 0 275 U07 3RP | (29.06.2023)

English – 2
Introduction
About Warnings
This manual contains many DANGER, WARNING,
and CAUTION indicators concerning the conse-
quences of failure to use, assemble, maintain, store,
inspect and dispose of a Bosch-equipped eBike in a
safe manner.
– The combination of the safety alert symbol and the
word DANGER indicates a hazardous situation
that, if not avoided, will result in death or serious
injury.
– The combination of the safety alert symbol and the
word WARNING indicates a hazardous situation
that, if not avoided, could result in death or serious
injury.
– The combination of the safety alert symbol and the
word CAUTION indicates a hazardous situation
that, if not avoided, could result in minor or moder-
ate injury.
General Warnings
Read all safety warnings and all in-
structions. Failure to follow the warn-
ings and instructions may result in
death or serious injury.
Save all safety warnings and instructions for fu-
ture reference.
The term eBike battery used in these operating in-
structions refers to all original Bosch eBike batteries
from the system generation the smart system.
uRead ALL accompanying manuals before riding
the bike for the first time. Your Bosch Drive Sys-
tem comes with additional manuals and documents
provided by the manufacturer of the bicycle and
other components. Failure to read and understand
safety information can result in death or serious in-
jury.
WARNING
uThis manual contains important safety, perfor-
mance and service information. Read it before
you take the first ride on your new bicycle, and
keep it for reference. The manual can also be found
online at www.bosch-ebike.com.
uThis manual is intended to be read together with
the separate user manual provided with your bi-
cycle. Be sure to read all provided documents in-
cluding labels on the product before your first ride.
uTake responsibility for your own SAFETY. If you
have any questions or do not understand some-
thing, consult with your dealer or the bicycle or
component manufacturer.
uSome eBike accessories may present a choking
hazard to small children. Keep these accessories
away from children.
CAUTION
uThe Bosch Drive System adds weight to your bi-
cycle which you may not be used to lift. Avoid in-
jury, use proper lifting techniques.
0 275 U07 3RP | (29.06.2023) Bosch eBike Systems

English – 3
Using your Manual
In addition to the functions outlined here, changes to
software relating to troubleshooting and functional
modifications may be introduced at any time.
Graphics
The bicycle shown in this manual may differ slightly
from your bicycle, but will be similar enough to help
you understand our instructions.
RIGHT-HAND and LEFT-HAND sides are determined
by facing in the direction the bicycle will travel when
going forward. When you see a broken line (------), the
item referred to is hidden from view.
Bosch eBike Systems 0 275 U07 3RP | (29.06.2023)

English – 4
Operating your Bosch Drive System
Safety instructions
Read all the safety and general instruc-
tions. Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.
Save all safety warnings and instructions for fu-
ture reference.
The term eBike battery used in these operating in-
structions refers to all original Bosch eBike batteries
from the system generation the smart system.
The terms drive and drive unit used in these operat-
ing instructions refer to all original Bosch drive units
from the system generation the smart system.
uRead and observe the safety warnings and in-
structions in all operating instructions of the
eBike system and your eBike.
uDo not attempt to fix display or remote control
while riding!
uDo not allow yourself to be distracted by the
control unit's display. If you do not concentrate
exclusively on the traffic around you, you risk being
involved in an accident. If you want to change set-
tings on your control unit, beyond just changing the
assistance level, stop cycling to do so.
uSet the display brightness such that you can ad-
equately see important information like speed
or warning symbols. An incorrectly set display
brightness can result in dangerous situations.
uDo not use the control unit as a handle. If you lift
up the eBike by the control unit, you may cause ir-
reparable damage to the control unit.
uThe push assistance function must only be used
when pushing the eBike. There is a risk of injury if
the wheels of the eBike are not in contact with the
ground while using the push assistance.
uWhen the push assistance is activated, the ped-
als may turn at the same time. When the push as-
sistance function is activated, make sure that there
is enough space between your legs and the turning
pedals to avoid the risk of injury.
uWhen using the push assistance, ensure that
you can always control the eBike and hold it se-
curely. The push assistance can be suspended un-
der certain conditions (e.g. obstacle on the pedal
or accidentally slipping off the button of the operat-
ing unit). The eBike can suddenly move backwards
towards you or start to tip. This poses a particular
risk for the user if there is an additional load. When
using the push assistance on the eBike, do not
place the eBike in situations in which you cannot
hold the eBike by yourself.
uDo not activate push assistance function while
riding on the bike. Only use push assitance func-
tion when pushing the eBike.
uDo not stand your eBike upside down on its han-
dlebars and saddle if the operating unit or its
holder protrude from the handlebars. This may
irreparably damage the operating unit or the
holder.
uDo not connect a charger to the eBike battery if
the display of the operating unit or the on-board
computer indicates that a critical error has oc-
curred. This may result in damage to your eBike
battery. The eBike battery may catch fire, thereby
resulting in serious burns and other injuries.
uThe control unit features a wireless interface.
Local operating restrictions, e.g. in airplanes or
hospitals, must be adhered to.
uCaution! When using the operating unit with
Bluetooth®, this may cause interference that affects
other devices and systems, airplanes and medical
devices (e.g. pacemakers, hearing aids). Similarly,
the possibility that this may cause damage to hu-
mans and animals in the immediate vicinity cannot
be completely excluded. Do not use the operating
unit with Bluetooth® in the vicinity of medical de-
0 275 U07 3RP | (29.06.2023) Bosch eBike Systems

English – 5
vices, gas stations, chemical plants, areas with a
potentially explosive atmosphere or on blast sites.
Do not use the operating unit with Bluetooth® in air-
planes. Avoid using the device in close proximity to
your body over an extended period of time.
uThe Bluetooth® wordmark and its logos are the reg-
istered trademarks and property of Bluetooth SIG,
Inc. Any use of this wordmark/these logos by
Robert Bosch GmbH, Bosch eBike Systems is un-
der license.
uAccessing other apps, reading pop up mes-
sages/other content, or otherwise using your
mobile device while operating an eBike may be
distracting. Distracted driving is a serious
safety concern and can lead to accidents caus-
ing serious injury or death. In order to prevent
distracted driving, most mobile devices come
equipped with a “Do Not Disturb” mode. The “Do
Not Disturb” mode should be used while operat-
ing an eBike. Please consult your device-specific
instructions for more information. You, as the eBike
operator, are fully responsible for ensuring that you
pay attention to road conditions and comply with
traffic laws at all times.
uDo not enter information or make selections
while riding. Interacting with the display unit while
riding can lead to accidents causing serious injury
or death. You must observe road and traffic condi-
tions, and comply with traffic laws at all times.
uPlease note that certain State or local laws may re-
quire that classIII eBikes must be equipped with a
functioning speedometer that displays speed in
miles per hour. Riders must be aware of any and all
applicable rules and regulations related to the oper-
ation or use of classIII eBikes in any applicable ju-
risdictions before operating or otherwise using this
product.
uObserve all national regulations which set out
the approved use of eBikes.
Safety warnings for charging the battery
inside the remote control
uOnly charge the remote control with USB power
source (5V, 600mA max) and USB cable rated
at least 600mA. Using USB power source or USB
cable not appropriately rated for the application
may result in fire, explosion or personal injury.
uCharge the remote control in temperatures
above +32degreesF (0degreesC) and below
+104degreesF (40degreesC). Store remote
control in locations where temperatures will not
exceed 104degreesF (40degreesC). This is im-
portant to prevent serious damage to the battery in
the remote control.
uDo not expose remote control to fire or exces-
sive temperature. Exposure to fire or temperature
above 212 °F (100 °C) may cause explosion.
uDo not recharge the remote control (via USB
port) in damp or wet environment. Water enter-
ing remote control may result in electric shock or
fire.
uNever submerge remote control in fluid of any
kind or allow fluid to enter them. Corrosive or
conductive fluid (such as seawater or industrial
chemical or bleach containing products, etc.) can
cause short circuit which may result in fire, per-
sonal injury and property damage.
uBattery leakage may occur under extreme usage
or temperature conditions. Avoid contact with
skin and eyes. The battery liquid is caustic and
could cause chemical burns to tissues. If liquid
comes in contact with skin, wash quickly with soap
and water. If the liquid contacts your eyes, immedi-
ately flush eyes with water for a minimum of
15minutes and seek medical attention.
uBefore each use, check the remote control, ca-
ble and plug. If damage is detected, do not use the
remote control. Damaged remote control, charging
cables and plugs increase the risk of a fire, explo-
sion and personal injury.
Bosch eBike Systems 0 275 U07 3RP | (29.06.2023)

English – 6
uDo not disassemble remote control. No user ser-
viceable part inside. Incorrect reassembly or dam-
age may result in fire or explosion.
NOTICE: This device complies with part 15 of the
FCC Rules. Operation is subject to the following two
conditions:
1. This device must not cause harmful interference,
and
2. this device must accept any interference received,
including interference that may cause undesired
operation.
NOTICE: Changes or modifications made to this
equipment not expressly approved by the Robert
Bosch GmbH may void the FCC authorization to oper-
ate this equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are de-
signed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accor-
dance with the instructions, may cause harmful inter-
ference to radio communications. However, there is
no guarantee that interference will not occur in a par-
ticular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following mea-
sures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is con-
nected.
– Consult the dealer or an experienced radio/TV tech-
nician for help.
Radiofrequency radiation exposure Information:
The radiated output power of the device is far below
the FCC radio frequency exposure limits. Neverthe-
less, the device shall be used in such a manner that
the potential for human contact during normal opera-
tion is minimized.
This equipment complies with FCC radiation expo-
sure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
ISED Notice (Canada)
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two con-
ditions:
1. this device may not cause interference, and
2. this device must accept any interference, including
interference that may cause undesired operation
of the device.
This equipment complies with Canada radiation expo-
sure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Privacy notice
When connecting the eBike to the Bosch Diagnostic-
Tool3 or when exchanging eBike components, tech-
nical information about your eBike (e.g. manufac-
turer, model, bike ID, configuration data) as well as
regarding the use of the eBike (e.g. total travel time,
energy consumption, temperature) is transmitted to
Bosch eBike Systems (Robert Bosch GmbH) for pro-
cessing your request, in service cases and for the pur-
poses of product improvement. More information on
data processing can be found at
www.bosch-ebike.com/privacy-full.
0 275 U07 3RP | (29.06.2023) Bosch eBike Systems

English – 7
Product Description and Specifications
Product Features
(1)
(2)
(4)
(5)
(6)
(8)
(7)
(9)
(10)
(3)
All illustrations of bike parts except for the drive unit,
on-board computer including operating unit, speed
sensor and the corresponding holders are schematic
and may differ on your eBike.
(1) On/off button
(2) Display
(3) Ambient light sensor
(4) Select button
(5) Button for increasing assistance +/
bicycle lights
(6) Button for decreasing assistance –/
push assistance
(7) Holder
(8) Diagnostics connection (for servicing pur-
poses only)
(9) Button to reduce brightness/
go back
(10) Button to increase brightness/
go forward
Bosch eBike Systems 0 275 U07 3RP | (29.06.2023)

English – 8
Intended Use
ThePurion200control unit is designed for control-
ling an eBike and, as an option, for controlling an ad-
ditional on-board computer from the system genera-
tion the smart system. If you use your smartphone
as an on-board computer, you can use
thePurion200control unit to change the assistance
level in the eBike Flowapp.
In order to be able to use the control unit to its fullest
extent, a compatible smartphone with the eBike
Flowapp is required.
You can connect the Purion200operating unit with
your smartphone via Bluetooth®.
Depending on the operating system of the
smartphone, the eBike Flow app can be
downloaded free of charge from the Apple
App Store or Google Play Store.
Scan the code with your smartphone to download the
eBike Flow app.
Technical Data
Control unit Purion 200
Product code BRC3800
Max. charging current of
USB portA) mA 600
USB port charging voltageA) V 5
USB charging cableB) USB Type-C® C)
Charging temperature °F 32 to 113
Operating temperature °F 23 to 104
Storage temperature °F 50 to 104
Diagnostic interface USB Type-C® C)
Internal lithium-ion battery V
mAh
3.7
75
Protection rating IP55
Dimensions (without fasten-
ing)
in 3.3× 2.1×
2.4
Weight lb 0.11
Bluetooth® Low Energy 5.0
– Frequency MHz 2400–2480
Control unit Purion 200
– Transmission power mW 1
A) Information for charging the Purion200operating unit; ex-
ternal devices cannot be charged.
B) Not included with the product as standard
C) USB Type-C® and USB-C® are trademarks of USB Imple-
menters Forum.
The license information for the product is available at the follow-
ing Internet address: www.bosch-ebike.com/licences
Certification information
FCC and IC ID (e-labels) can be found in the status
screen under <Settings>→ <Information>→ <Cer-
tificates>. Scroll through all e-labels by briefly press-
ing the scroll on button(10).
Note: If you wish to access information from the e-la-
bel of Purion200, you may first have to remove any
additional on-board computer or, if using a smart-
phone, close the ride screen in the eBike Flow app.
0 275 U07 3RP | (29.06.2023) Bosch eBike Systems

English – 9
Operation
Requirements
The eBike can then only be switched on when the fol-
lowing requirements are met:
– A sufficiently charged eBike battery is inserted (see
operating instructions for the eBike battery of the
system generation the smart system).
– The speed sensor is connected properly (see oper-
ating instructions for the drive unit of the system
generation the smart system).
Before setting off, make sure that you can easily
reach the buttons on the operating unit. It is recom-
mended to align the plus/minus buttons level so that
it is almost perpendicular to the ground.
Control unit power supply
If a sufficiently charged eBike battery is inserted into
the eBike and the eBike is switched on, the internal
battery of the operating unit is powered and charged.
If the state of charge of the internal battery of the op-
erating unit is very low, you can charge it via the diag-
nostics connection(8) with a USB Type-C® cable us-
ing a power bank or another suitable power source
(charging voltage5V; charging current
max.600mA).
Always close the flap of the diagnostics connec-
tion(8) so that no dust or moisture can enter.
Switching the eBike on/off
To switch on the eBike, briefly press the on/off but-
ton(1). The eBike is ready to ride once the start-up
animation is complete.
The display brightness is controlled by the ambient
light sensor(3). Therefore, do not cover the ambient
light sensor(3).
The drive is activated as soon as you start pedaling
(except at assistance level OFF). The drive output de-
pends on the settings of the assistance level.
As soon as you stop pedaling when in normal opera-
tion, or as soon as you have reached a speed of
20/28mph, the drive switches off the assistance.
The drive is automatically re-activated as soon you
start pedaling again and the speed is below
20/28mph.
To switch off the eBike, press the on/off button(1)
briefly (<3s).
If no power is requested from the drive for approx.
10minutes (e.g. due to the eBike being stationary)
and no button is pressed, the eBike switches off auto-
matically.
Quick menu
Selected settings are displayed on the quick menu.
These settings can also be changed while riding.
The quick menu can be accessed with a long press
(>1s) of the select button .
It cannot be accessed from the status page.
The following settings can be changed via the quick
menu:
–<Reset trip>
All data on the distance traveled so far is set to zero.
–<eShift> (optional)
The settings are dependent on the respective gear-
shifting.
Note: Depending on the configuration of your eBike,
additional functions may be available.
Displays
Note: All interface displays and texts on the following
pages correspond to the release status of the soft-
ware. The interface displays and texts may change
slightly following a software update.
If you did not select another page before the last time
you switched off, you will be shown this page.
Bosch eBike Systems 0 275 U07 3RP | (29.06.2023)

English – 10
Start page
TURBO
80%
km/h
21.4
(a)
(e)
(c)
(d)
(f)
(b)
(a) State of charge of eBike battery
(b) Assistance level
(c) Unit of speed indicator
(d) Your performance
(e) Speed
(f) Drive power
You can view other screens by pressing the or
buttons.
The following additional screens are available for you
to view:
– Status screen: The status of the connected devices
is shown here.
– Distances screen
– Rides screen
– Range screen
– eBike battery screen
– Power screen
– Cadence screen
– Total distances screen
– ABS screen (optional)
Selecting the assistance level
You can set how much the eBike drive assists you
while pedaling by pressing the increase assistance
level +(5) and reduce assistance level –(6)buttons
on the control unit. The assistance level can be
changed at any time, even while cycling, and is dis-
played in color.
Level Notes
OFF The drive support is switched off. The
eBike can just be moved by pedaling, as
with a normal bicycle.
ECO Effective support with maximum effi-
ciency, for maximum range
TOUR Steady support, long range for touring
TOUR+ Dynamic support for normal riding and
biking sports
eMTB Optimal support whatever the terrain,
rapid acceleration when starting from a
standstill, improved dynamics and top
performance
SPORT Powerful assistance, for mountain biking
and for cycling in urban traffic
TURBO Maximum support even at a high cadence,
for sport cycling
AUTO The assistance is adapted dynamically to
the riding situation.
RACE Maximum support on the eMTB race
course; very direct response behavior and
maximum "extended boost" for the best
possible performance in competitive situ-
ations
CARGO Steady, powerful support, to be able to
transport heavy weights
SPRINT Dynamic support depending on the ca-
dence – for sport-based eGravel and
eRoad riding with quick sprints and fre-
quent ascents
0 275 U07 3RP | (29.06.2023) Bosch eBike Systems

English – 11
Note: The available modes are dependent on the re-
spective drive unit.
The designations and configuration of the assistance levels can
be preconfigured by the manufacturer and selected by the bicy-
cle retailer.
Adjusting the assistance level
The assistance levels can be adjusted within certain
parameters using the eBike Flowapp. You therefore
have the option of adjusting your eBike to your per-
sonal requirements.
Creating a mode that is totally your own is not possi-
ble. You can only adjust the modes that have been en-
abled on your system by the manufacturer or the
dealer. This may even be fewer than 4 modes.
It may also be the case that a mode cannot be ad-
justed due to restrictions in your country.
The following parameters are available to you for ad-
justment:
– Support in relation to the basic value of the mode
(within the legal specifications)
– Response behavior of the drive
– Throttling down speed (within the legal specifica-
tions)
– Maximum torque (within the framework of the drive
limits)
Note: Please ensure that your changed mode retains
the position, name and color on all on-board comput-
ers and operating elements.
Interaction of the drive unit with the gear-
shifting
You should shift through gears on an eBike in the
same manner as when using a normal bicycle (ob-
serve the operating instructions of your eBike with re-
gard to this point).
Irrespective of the type of gear shifting, it is advisable
that you briefly reduce the pressure on the pedals
when changing gear. This will aid gear shifting and re-
duce wear on the powertrain.
By selecting the correct gear, you can increase your
speed and range while applying the same amount of
force.
Therefore, follow the gear-shifting recommendations
that are displayed to you on your on-board computer.
Switching bike lights on/off
Before starting each journey, check that your bike
lights are working correctly.
To switch on the bicycle lights, press the bicycle
lights button (5) for more than 1s.
Switching the push assistance on/off
The push assistance aids you when pushing your
eBike. The maximum speed of the push assistance is
3.7mph. The manufacturer's default setting can be
lower and may need to be adjusted by the bicycle re-
tailer.
uThe push assistance function must only be used
when pushing the eBike. There is a risk of injury if
the wheels of the eBike are not in contact with the
ground while using the push assistance.
uIf the selected gear is too high, the drive unit
may not be able to move the eBike or activate
the roll-away lock.
To start walk assistance, press the walk assis-
tance(6)button for more than 1s, keep it pressed
and follow the instructions on the display.
To activate push assistance, one of the following ac-
tions must occur within the next 10s:
– Push the eBike forward.
– Push the eBike backward.
– Perform a sideways tilting movement with the
eBike.
After activation, the drive begins to push and the indi-
cator on the display changes.
If you release the push assistance button(6), push
assistance is paused. You can reactivate push assis-
tance within 10s by pressing the push assistance
button(6).
If you do not reactivate push assistance within 10s,
push assistance automatically switches off.
Push assistance is always ended if:
– the rear wheel jams;
– the bicycle cannot move over ridges;
Bosch eBike Systems 0 275 U07 3RP | (29.06.2023)

English – 12
– a body part is blocking the bicycle crank;
– an obstacle continues to turn the crank;
– you start pedaling;
– the "Increase assistance" +/bicycle lights but-
ton(5) or on/off button(1) is pressed.
Push assistance has a roll-away lock, which means
that even after successfully using push assistance,
the drive actively brakes backward rolling for a few
seconds and you cannot push the eBike backward or
can only do so with difficulty.
The roll-away lock can be immediately deactivated by
pressing the "Increase assistance" +/bicycle lights
button(5).
The push assistance function is subject to local regu-
lations; the way it works may therefore differ from the
description above. It can also be deactivated.
ABS – Anti-lock braking system (optional)
If the eBike is fitted with a Bosch eBike ABS from the
system generation the smart system, the ABS sym-
bol lights up when the eBike system starts.
After moving off, the ABS internally checks its func-
tionality and the ABS symbol goes off.
In the event of an error, the ABS symbol lights up and
a message appears on the display. This means that
the ABS is inactive. You can press the select but-
ton(4) to acknowledge the error and the ABS error
message disappears. The ABS symbol appears in the
statusbar to notify you that the ABS is still switched
off.
For details on the ABS and how it works, please refer
to the ABS operating instructions.
0 275 U07 3RP | (29.06.2023) Bosch eBike Systems

English – 13
Establishing a smartphone connection
In order to be able to use the following eBike func-
tions, a smartphone with the eBike Flowapp is re-
quired.
Connection to the app occurs via a Bluetooth® con-
nection.
Switch on the eBike without maneuvering it.
Begin Bluetooth® pairing by long pressing (>3s) the
on/off button(1). When the status of the pairing
process is displayed, release the on/off button(1).
Confirm the connection request in the app.
Activity tracking
In order to record activities, it is necessary to register
and log into the eBike Flowapp.
To record activities, you must consent to the storage
of your location data in the app. Without this, your ac-
tivities cannot be recorded in the app. For location
data to be recorded, you must be logged in as the
user.
eBike Lock
<eBike Lock> can be activated for all users via the
eBike Flow app. A key to unlock the eBike is saved on
the smartphone for this purpose.
<eBike Lock> is automatically active in the following
cases:
– When switching off the eBike via the operating unit
– When automatically switching off the eBike
The eBike is unlocked when the eBike is switched on
and the smartphone is connected with the eBike via
Bluetooth®.
<eBike Lock> is connected to your user account.
Should you lose your smartphone, you can log in via
another smartphone using the eBike Flow app, and
unlock your user account and the eBike.
Warning! If you select a setting in the app that leads
to disadvantages for the <eBike Lock> (e.g. deletion
of your eBike or user account), then you will first be
shown warning messages. Please read through
these thoroughly and adhere to the warnings that
are issued (e.g. before deleting your eBike or user
account).
In order to be able to set up the <eBike Lock>, the
following conditions must be fulfilled:
– The eBike Flow app has been installed.
– A user account has been created.
– No update is currently being carried out on the
eBike.
– The eBike is connected to the smartphone via
Bluetooth®.
– The eBike is stationary.
– The smartphone is connected to the Internet.
– The eBike battery is sufficiently charged, and the
charging cable is not connected.
You can set up <eBike Lock> in the eBike Flow app
under the <Settings> menu item.
You can deactivate the support of your drive unit with
immediate effect by switching on <eBike Lock> in
the eBike Flow app. Deactivation can only be can-
celed if your smartphone is nearby when switching on
the eBike. Your smartphone must have Bluetooth®
switched on for this, and the eBike Flow app must be
active in the background. The eBike Flow app does
not have to be opened. If <eBike Lock> is activated,
you can also use your eBike without support from the
drive unit.
Compatibility
<eBike Lock> is compatible with these Bosch eBike
product lines from the system generation the smart
system:
Drive unit Product line
BDU374x Performance Line CX
BDU33xx Performance Line
Active Line
Active Line Plus
BDU31xx Performance Line SX
How it works
In conjunction with <eBike Lock>, the smartphone
works in a similar way to a key for the drive unit.
Bosch eBike Systems 0 275 U07 3RP | (29.06.2023)

English – 14
The<eBike Lock> is activated by switching off the
eBike. As long as the<eBike Lock> is active after the
function is switched on, this will be indicated by a
padlock symbol on thePurion200control unit.
Note: <eBike Lock> alone does not provide ade-
quate theft protection; it is simply a supplement to a
mechanical lock. <eBike Lock> does not provide any
form of mechanical lock for the eBike. Only the assis-
tance from the drive unit is deactivated. As long as
the smartphone is connected with the eBike via
Bluetooth®, the drive unit is unlocked.
If you wish to give other users temporary or per-
manent access to your eBike or you want to take
your eBike to a service, you will need to deactivate
the<eBike Lock> in the eBike Flowapp in
the<Settings>menu item. If you wish to sell your
eBike, you will also need to delete the eBike from
your user account in theeBike Flowapp in the<Set-
tings>menu item.
When the eBike is switched off, the drive unit will
emit a "Lock" sound (i.e. an audio signal that is played
once) to indicate that the assistance from the drive
unit is switched off.
Note: The audio signal will only be played if the eBike
is switched on.
When the eBike is switched on, the drive unit will emit
two "Unlock" sounds (i.e. an audio signal that is
played twice) to indicate that the assistance from the
drive unit is enabled again.
The "Lock" sound helps you to recognize whether
<eBike Lock> is activated on your eBike. The audio
signal is activated by default, but it can be deacti-
vated in theeBike Flowapp in the<Settings>menu
item by selecting the lock symbol under your eBike.
Note: If you are no longer able to set up or switch off
<eBike Lock>, please contact your bicycle dealer.
Replacing eBike components and <eBike Lock>
Replacing the smartphone
1. Install the eBike Flow app on the new smart-
phone.
2. Log in using the same account with which you acti-
vated <eBike Lock>.
3. <eBike Lock> is displayed as set up in the eBike
Flow app.
Replacing the drive unit
1. <eBike Lock> is displayed as deactivated in the
eBike Flow app.
2. Activate <eBike Lock> by pushing the <eBike
Lock> control unitto the right.
3. If you are handing in your eBike to a bicycle dealer
for maintenance, it is recommended that you tem-
porarily deactivate<eBike Lock>.
If you have activated the <eBike Alarm>, you will be
able to see this on the Purion200.
More information about this can be found in the
eBike Flow app or in the Help Center on the website
www.bosch-ebike.com/en/help-center.
Software updates
Software updates must be started manually in the
eBike Flowapp.
Software updates are transferred from the app to the
control unit in the background as soon as it is con-
nected to the app. During the software update, keep
watching the display on the control unit Purion200.
The eBike is then restarted.
You can control the software updates via the eBike
Flowapp.
0 275 U07 3RP | (29.06.2023) Bosch eBike Systems

English – 15
Troubleshooting
The error messages are displayed in a pop-up on the
Purion200 control unit.
The operating unit shows whether critical errors or
less critical errors occur on the eBike.
The error messages generated by the eBike can be
read via the eBike Flowapp or by your bicycle re-
tailer.
Via a link in the eBike Flowapp, information about
the error and support for rectifying the error can be
displayed.
Less critical errors
Errors are acknowledged by pressing the select but-
ton (4).
You can use the following table to rectify the errors
yourself if necessary. Otherwise, please contact your
bicycle retailer.
Number Troubleshooting
523005 The indicated error numbers show that
there is interference when the sensors
detect the magnetic field. See whether
you have lost the magnet while riding.
If you are using a magnet sensor, check
that the sensor and magnet have been
properly installed. Make sure too that
the cable to the sensor is not damaged.
If you are using a rim magnet, make
sure that you do not have any magnetic
field interference in the vicinity of the
drive unit.
514001
514002
514003
514006
Critical errors
If a critical error occurs, follow the handling instruc-
tions on the following table.
Number Handling instructions
660002 Please do not charge or use your bat-
tery any further.
Please contact your specialist retailer.
6A0004 Remove the PowerMore battery and
restart your eBike.
Number Handling instructions
If the problem persists, please contact
your specialist retailer.
890000 – Acknowledge the error code.
– Restart the eBike system.
If the problem persists:
– Acknowledge the error code.
– Perform the software update.
– Restart the eBike system.
If the problem persists:
– Please contact a Bosch eBike sys-
tems specialist retailer.
Bosch eBike Systems 0 275 U07 3RP | (29.06.2023)

English – 16
Maintenance and Service
Maintenance/cleaning
WARNING
uDo not open any of the components. Service
should only be carried out at an authorized
Bosch eBike dealer. Failure to follow above warn-
ing can cause death or serious injury. Refer to your
bicycle manual or component manual for all non-
Bosch drive system components.
uDo not paint any components of the Bosch drive
system as they may cause premature failure of
the component.
uDo not submerge your eBike components in wa-
ter, or wash with pressurized hose. Your Bosch
drive unit is designed to be water tight to rain water
or non-pressure hose washing.
Do not clean any of the components with pressurized
water.
Keep the display of your control unit clean. Dirt can
cause faulty brightness detection.
Clean your control unit using a soft cloth dampened
only with water. Do not use cleaning products of any
kind.
Have your eBike checked by an expert at least once a
year (including mechanical parts, up-to-dateness of
system software).
The bike retailer can also schedule the service based
on a mileage and/or a time period. In this case, the
control unit displays a message telling you when the
service date is due each time it is switched on.
Please have your eBike serviced and repaired by an
authorized bicycle dealer.
uOnly have repairs performed by a certified bicy-
cle dealer.
Note: If you hand over your eBike to a bicycle dealer
for maintenance, it is recommended to temporarily
deactivate <eBike Lock> and <eBike Alarm> to
avoid a false alarm.
After-sales service and advice on using products
If you have any questions about the eBike and its
components, contact an authorized bicycle retailer.
For contact details of authorized bike dealerships,
please visit www.bosch-ebike.com.
Please contact an authorized bicycle dealer if the
eBike battery is no longer working.
Battery Recycling Program
The drive unit, on-board computer incl.
operating unit, eBike battery, speed sen-
sor, accessories and packaging should be
disposed of in an environmentally correct
manner.
Do not dispose of eBikes and their components with
household waste.
You may recycle your Bosch battery
pack by calling 1.800.822.8837.
0 275 U07 3RP | (29.06.2023) Bosch eBike Systems

Français – 1
Table des matières
Introduction ..................................................................................................................................... 2
À propos des avertissements.......................................................................................................... 2
Avertissements généraux............................................................................................................... 2
Utilisez votre notice d’utilisation ..................................................................................................... 3
Utilisation de votre système d’entraînement Bosch................................................................................. 4
Consignes de sécurité ................................................................................................................... 4
Description des prestations et du produit......................................................................................... 8
Fonctionnement......................................................................................................................... 10
Établissement de la connexion avec le smartphone.......................................................................... 13
Messages d'erreur ...................................................................................................................... 16
Entretien et service après‑vente ........................................................................................................ 17
Maintenance/nettoyage............................................................................................................... 17
Service après-vente et conseil utilisateurs...................................................................................... 17
Programme de recyclage des accus............................................................................................... 17
Bosch eBike Systems 0 275 U07 3RP | (29.06.2023)

Français – 2
Introduction
À propos des avertissements
Cette notice contient de nombreuses mentions de
danger de type DANGER, AVERTISSEMENT et AT-
TENTION destinées à attirer l’attention sur les consé-
quences d’erreurs, dans le but d’utiliser, d’assembler,
d’entretenir, de conserver et d’éliminer dans les
règles et en toute sécurité les vélos électriques dotés
d’un système eBike Bosch.
– Le symbole de sécurité et le mot DANGER si-
gnalent une situation à risque élevé, qui entraîne in-
évitablement des blessures graves, voire la mort, si
elle n’est pas évitée.
– Le symbole de sécurité et le mot AVERTISSEMENT
signalent une situation à risque élevé, pouvant en-
traîner des blessures graves, voire la mort, si elle
n’est pas évitée.
– Le symbole de sécurité et le mot ATTENTION si-
gnalent une situation à risque modéré pouvant en-
traîner des blessures légères ou modérées si elle
n’est pas évitée.
Avertissements généraux
Lisez tous les avertissements de sé-
curité et toutes les instructions. Le
fait de ne pas respecter les avertisse-
ments et les instructions peut entraîner
des blessures graves ou mortelles.
Conservez tous les avertissements et toutes les
instructions pour pouvoir s’y reporter ultérieure-
ment.
Le terme batterie VAE utilisé dans cette notice dé-
signe toutes les batteries VAE Bosch d’origine de la
génération the smart system (le système intelli-
gent).
uLisez TOUS les manuels et TOUTES les notices
jointes avant d’utiliser votre vélo pour la pre-
mière fois. Votre système d’entraînement Bosch
est livré avec d’autres manuels et documents four-
nis par le fabricant du vélo et des autres éléments.
Ne pas lire ou ne pas comprendre les informations
de sécurité peut entraîner des blessures graves ou
mortelles.
AVERTISSEMENT
uCette notice contient d’importantes informa-
tions sur la sécurité, les performances et l’entre-
tien. Veuillez la lire avant d’utiliser votre vélo pour
la première fois, et la conserver pour référence ul-
térieure. Vous pouvez également retrouver cette
notice en ligne à l’adresse www.bosch-ebike.com.
uCette notice est destinée à être lue conjointe-
ment avec le manuel utilisateur séparé fourni
avec votre vélo. Assurez-vous de lire tous les do-
cuments fournis y compris les étiquettes apposées
sur le produit avant la première utilisation.
uAssumez la responsabilité de votre propre SÉ-
CURITÉ. En cas de question ou d’incompréhension,
contactez votre revendeur ou le fabricant du vélo
ou de l’élément.
uCertains accessoires de l’eBike peuvent présen-
ter un risque d’étouffement pour les petits en-
fants. Conservez ces accessoires hors de portée
des enfants.
ATTENTION
uLe système d’entraînement Bosch alourdit votre
vélo. Vous n’avez peut-être pas l’habitude de le
soulever. Évitez de vous blesser en utilisant des
techniques de levage appropriées.
0 275 U07 3RP | (29.06.2023) Bosch eBike Systems