Avoiding material damage en
Printed on 100% recycled paper 7
▶Never let the power cord come into contact with hot parts or be
dragged over sharp edges.
▶Never place the appliance on or near hot surfaces.
▶After switching off, wait until the drive has come to a complete
standstill.
▶Keep hands, hair, clothing and utensils away from rotating parts.
▶Never touch the edges of the blades with bare hands.
▶Care should be taken when handling sharp blades, emptying the
container and during cleaning.
▶Be careful when processing hot food.
▶Leave boiling food to cool down to at least 70°C before pro-
cessing.
▶Follow the cleaning instructions.
▶Clean surfaces which come in contact with food before each
use.
Avoiding material damage
▶Do not operate the appliance at no-load.
▶Never use the blender jug in the mi-
crowave or oven.
Overview
→Fig. 1
Main unit1
On button
Plastic blender foot, stainless-steel
blender foot or mini blender foot1
Lid1
Plastic blender jug1
Stainless-steel blender jug1
Whisk12
Universal cutter12
1Depending on the model
2separate operating instructions
Note:If an accessory is not included in the
scope of supply, it can be ordered from
customer service.
Blender feet
Note:The blender feet are not suitable for
preparing purées consisting only of pota-
toes or foods with a similar consistency.
Plastic or stainless-steel blender foot
The blender feet are suitable for the
following purposes:
¡Mixing drinks
¡Making pancake batter, mayonnaise,
sauces and baby food
¡Puréeing cooked food, e.g. fruit, veget-
ables, soup
Mini blender foot
The mini blender foot is suitable for making
small quantities of dips, sauces, pesto,
dressings and baby food.
Note:Use the mini blender foot for pro-
cessing small quantities in small jugs.
Processing food with the blender foot
Notes
¡Solid foods should always be cut up and
cooked until soft before processing, e.g.
apples, potatoes or meat.
¡Use the universal cutter for cutting up
raw food without adding liquid, e.g.
onions, garlic or herbs.
