
Avoiding material damage en
Printed on 100% recycled paper 7
▶Only use genuine spare parts when repairing the appliance.
▶If the power cord of this appliance is damaged, it must be re-
placed by the manufacturer, the manufacturer's Customer Ser-
vice or a similarly qualified person in order to prevent any risk.
▶Never immerse the appliance or the power cord in water or clean
in the dishwasher.
▶Only use the appliance in enclosed spaces.
▶Never expose the appliance to intense heat or humidity.
▶Do not use steam- or high-pressure cleaners to clean the appli-
ance.
▶Never let the power cord come into contact with hot appliance
parts or heat sources.
▶Never let the power cord come into contact with sharp points or
edges.
▶Never kink, crush or modify the power cord.
▶Never place the appliance on or near hot surfaces.
▶Parts which show cracks or other damage or do not fit correctly
must be replaced with genuine spare parts.
▶When cleaning and emptying the blender jug, watch out for the
sharp blades.
▶Never touch the edges of the blades with bare hands.
▶Keep packaging material away from children.
▶Do not let children play with packaging material.
▶Keep small parts away from children.
▶Do not let children play with small parts.
▶Follow the cleaning instructions.
▶Clean surfaces which come in contact with food before each
use.
Avoiding material damage
Avoiding material damage
Avoiding material damage ▶Do not operate the appliance at no-load.
▶Observe the maximum processing
quantities.
▶Never use the To-Go blender jug with
blade insert in a microwave or oven.
▶Do not use the To-Go blender jug with
blade insert to store objects which do
not belong to it.
▶Do not process food that is hotter
than50°C in the To-Go blender jug.
Overview
Overview
Overview
You can find an overview of the parts of
your appliance here.
→Fig. 1
Base unit
To-Go blade insert
Seal
Lid with seal and closable mouth-
piece