Bosch MUM59 GB Series User manual

Register your
new device on
MyBosch now and
get free benefits:
bosch-home.com/
welcome
MUM59...GB
Universal kitchen machine
[en] Instruction manual
[ms] Arahan pengendalian
[zf] 使用說明書
[zh] 使用说明书
[ar] 
Universal kitchen machine 10
Pemproses makanan sejagat 22
廚師機 35
多功能食物料理机（全能厨师机） 44
 66

550-2700 g
350-550 g
350-1000 g
100-600 ml 7 1-6 min
5 4-6 min
1 30 s
33-6 min
1 30 s
3 5-6 min
1 30 s
3 6-7 min
1 30 s
3 4-5 min
1 30 s
7 4-6 min
1-8 x
560-1100 g
350-1000 g
L

1000 g 7
1000 g 5
1000 g 5
1000 g 5
1000 g 6
1000 g 7
1000 g 6
1000 g 5
800 g 7
1000 g 7
1000 g 6
1000 g 6
1000 g 6
800 g 7
1000 g 7
1000 g 5
M

5-10 x 10 g 2-4 x 2 sM
300-1000 g 45-120 s7
300-1000 g 45-120 s7
300-1250 g 45-120 s7
300-1250 g 45-120 s7
300-750 g 45-120 s7
150 s7
1 x
350-1000 g 45-90 s7
N

O

10
en Intended use
Intended use
This appliance is intended for domestic use only. Use the appliance
only for processing normal amounts of food and for normal amounts
of time for domestic use.
The appliance is suitable for mixing, kneading and beating food.
The appliance must not be used for processing other substances
or objects. Additional applications are possible if the accessories
approved by the manufacturer are used. Only use the appliance with
approved genuine parts and accessories. Never use the accessory
parts for other appliances.
Only use the appliance indoors at room temperature and up to
2000 m above sea level.
Important safety information
Read and follow the instruction manual carefully and keep for later
reference! Enclose these instructions when you give this appliance to
someone else. If the instructions for correct use of the appliance are
not observed, the manufacturer’s liability for any resulting damage will
be excluded.
This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and/or knowledge
if they have been given supervision or instruction concerning use
of the appliance in a safe way and if they understand the hazards
involved. Keep children away from the appliance and connecting
cable and do not allow them to use the appliance. Do not let children
play with the appliance. Cleaning and user maintenance must not be
performed by children.
WRisk of electric shock and fire!
■Connect and operate the appliance only in accordance with the
specifications on the rating plate. Do not use the appliance if the
power cord and/or appliance are damaged. Only our customer
service may repair the appliance, e.g. by replacing a damaged
power cord, in order to avoid hazards.
■Use only the rotary switch to switch the appliance on or off. Never
connect the appliance to timer switches or remote-controllable
sockets. Never leave the appliance unattended while it is switched
on!
■Do not place the appliance on or near hot surfaces, e.g. hobs. The
power cord must not come into contact with hot parts or be pulled
across sharp edges.

11
Important safety information en
■Never immerse the base unit in water or place it in the dishwasher.
Do not steam-clean the appliance. Do not use the appliance with
damp hands.
■After each use, whenever the appliance is unsupervised, prior to
assembly, prior to disassembly, prior to cleaning and in the event
of an error, the appliance must always be disconnected from the
mains.
WRisk of injury!
■Before replacing accessories or additional parts which move during
operation, the appliance must be switched off and disconnected
from the power supply. After switching off, the drive continues for a
short time. Wait until the drive has come to a standstill.
■Do not adjust the swivel arm while the appliance is switched on.
■Only use tools when the bowl is inserted, the lid is fitted and the
protective drive covers are in place! When using accessories, fit
the bowl, lid and drive covers according to the instructions!
■While operating the appliance, never reach into the bowl or filling
shaft with your hands. Do not insert any objects (e.g. wooden
spoon) into the bowl or filling shaft. Keep hands, hair, clothing and
other utensils away from rotating parts.
■Never use tools and accessories or 2 accessories at the same
time. When using the accessories, follow the individual operating
instructions enclosed.
■The accessory must be completely assembled before use. Never
assemble the accessory on the base unit. The accessory should
only be used in the intended operating position.
■Do not grip the sharp blades or edges of the cutting discs. Take
hold of cutting discs by the edge only.
■Do not touch blender blades with bare hands.
■Never reach into the attached blender! Never use the blender
without the lid in place.
■Care shall be taken when handling the sharp cutting blades,
emptying the container and during cleaning.
WRisk of scalding!
If processing hot liquids, steam escapes through the funnel in the lid.
WRisk of suffocation!
Do not allow children to play with packaging material.
WCaution!
We recommend that the appliance is never switched on for longer
than is necessary to process the ingredients. Do not operate
at no-load.

12
en Important safety information
WImportant!
It is essential to clean the appliance thoroughly after each use or
after it has not been used for an extended period (X“Cleaning and
servicing” see page 18).
WExplanation of the symbols on the appliance or accessory
iFollow the instructions in the operating instructions.
YCaution! Rotating blades.
WCaution! Rotating tools.
Do not place fingers in the feed tube.
Safety systems
Start lock-out
See “Operating positions” table.
The appliance can be switched on in position
1and 3only:
■when the bowl (11) has been inserted
and turned until it locks into place.
Restart lock-out
If the power is interrupted, the appliance
remains switched on but the motor does
not start running again when the power is
restored. To switch the appliance on again,
turn the rotary switch to 0/off, then switch on.
Overload protection
If the motor switches itself off while the
appliance is being used, the overload
protection feature has been activated. A
possible cause may be that too much food
was processed at one time.
If a safety system is activated, see
“Troubleshooting”.
The appliance requires no maintenance.
Congratulations on the purchase of your
new Bosch appliance. In doing so, you
have opted for a modern, high-quality
domestic appliance. You can find further
information about our products on our
web page.
Contents
Intended use .............................................. 10
Important safety information ...................... 10
Safety systems........................................... 12
Overview .................................................... 13
Operating positions .................................... 13
Operation ................................................... 14
Bowl and tools ........................................... 14
Cleaning and servicing .............................. 18
Storage....................................................... 18
Troubleshooting ......................................... 18
Application examples ................................ 19
Special accessories ................................... 21
Disposal...................................................... 21
Guarantee .................................................. 21

13
Overview en
Overview
Fig. A
Base unit
1 Release button
2 Swivel arm
“Easy Armlift” function to support the
upward movement of the arm
(see “Work positions”).
3 Rotary switch
When the appliance has been switched
off (position 0/off), the appliance runs
automatically to the optimum position for
changing the tools.
0/off = Stop
M= Instantaneous switching at
maximum speed, hold switch for required
blending duration.
Settings 1-7, Operating speed:
1 = low speed – slow,
7 = high speed – fast.
4 Operating indicator
Is lit while the appliance is operating
(rotary switch on Mor 1-7). Flashes if the
appliance has been operated incorrectly,
the electronic fuse has tripped or the
appliance is defective – see section
“Troubleshooting”.
5 Drive cover
To remove the drive cover, press on the
rear area and remove cover.
6 Drive for
– continuous-feed shredder and
– citrus press (optional accessory*).
When not in use, attach the drive cover.
7 Drive for tools
(stirrer, whisk, kneading hook) and
mincer (optional accessory*)
8 Blender drive cover
9 Drive for blender
(optional accessory*)
When not in use, attach the blender drive
cover.
10 Automatic cord winder
Bowl with accessories
11 Stainless steel stirring bowl
12 Lid
Tools
13 Professional flexi stirring whisk
14 Professional beating whisk
15 Kneading hook with dough deflector
16 Accessories bag
For storage of the tools and cutting discs.
Continuous-feed shredder
17 Pusher
18 Cover with filling shaft
19 Cutting discs
a) Professional Supercut reversible
disc – coarse / fine
b) Reversible shredding disc –
coarse / fine
c) Fine grating disc
d) Grating disc – coarse*
e) Asia vegetables disc*
20 Disc holder
21 Housing with outlet opening
Blender*
22 Blender jug
23 Lid
24 Funnel
* If an accessory is not included in the
product package, it can be purchased via
the trade or customer service.
Operating positions
Figure B:
Attention:
Before operating the appliance, attach the
tool / accessory to the correct drive and
in the correct position and place in the
operating position according to this table.
The swivel arm must be engaged in every
operating position.
Note:
The swivel arm features an “Easy Armlift”
function which supports the upwards
movement of the swivel arm.

14
en Operation
Selecting the operating position:
■Press the Release button and move the
swivel arm. Support movement with your
hand.
■Move the swivel arm until it engages in
the required position.
Position Drive Tool /
Accessory
Operating
speed
17
1-7
1-5
1-3
27 * –
36
3-7
3-5
4
95-7
75-7
Insert / remove whisk, stirrer or kneading
hook.
Operation
W Risk of injury!
Do not insert mains plug until all preparations
for working with the appliance are complete.
W Attention!
Do not operate the appliance without an
accessory / tool in the operating position.
Do not operate the appliance empty. Do not
expose appliance or accessories to heat
sources. Parts are not microwave-safe.
■Before operating the appliance and
accessories for the first time, clean
thoroughly; see “Cleaning and servicing”.
Preparation
■Place the base unit on a smooth, clean
surface.
■Pull out the cord in one go to the required
length (max. 100 cm) and slowly release;
the cord is locked (Fig. C).
■Reducing the cord length:
Pull gently on the cord and allow it to roll
up to the required length. Then gently
pull the cord again and slowly release;
the cable is locked.
Warning!
Do not twist the cord when inserting it. If the
appliance features an automatic cord winder,
do not insert the cord manually. If the cord
jams, pull out the cord all the way and then
allow it to wind up.
■Insert the mains plug.
Bowl and tools
Observe the application examples in table L
W Risk of injury from rotating tools
While the appliance is operating, never place
fingers in the mixing bowl. Attach the cover
(12) before operating the appliance! Do not
change tools until the drive has come to a
standstill – when the appliance is switched
off, the drive continues running briefly and
stops in the tool change position. Do not
move the swivel arm until the tool has come
to a standstill.
Always secure unused drives with protective
drive covers.

15
Bowl and tools en
Attention!
Use bowl with this appliance only.
Professional flexi stirring
whisk (13)
for stiring mixtures, e.g. cake
mixture, fruit cake, … and folding in ingredi-
ents such as raisins and chocolate chips
Professional beating whisk (14)
for whisking egg whites and cream
(min. 30% fat content) and for
mixing sponge mixture
Kneading hook (15)
for kneading dough e.g. yeast
dough, bread dough, pizza dough,
pasta dough, pastry and folding in ingre-
dients such as seeds into the dough
Important information concerning
the use of the whisk
Figure D:
The whisk should almost touch the bottom
of the bowl to ensure that the ingredients are
optimally mixed. If not, adjust the height of
the whisk as follows:
■Remove mains plug.
■Press the Release button and
move the swivel arm to
position 2.
■Insert the whisk into the drive
until the whisk locks into position.
■Hold whisk in place and loosen nut
clockwise using open-ended wrench
(size 8).
■Set the whisk to the optimum height by
rotating the whisk:
– Turn clockwise: Raise
– Turn anti-clockwise: Lower
■Press the Release button and
move the swivel arm to
position 1.
■Check the height of the whisk
and, if required, correct.
■When the height has been set
correctly, press Release button
and move the swivel arm to
position 2.
■Hold whisk in place and tighten nut
anticlockwise using open-ended wrench
(size 8).
Working with the bowl and the
tools
Figure E:
■Press the Release button and
move the swivel arm to
position 2.
■Insert the bowl:
– Tilt the bowl forwards and then set it
down.
– Turn anti-clockwise until it locks into
place.
■Depending on the processing task, insert
the stirrer, whisk or kneading hook until it
locks into position.
Note:
If using the kneading hook, rotate the dough
deflector until the kneading hook can lock
into position (Fig. E-4b).
■Put the ingredients to be processed into
the bowl.
■Press the Release button and
move the swivel arm to
position 1.
■Attach the cover.
■Set the rotary switch to the desired
setting.
Adding more ingredients
■Switch off the appliance with the rotary
switch.
■Add more ingredients through the feed
tube in the cover.
or
■Remove lid.
■Press the Release button and
move the swivel arm to
position 2.
■Add ingredients.
After using the appliance
■Switch off the appliance with the rotary
switch.
■Remove mains plug.
■Remove lid.
■Press the Release button and
move the swivel arm to
position 2.

16
en Bowl and tools
■Take the tool out of the drive.
■Remove the bowl.
■Clean all parts, see “Cleaning and
servicing”.
Continuous-feed shredder
Observe the application examples in table M
W Risk of injury
Do not grip the sharp blades or edges of the
cutting discs. Take hold of cutting discs by
the edge only. Before attaching / removing
the continuous-feed shredder, wait until the
drive has come to a standstill and pull out the
mains plug. Do not reach into the feed tube.
Warning!
The continuous-feed shredder must be
completely assembled before use. Never
assemble the continuous-feed shredder on
the base unit. Operate the continuous-feed
shredder in the indicated operating position
only.
Predetermined breaking point
Figure F:
The built-in predetermined breaking point
protects the drive of the appliance. If an
overload occurs, the drive shaft of the
continuous-feed shredder breaks. However,
the drive shaft can easily be replaced.
A new disc holder with drive shaft is available
from customer service.
Professional Supercut
reversible disc –
coarse / fine
for cutting food into thick or thin slices, e.g.
fruit and vegetables.
Marking:
■Grob = thick slices
■Fein = thin slices
Note: Not suitable for processing hard
cheese, bread, rolls or chocolate.
Tip: Only cut up cooked potatoes once they
have cooled down.
Reversible shredding disc –
coarse / fine
for shredding food coarsely or finely, e.g.
fruit, vegetables or cheese as Gouda or
Edam.
Marking:
■2 = coarse side
■4 = fine side
Note: Not suitable for processing nuts or
hard cheese, e.g. Parmesan.
Tip: Shred soft cheese with the coarse side
only.
Fine grating disc
for shredding food finely, e.g. nuts or
hard cheese such as Parmesan.
Note: Not suitable for processing soft
cheese and cheese slices.
Grating disc – coarse
for grating raw potatoes, e.g. for
potato pancakes or dumplings.
Asia vegetables disc
for cutting food into thin strips, e.g.
fruit and vegetables.
Working with the continuous-feed
shredder
Figure G:
■Press the Release button and
move the swivel arm to
position 2.
■Insert the bowl:
– Tilt the bowl forwards and then set it
down.
– Turn anti-clockwise until it locks into
place.
■Press the Release button and
move the swivel arm to
position 3.
■Remove drive cover from the
drive of the continuous-feed shredder
(Fig. G-5a).
■Hold disc holder at the lower end,
ensuring that the two tips are face up.

17
Bowl and tools en
■Carefully place the required slicing
or shredding disc onto the tips of the
disc holder (Fig. G-6a). In the case of
reversible discs, ensure that the required
side is face up.
■Grip disc holder at the upper end and
insert into the housing (Fig. G-6b).
■Attach the cover (note mark) and turn all
the way in a clockwise direction.
■Place continuous-feed shredder on the
drive and rotate all the way in a clockwise
direction, as illustrated in Fig. G-8.
■Turn rotary switch to recommended
setting.
■Put food to be processed in the feed tube
and push down with the pusher.
W Warning!
Prevent the cut ingredients from building up
in the outlet opening.
Tip: To ensure even cutting results, process
thin ingredients in bunches.
Note: If the food to be processed sticks in
the continuous-feed shredder, switch food
processor off, pull out mains plug, wait until
the drive comes to a standstill, remove cover
from the continuous-feed shredder and
empty feed tube.
After using the appliance
■Switch off the appliance with the rotary
switch.
■Rotate the continuous-feed shredder in
an anti-clockwise direction and remove.
■Rotate the lid in an anti-clockwise
direction and remove.
■Remove disc holder with disc. To do this,
press finger from below against the drive
shaft (Fig. H).
■Clean parts.
Blender
Observe the application examples in table N
W Risk of injury from sharp blades /
rotating drive!
Never place fingers in the attached blender!
Do not remove / attach the blender until
the drive is at a standstill! Operate the
assembled blender only and with the lid
attached. Do not operate blender when
empty.
W Risk of scalding!
If processing hot liquids, steam escapes
through the funnel in the lid.
Working with the blender
Figure J:
■Press the release button and
move the swivel arm to
position 4.
■Remove the blender drive cover.
■Attach blender jug (mark on the handle
on mark on the base unit) and turn all the
way in an anti-clockwise direction.
■Add ingredients.
Maximum capacity – liquid = 1.25 litres;
maximum capacity frothing or hot liquids
max. 0.75 litres.
■Attach the cover and turn anti-clockwise
all the way into the blender handle. The
cover must be locked in position.
■Set the rotary switch to the desired
setting.
Adding more ingredients
Figure J-8:
■Switch off the appliance with the rotary
switch.
■Remove the lid and add ingredients.
or
■remove the funnel and gradually add
solid ingredients through the refill
opening.
or
■pour liquid ingredients through the funnel.
After using the appliance
■Switch off the appliance with the rotary
switch.
■Rotate the blender in a clockwise
direction and remove.
Tip: It is recommended to clean the blender
immediately after use.
W Attention!
Using unsuitable food may damage the
appliance.
■Do not process food that is hotter than
70°C in the blender jug.
■Do not process frozen ingredients, apart
from ice cubes, unless they have been
added into a sufficient amount of liquid.

18
en Cleaning and servicing
■Do not process food that contains hard
components. Before processing pip
and stone fruits (apples, peaches, etc.),
remove the pips or stones.
Notes
Restrictions on processing:
■Do not use it to chop ingredients like
almonds, onions, parsley and meat.
■The blender cannot produce spreads,
such as peanut butter,coconut butter or
nut spreads.
■Use enough liquid when mixing solid
food.
■Mix powdered food with sufficient liquid
before blending, or dissolve it entirely
in liquid. Examples of powdered food
include icing sugar, cocoa powder,
roasted soy-beans, flour, protein powder.
Cleaning and servicing
The attachments and accessories used
must be thoroughly cleaned after each use.
XTable O
Attention!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Cleaning the base unit
W Risk of electric shock!
Never immerse the base unit in water or
place under running water. Do not use a
steam cleaner.
■Remove mains plug.
■Wipe the base unit and drive cover with
a damp cloth. If required, use a little
detergent.
■Then dry the base unit.
Cleaning the bowl and tools
The bowl and tools are dishwasher-proof.
Do not wedge plastic parts in the
dishwasher, as they could be permanently
deformed during the washing process!
Cleaning the continuous-feed
shredder
All parts of the continuous-feed shredder are
dishwasher-proof.
Tip: To remove the red film after processing
e.g. carrots, pour a little cooking oil on a
cloth and rub the film off the continuous-feed
shredder (not the cutting discs). Then rinse
the continuous-feed shredder.
Cleaning the blender
W Risk of injury from sharp blades!
Do not touch blender blades with bare
hands.
The blender jug, lid and funnel are
dishwasher-proof.
Tip: After processing liquids, it is often suffi-
cient to clean the blender without removing
it from the appliance. Pour 700ml of water
and a drop of washing-up liquid into the
attached blender. Switch on the blender for
aproximately 1 minute (setting 7). Pour out
the water and rinse out the blender with clear
water.
Important information
If required, clean accessories bag. Follow
care instructions in the bag.
Storage
W Risk of injury!
When the appliance is not in use, pull out the
mains plug.
Figure K:
■Store tools and cutting discs in the
accessories bag.
■Keep accessories bag in the bowl.
Troubleshooting
W Risk of injury!
Before eliminating a fault, pull out the mains
plug.
Note:
The Operating indicator flashes if the
appliance has been operated incorrectly
or the electronic fuse has tripped or the
appliance is defective.
The swivel arm must be engaged in every
operating position.

19
Application examples en
Initially try to eliminate the problem which
has occurred with the help of the following
information.
Troubleshooting
Appliance does not start.
Remedial action
■Check the power supply.
■Check the mains plug.
■Check swivel arm. Correct position?
Engaged?
■Screw on blender or bowl as far as
possible.
■Attach the blender cover and screw on
as far as possible.
■Attach drive cover to unused drives.
■The safety lock is active. Switch
appliance to 0/off and then back to the
required setting.
Troubleshooting
Appliance switches off during use. The over-
load protection feature has been activated.
Too much food was processed at one time.
Remedial action
■Switch off the appliance.
■Reduce processing quantity.
Troubleshooting
While the drive was running, the release
button was inadvertently pressed. The swivel
arm moves up. The drive switches off, but
does not stop in the tool change position.
Remedial action
■Set the rotary switch to 0/off.
■Move swivel arm to position 1.
■Switch on appliance (setting 1).
■Switch off appliance again.
Tool stops in tool change
position.
Troubleshooting
Blender does not start working or stops
during use, the drive is “humming”. Blade is
blocked.
Remedial action
■Switch off the appliance and pull out the
mains plug.
■Detach the blender and remove the
obstruction.
■Re-attach the blender.
■Switch on the appliance.
Important information
If the fault cannot be eliminated, please
contact customer service.
Application examples
Observe general recommendations in
table L, table M, table N.
Do not exceed permitted maximum
quantities.
Sponge mixture
Basic recipe
– 2 eggs
– 2-3 tbs. hot water
– 100 g sugar
– 1 packet of vanilla sugar
– 70 g flour
– 70 g cornflour
– Baking powder if required
■Beat the ingredients (except flour and
cornflour) with the whisk for approx.
4-6 minutes at setting 7 until frothy.
■Rotate switch to setting 1 and spoon
in the sifted flour and cornflour within
approx. ½ to 1 minute.
Maximum quantity: 2 x basic recipe
Cake mixture
– 6 eggs
– 500 g sugar
– 1 pinch of salt
– 2 packets of vanilla sugar or peel from
½ lemon
– 500 g butter or margarine
(room temperature)
– 1000 g flour
– 1 packet of baking powder
– 250 ml milk
■Mix the eggs, sugar, salt and vanilla
sugar or lemon peel with the stirrer for
approx. 10 seconds at setting 1.
■Set to setting 5 and process for approx.
120 seconds.
■Add butter and process for approx.
60 seconds at setting 3.

20
en Application examples
■Add flour and baking powder and
process for approx. 2 minutes at
setting 1.
■Set to setting 3 and gradually add the
milk within 2 minutes.
Maximum quantity: 1 x basic recipe
Heavy fruit cake
Basic recipe
– 3 eggs
– 135 g sugar
– 135 g margarine
– 255 g flour
– 10 g baking powder
– 150 g currants
– 150 g mixed dried fruit
■Insert stirring whisk.
■Add all ingredients except the dried fruit.
■Process for 30 seconds at setting 1.
■Then process for 3-5 minutes at
setting 5.
■Select setting 2.
■Add the dried fruit within the next
30-60 seconds.
Maximum quantity: 2 x basic recipe
Short pastry
Basic recipe
– 125 g butter
(room temperature)
– 100-125 g sugar
– 1 egg
– 1 pinch of salt
– A little lemon peel or vanilla sugar
– 250 g flour
– Baking powder if required
■Mix all ingredients with the stirrer for
approx. ½ minute at setting 1, then for
approx. 3-6 minutes at setting 3.
From 250 g flour:
■Knead the ingredients with the kneading
hook for approx. ½ minute at setting 1,
then for approx. 5-6 minutes at setting 3.
Maximum quantity: 2 x basic recipe
Yeast dough
Basic recipe
– 500 g flour
– 1 egg
– 80 g fat (room temperature)
– 80 g sugar
– 200-250 ml lukewarm milk
– 25 g fresh yeast or 1 packet of dried
yeast
– Peel of ½ lemon
– 1 pinch of salt
■Mix all ingredients with the kneading
hook for approx. ½ minute at setting 1,
then for approx. 3-6 minutes at setting 3.
Maximum quantity: 2 x basic recipe
Pasta dough
Basic recipe
– 300 g flour
– 3 eggs
– 1-2 tbs. (10-20 g) cold water as required
■Process all ingredients for approx.
3-5 minutes at setting 3 until a dough
forms.
Maximum quantity: 1.5 x basic recipe
Bread dough
Basic recipe
– 1000 g flour
– 2 packets of dry yeast
– 2 tsp. salt
– 600-650 ml warm water
■Mix all ingredients with the kneading
hook for approx. ½ minute at setting 1,
then for approx. 6-7 minutes at setting 3.
Mayonnaise
– 1 egg
– 1 tsp. mustard
– ¼ l oil
– 1 tbs. lemon juice or vinegar
– 1 pinch of salt
– 1 pinch of sugar
Ingredients must be at room temperature.
Making mayonnaise is only possible with
whole egg.
■Process the ingredients (except the oil) in
the blender for several seconds at setting
3or 4.