Bosch GO User manual

Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 3WU (2017.09) AS /
172
GO Professional
en Original instructions
fr Notice originale
pt Manual original
tw 原始使用說明書
th  
id Petunjuk-Petunjuk untuk
Penggunaan Orisinal
vi
Bản gốc hướng dẫn sửdụng
ar
fa
ςТЎϩХʉ ЌТϾϦφЍʉ ʌμВТЎϺυ
ΖЎϩʉ ˒μВЖЙʉʓ ИͳϞφЁʑ
OBJ_BUCH-3206-003.book Page 1 Wednesday, September 20, 2017 2:06 PM

2|
1 609 92A 3WU | (20.9.17)
Bosch Power Tools
English. . . . . . . . . . . . . . . . .Page 7
Français. . . . . . . . . . . . . . . .Page 24
Português . . . . . . . . . . . . Página 42
中文 . . . . . . . . . . . . . . . . . . . . . .頁59
. . . . . . . . . . . . . . .  73
Bahasa Indonesia . . . . Halaman 90
Tiếng Việt . . . . . . . . . . . . . . Trang 109
. . . . . . . . . . . . . . . . 150
. . . . . . . . . . . . . . 169
. . . . . . . . . . . . . . . . . . . . . . I
OBJ_BUCH-3206-003.book Page 2 Wednesday, September 20, 2017 2:06 PM

| 3
1 609 92A 3WU | (20.9.17)
Bosch Power Tools
1
2
3
4
8
5
6
7
OBJ_BUCH-3206-003.book Page 3 Wednesday, September 20, 2017 2:06 PM

4|
1 609 92A 3WU | (20.9.17)
Bosch Power Tools
A
OBJ_BUCH-3206-003.book Page 4 Wednesday, September 20, 2017 2:06 PM

| 5
1 609 92A 3WU | (20.9.17)
Bosch Power Tools
B
OBJ_BUCH-3206-003.book Page 5 Wednesday, September 20, 2017 2:06 PM

6|
1 609 92A 3WU | (20.9.17)
Bosch Power Tools
C
10
9
OBJ_BUCH-3206-003.book Page 6 Wednesday, September 20, 2017 2:06 PM

English | 7
1 609 92A 3WU | (20.9.17)
Bosch Power Tools
English
Safety Notes
General Power Tool Safety
Warnings
Read all safety
warnings and all in-
structions. Failure to follow the warn-
ings and instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions
for future reference.
The term “power tool” in the warnings
refers to yourmains-operated (corded)
power tool or battery-operated (cord-
less) power tool.
Work area safety
Keep work area clean and well lit.
Cluttered or dark areas invite acci-
dents.
Do not operate power tools in ex-
plosive atmospheres, such as in
thepresenceofflammableliquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
Electrical safety
Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of
electric shock.
WARNING
OBJ_BUCH-3206-003.book Page 7 Wednesday, September 20, 2017 2:06 PM

8| English
1 609 92A 3WU | (20.9.17)
Bosch Power Tools
Avoid body contact with earthed
or grounded surfaces, such as
pipes, radiators, ranges and re-
frigerators. There is an increased
risk of electric shock if your body is
earthed or grounded.
Do not expose power tools to rain
or wet conditions. Water entering a
power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges and moving parts. Damaged
or entangled cords increase the risk
of electric shock.
When operating a power tool out-
doors, use an extension cord suit-
able for outdoor use. Use of a cord
suitable for outdoor use reduces the
risk of electric shock.
Ifoperating a powertool inadamp
location is unavoidable, use a re-
sidual current device (RCD) pro-
tected supply. Use of an RCD re-
duces the risk of electric shock.
Personal safety
Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you are
tired or under the influence of
drugs, alcohol or medication. A
moment of inattention while operat-
ing power tools may result in serious
personal injury.
Use personal protective equip-
ment. Always wear eye protec-
tion. Protective equipment such as
dust mask, non-skid safety shoes,
OBJ_BUCH-3206-003.book Page 8 Wednesday, September 20, 2017 2:06 PM

English | 9
1 609 92A 3WU | (20.9.17)
Bosch Power Tools
hard hat, or hearing protection used
for appropriate conditions will re-
duce personal injuries.
Prevent unintentional starting.
Ensuretheswitchisinthe off-posi-
tion before connecting to power
source and/or battery pack, pick-
ing up or carrying the tool. Carry-
ing power tools with your finger on
the switch or energising power tools
that have the switch on invites acci-
dents.
Remove any adjusting key or
wrench before turning the power
tool on. A wrench or a key left
attached to a rotating part of the
power tool may result in personal
injury.
Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away
from moving parts. Loose clothes,
jewellery or long hair can be caught
in moving parts.
If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of dust collection can reduce
dust-related hazards.
Power tool use and care
Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
OBJ_BUCH-3206-003.book Page 9 Wednesday, September 20, 2017 2:06 PM

10 | English
1 609 92A 3WU | (20.9.17)
Bosch Power Tools
Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous
and must be repaired.
Disconnect the plug from the
power source and/or the battery
pack from the power tool before
making any adjustments, chang-
ing accessories, or storing power
tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
Store idle power tools out of the
reach of children and do not allow
personsunfamiliarwiththepower
tool or these instructions to oper-
ate the power tool. Power tools are
dangerous in the hands of untrained
users.
Maintain power tools. Check for
misalignment or binding of mov-
ing parts, breakage of parts and
any other condition that may
affect the power tool’s operation.
If damaged, have the power tool
repaired before use. Many acci-
dents are caused by poorly main-
tained power tools.
Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking in-
to account the working conditions
andthe work to beperformed.Use
of the power tool for operations dif-
ferent from those intended could
result in a hazardous situation.
OBJ_BUCH-3206-003.book Page 10 Wednesday, September 20, 2017 2:06 PM