Bosch PSR Select User manual

Robert Bosch Power Tools GmbH
70538 Stuttgart
GERMANY
www.bosch-pt.com
1 609 92A 20W (2014.09) I / 211 WEU
WEUWEU
PSR Select
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
OBJ_BUCH-1564-004.book Page 1 Wednesday, January 13, 2016 10:55 AM

Bosch Power Tools 1 609 92A 20W | (13.1.16)
| 3
13
5
7
2
1
3
4
6
PSR Select
8
9
10
11
12
OBJ_BUCH-1564-004.book Page 3 Wednesday, January 13, 2016 10:56 AM

1 609 92A 20W | (13.1.16) Bosch Power Tools
4|
A
15
9
14
OBJ_BUCH-1564-004.book Page 4 Wednesday, January 13, 2016 10:56 AM

Bosch Power Tools 1 609 92A 20W | (13.1.16)
| 5
C
B
1
3
7
2
7
11
OBJ_BUCH-1564-004.book Page 5 Wednesday, January 13, 2016 10:56 AM

1 609 92A 20W | (13.1.16) Bosch Power Tools
6|
E
D
7
3
8
8
11
OBJ_BUCH-1564-004.book Page 6 Wednesday, January 13, 2016 10:56 AM

1 609 92A 20W | (18.1.16) Bosch Power Tools
24 | English
English
Safety Notes
General Power Tool Safety Warnings
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (cord-
ed) power tool or battery-operated (cordless) power tool.
Work area safety
 Keep work area clean and well lit. Cluttered or dark areasinvite accidents.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
Keep children and bystandersaway while operating a power tool. Dis-
tractions can cause you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce risk of electric
shock.
Avoid body contact with earthed or grounded surfaces, such as
pipes,radiators,ranges and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or un-
plugging the power tool. Keep cord away from heat, oil, sharp edges
and moving parts. Damaged or entangled cords increase the risk of elec-
tric shock.
WARNING
OBJ_BUCH-1564-004.book Page 24 Monday, January 18, 2016 11:10 AM

English | 25
Bosch Power Tools 1 609 92A 20W | (18.1.16)
When operating a power tool outdoors, use an extension cord suita-
ble for outdoor use. Use of a cord suitable for outdoor use reduces the
risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a re-
sidual current device (RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common sensewhen op-
eratingapowertool.Donotuseapower tool while you are tired or un-
der the influence of drugs, alcohol or medication. A moment of inatten-
tion while operating power tools may result in serious personal injury.
Use personal protective equipment. Alwayswear eyeprotection.Pro-
tective equipment such as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce personal
injuries.
 Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or
carryingthetool.
Carrying power tools with your finger on the switchor en-
ergising power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool
on.A wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes, jew-
ellery or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and col-
lection facilities, ensure these are connected and properly used. Use
of dust collection can reduce dust-related hazards.
Power tool use and care
Do not force the power tool. Usethe correct power tool for your appli-
cation. The correct power tool will do the job better and safer at the rate
for which it was designed.
OBJ_BUCH-1564-004.book Page 25 Monday, January 18, 2016 11:10 AM

1 609 92A 20W | (18.1.16) Bosch Power Tools
26 | English
Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and
must be repaired.
Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing acces-
sories, or storing power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to oper-
ate the power tool. Power tools are dangerous in the hands of untrained
users.
Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power tool repaired be-
fore use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and
thework to be performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Battery tool use and care
Recharge only with the charger specified by the manufacturer. A
charger that is suitable for one type of battery pack may create a risk of
fire when used with another battery pack.
Use power tools only with specifically designated battery packs. Use
of any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal ob-
jects, like paper clips, coins, keys, nails, screws or other small metal
objects, that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If liq-
uid contacts eyes, additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
OBJ_BUCH-1564-004.book Page 26 Monday, January 18, 2016 11:10 AM

English | 27
Bosch Power Tools 1 609 92A 20W | (18.1.16)
Service
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the pow-
er tool is maintained.
Safety Warnings for Screwdrivers
Hold power tool by insulated gripping surfaces, when performing an
operation where the fastener may contact hidden wiring. Fasteners
contacting a “live” wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
Hold the machine with a firm grip. High reaction torque can briefly
occur while driving in and loosening screws.
Securethe workpiece. A workpiece clamped withclampingdevicesorin
a vice is held more secure than by hand.
Always wait until the machine has come to a complete stop before
placing it down. The tool insert can jam and lead to loss of control over
the power tool.
Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direc-
tionswitchtothecentreposition. Unintentional actuation oftheOn/Off
switch can lead to injuries.
Protect the power tool against heat, e. g., against continuous
intense sunlight, fire, water, and moisture. Danger of explo-
sion.
In case of damage and improper use of the battery, vapours may be
emitted. Ventilate the area and seek medical help in case of com-
plaints. The vapours can irritate the respiratory system.
Safety Warnings for Battery Chargers
This charger is not intended for use by chil-
dren and persons with physical, sensory or
mental limitations or a lack of experience or
knowledge. This charger canbe used by chil-
OBJ_BUCH-1564-004.book Page 27 Monday, January 18, 2016 11:10 AM

1 609 92A 20W | (18.1.16) Bosch Power Tools
28 | English
dren aged 8 and by persons who have physi-
cal,sensoryormentallimitationsoralackof
experience or knowledge if a person respon-
sible for their safety supervises them or has
instructed them in the safe operation of the
chargerandtheyunderstandtheassociated
dangers. Otherwise, there is a danger of oper-
ating errors and injuries.
Supervise children. This will ensure that chil-
dren do not play with the charger.
Cleaning and user maintenance of the bat-
tery charger shall not be made by children
without supervision.
Keep the battery charger away from rain or moisture. Penetra-
tionofwaterinthebatterychargerincreasestheriskofanelectric
shock.
Only charge Bosch lithium-ion batteries or lithium-ion batteries in-
stalled in Bosch products. The battery voltage must match the bat-
tery charging voltage of the charger. Otherwise there is danger of fire
and explosion.
Keep the battery charger clean. Contamination can lead to danger of an
electric shock.
Before each use, check the battery charger, cable and plug. If dam-
age is detected, do not use the battery charger. Never open the bat-
tery charger yourself. Have repairs performed only by a qualified
technician and onlyusingoriginal spareparts. Damaged batterycharg-
ers, cables and plugs increase the risk of an electric shock.
OBJ_BUCH-1564-004.book Page 28 Monday, January 18, 2016 11:10 AM

English | 29
Bosch Power Tools 1 609 92A 20W | (18.1.16)
Products sold in GB only:Yourproduct isfitted withaBS 1363/A approved
electric plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be cut off and an
appropriate plug fitted in its place by an authorised customer service agent.
The replacement plug should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible shock hazard and
should never be inserted into a mains socket elsewhere.
Product Description and Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for driving in and loosening screws.
Thelightofthispower tool is intended to illuminate the powertool’sdirect ar-
ea of working operation and is not suitable for household room illumination.
Product Features
The numbering of the product features refers to the illustration of the
machine on the graphics page.
1Screwdriver bit*
2Tool holder
3Viewing window
4Indicator for right rotation
5Battery charge-control indicator
6Indicator for left rotation
7Sliding switch for bit changing
8Rotational direction switch
9Socket for charge connector
10 On/Off switch
11 Bit magazine
OBJ_BUCH-1564-004.book Page 29 Monday, January 18, 2016 11:10 AM

1 609 92A 20W | (18.1.16) Bosch Power Tools
30 | English
12 “PowerLight”
13 Handle (insulated gripping surface)
14 Charge connector
15 Battery charger
*Accessories shown or described are not part of the standard delivery scope of
the product. A complete overview of accessories can be found in our accessories
program.
Technical Data
Cordless Screwdriver PSR Select
Article number 3 603 J77 0..
Rated voltage V= 3.6
No-load speed min-1 210
Max. torque for hard/soft screwdriving
application according to ISO 5393 Nm 4.5/3.5
Max. screw dia. mm 5
Weight according to EPTA-Procedure
01:2014 kg 0.50
Battery Li-Ion
Capacity Ah 1.5
Number of battery cells 1
Battery Charger
Article number 2 609 003 263 (EU)
2 609 003 265 (UK)
Charging time h4
Protection class /II
OBJ_BUCH-1564-004.book Page 30 Monday, January 18, 2016 11:10 AM

English | 31
Bosch Power Tools 1 609 92A 20W | (18.1.16)
Noise/Vibration Information
Sound emission values determined according to EN 60745-2-2.
Typically the A-weighted sound pressure level of the product is less than
70 dB(A). Uncertainty K =3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values ah(triax vector sum) and uncertainty K determined ac-
cording to EN 60745:
Screwdriving without impact: ah<2.5m/s2, K=1.5 m/s2.
The vibration level given in this information sheet has been measured in ac-
cordance with a standardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a preliminary assessment
of exposure.
Thedeclaredvibrationemissionlevelrepresentsthemainapplicationsofthe
tool. However if the tool is used for different applications, with different ac-
cessories or insertion tools or is poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into ac-
count the times when thetool is switched off or when it is running butnot ac-
tuallydoingthe job. This maysignificantlyreducetheexposure level over the
total working period.
Identify additional safety measures to protect the operator from the effects
of vibration such as: maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that the product described under
“Technical data” is in conformity with all relevant provisions of the directives
2009/125/EC (Regulation 1194/2012), 2011/65/EU, 2014/35/EU,
2014/30/EU, 2006/42/EC. including their amendments and complies with
the following standards:
EN 50581, EN 60745-1, EN 60745-2-2 (battery powered product),
EN 60335-1, EN 60335-2-29 (battery charger).
OBJ_BUCH-1564-004.book Page 31 Monday, January 18, 2016 11:10 AM

1 609 92A 20W | (18.1.16) Bosch Power Tools
32 | English
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ETM9,
70538 Stuttgart, GERMANY
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
Assembly
Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direc-
tionswitchtothecentreposition. Unintentional actuation ofthe On/Off
switch can lead to injuries.
Battery Charging (see figure A)
Do not use other battery chargers. The supplied battery charger is de-
signed for the Lithium-Ion battery in your machine.
Observe the mains voltage! The voltage of the power supply must corre-
spond with the data given on the nameplate of the battery charger. Bat-
tery chargers marked with 230 V can also be operated with 220 V.
Note:The battery supplied is partially charged. To ensure full capacity of the
battery, completely charge the battery in the battery charger before using
your power tool for the first time.
The lithium-ion battery can be charged at any time without reducing its ser-
vice life. Interrupting the charging procedure does not damage the battery.
The lithium-ion battery is protected against deep discharging by the “Elec-
tronic Cell Protection (ECP)”. When the battery is empty, the machine is
switched off by means of a protective circuit: The inserted tool no longer ro-
tates.
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
OBJ_BUCH-1564-004.book Page 32 Monday, January 18, 2016 11:10 AM

English | 33
Bosch Power Tools 1 609 92A 20W | (18.1.16)
Do not continue to press the On/Off switch after the machine has
been automatically switched off. The battery can be damaged.
The battery is equipped with a NTC temperature control which allows charg-
ing only within a temperature range of between 0 °C and 45 °C. A long bat-
tery service life is achieved in this manner.
When the battery charge-control indicator 5lights up red while the On/Off
switch 10 is depressed half way, then the battery has less than 30% of its
capacity and should be charged.
The charging procedure begins as soon as the mains plug of the battery
charger is plugged into a socket outlet and the charge connector 14 is
plugged into the socket 9on the bottom of the handle.
Due to the intelligent charging method,the charging condition of the battery
is automatically detected and the battery is charged withthe optimum charg-
ing current, depending on battery temperature and voltage.
The battery charge-control indicator 5indicates the charging progress. The
indicator flashes green during the charging procedure. When the battery
charge-control indicator 5no longer lights up, the battery is completely
charged. When the battery charge-control indicator 5lights up red, the bat-
tery temperature is too high.
During the charging procedure, the handle of the machine warms up. This is
normal.
Disconnect the battery charger from the mains supply when not using it for
longer periods.
The power tool cannot be used during the charge procedure; it is not defec-
tive when inoperative during the charging procedure.
Observe the notes for disposal.
Inserting Screwdriver Bits into the Bit Magazine
(see figure B–C)
OBJ_BUCH-1564-004.book Page 33 Monday, January 18, 2016 11:10 AM

1 609 92A 20W | (18.1.16) Bosch Power Tools
34 | English
When changing the application tool, wear safety goggles. Do not
stare directly into the tool holder. When changing the tool insert, it can
be thrown out toward the front.
Only insert one screwdriver bit per chamber into the bit magazine.
Use only short standard screwdriver bits. Longer screwdriver bits can-
not be loaded into the bit magazine.
– Turn the bit magazine 11 until an empty chamber can be seen in viewing
window 3.
– Push the sliding switch 7toward the front.
– Insert the screwdriver bit 1directly into the tool holder 2.
– Push the sliding switch 7to the rear to load the screwdriver bit 1into bit
magazine 11.
– As soon as you push the sliding switch 7to the rear or actuate the On/Off
switch 10 when in the rear position, the bit magazine 11is illuminated for
approx. 20 seconds.
Changing the Tool (see figure D)
When changing the application tool, wear safety goggles. Do not
stare directly into the tool holder. When changing the tool insert, it can
be thrown out toward the front.
– Turn the bit magazine 11 until the desired screwdriver bit 1can be seen
in viewing window 3.
– Push the sliding switch 7toward the front.
Operation
Starting Operation
Reversing the rotational direction (see figure E)
The rotational direction switch 8 is used to reverse the rotational direction of
the machine. However, this is not possible with the On/Off switch
10 actuated.
Right rotation: For driving in screws, push the rotational direction switch 8
left to the stop.
The indicator for right rotation 4lights up when the On/Off switch
10 is actuated and the motor is running.
OBJ_BUCH-1564-004.book Page 34 Monday, January 18, 2016 11:10 AM

English | 35
Bosch Power Tools 1 609 92A 20W | (18.1.16)
Left Rotation: For loosening or unscrewing screws, push the rotational di-
rection switch 8right to the stop.
The indicator for left rotation 6lights up when the On/Off switch 10
is actuated and the motor is running.
Switching On and Off
To save energy, only switch the power tool on when using it.
Note: The power tool can only be switched on when the sliding switch 7has
been pushed to the front position.
To start the machine, press the On/Off switch 10 and keep it pressed.
The power light 12 lights up when the On/Off switch 10 is slightly or com-
pletely pressed, and allows the work area to be illuminated when lighting
conditions are insufficient.
To switch off the machine, release the On/Off switch 10.
The spindle is locked when the On/Off switch 10 is not pressed.
When the spindle is locked, do not press the On/Off switch 10 for
more than 15 seconds. Otherwise the power tool can be damaged.
Battery Charge-control Indication
The battery charge-control indicator 5indicates the charge condition of the
battery when the power tool is switched on.
Temperature Dependent Overload Protection
When using as intended for, the power tool cannot be subject to overload.
When the load is too high or the allowablebatterytemperatureof65 °C is ex-
ceeded, theelectronic control switchesoff the power tool until the tempera-
ture is in the optimum temperature range again.
LED Capacity
Continuous lighting, green ≥ 30%
Continuous lighting, red < 30%
OBJ_BUCH-1564-004.book Page 35 Monday, January 18, 2016 11:10 AM

1 609 92A 20W | (18.1.16) Bosch Power Tools
36 | English
Working Advice
Apply the power tool to the screw only when it is switched off. Rotat-
ing tool inserts can slip off.
Maintenance and Service
Maintenance and Cleaning
Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direc-
tionswitchtothecentreposition. Unintentional actuation ofthe On/Off
switch can lead to injuries.
For safe and proper working, always keep the machine and ventila-
tion slots clean.
When the battery is no longer operative, please refer to an authorised after-
sales service agent for Bosch power tools.
If the replacement of the supply cord is necessary, this has to be done by
Bosch or an authorized Bosch service agent in order to avoid a safety hazard.
Ifthemachineshouldfail despite the caretakenin manufacturing and testing
procedures, repair should be carried out by an after-sales service centre for
Bosch power tools.
In all correspondence and spare parts order, please always include the
10-digit article number given on the type plate of the machine.
After-sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance
and repair of your product as well as spare parts. Exploded views and infor-
mation on spare parts can also be found under:
www.bosch-pt.com
Bosch’sapplicationservice teamwillgladlyanswerquestionsconcerningour
products and their accessories.
OBJ_BUCH-1564-004.book Page 36 Monday, January 18, 2016 11:10 AM

English | 37
Bosch Power Tools 1 609 92A 20W | (18.1.16)
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection
of a product in need of servicing or repair.
Tel. Service: [phone]
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: [phone]
Fax: [phone]
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: [phone]
Fax: [phone]
Inside New Zealand:
Phone: [phone]
Fax: [phone]
Outside AU and NZ:
Phone: [phone]
www.bosch.com.au
OBJ_BUCH-1564-004.book Page 37 Monday, January 18, 2016 11:10 AM

1 609 92A 20W | (18.1.16) Bosch Power Tools
38 | English
Republic of South Africa
Customer service
Hotline: [phone]
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Bosch Headquarters
Midrand, Gauteng
Tel.: [phone]
Fax: [phone]
E-Mail: rbsa-hq.pt[email protected]
Transport
The contained lithium-ion batteries are subject to the Dangerous Goods Leg-
islation requirements. The user can transport the batteries by road without
further requirements.
When being transported by third parties (e.g.: air transport or forwarding
agency),special requirements onpackagingandlabelling must beobserved.
For preparation of the item being shipped, consulting an expert for hazard-
ous materialis required.
OBJ_BUCH-1564-004.book Page 38 Monday, January 18, 2016 11:10 AM