Bose OE2i User manual

BosE® OE2i
AUDIO
HEADPHONES
348790-0010

English
Please read and keep this Quick
Start Guide,
the
Important Safety
Instructions and Warranty.
For
additional
information
about
your
headphones
,
refer
to
the
Owner's
Guide:
http://globai.Bose.com
U.S
.
only
:
http
:
//Owners.Bose.com
Important Safety Instructions
CAUTIONS:
•
Long-term
exposure
to
loud
music
may
cause
hearing
damage
.
Please
avoid
extreme
volume
when
using
headphones,
especially
for
extended
periods.
•
Do
not
use
headphones
when
operating
a
motor
vehicle
or
anywhere
the
inability
to
hear
outside
sounds
may
present
a
danger
to
you
or
others.
Check
and
follow
local
laws
regarding
headphone
use
.
•
Sounds
that
you
rely
on
as
reminders
or
warnings
may
have
an
unfamiliar
character
when
using
headphones
.
Be
aware
of
how
these
sounds
may
vary
in
character
so
you
can
recognize
them
as
needed
.
•
Do
not
drop
,
sit
on
,
or
allow
the
headphones
to
be
immersed
in
water
.
•
DO
NOT
use
mobile
phone
adapters
to
connect
headphones
to
ai
r
plane
seat
jacks
,
as
this
could
result
in
personal
injury
such
as
burns
or
property
damage
due
to
overheating.
Remove
and
disconnect
immediately
if
you
experience
warming
sensation
or
loss
of
audio
.
This
product
conforms
to
all
applicable
EMC
Directive
requirements.
The
complete
Declaration
of
Conformity
can
be
found
at
www
.
Bose
.
com/compliance
.
Storing your headphones
Note: Do
not
try
to
exceed
the
limits
of
the
pivots
or
over-rotate
the
earcups.

Wearing your headphones
Before putting the headphones on,
identify the left (L) and right (R) earcups.
Adjust the headband as needed.
Using the headphones
with your Apple
device
The
Bose OE2i headphones come with a
small in-line
remote with an integrated
microphone for convenient control of
select Apple products.
Note: Full controls may
not be available
for some Apple products.
Basic functions
Increase volume
Press and release the +
button.
Decrease volume Press and release the-
button.
Call-related functions
Answer a call When you receive an
incoming call, press and
release
the Answer/End
button to answer.
End a call Press and release the
Answer/End button.
Decline an
Press and hold the Answer/
incoming call
End button for about two
seconds, then release.
Switch
to an While on a call, press and
incoming
or on- release the Answer/End
hold call and
put
button once. Press and
the current call release again
to switch back
on
hold to the first call.
Switch
to an While on a call, press and
incoming
or on- hold
the Answer/End button
hold call and end
for about two seconds, then
the current call release.
Use Voice Control
Press and hold the Answer/
End button. See iPhone User
Guide
for compatibility and
usage
information about
this feature.
Media playback functions
Play or pause a Press and release the
song or video Answer/End button.
Skip to the next Press and release the
song or chapter Answer/End button twice
quickly.
Fast-forward
Press and release the
Answer/End button twice
quickly and hold the second
press.
Go to the Press and release the
previous song or Answer/End button three
chapter times quickly.
Rewind
Press and release the
Answer/End button three
times quickly and hold the
third press.

Re-attaching earcup cushions
If an earcup cushion becomes detached:
1. Properly align the replacement
cushion
with the earcup.
2. Tuck an edge of the ear cushion skirt
into the slot behind the ear cushion
flange.
Be careful not to fold the
skirt over.
3. Work the remainder of the skirt
into the slot all the way around the
earcup.
4. Grasp the ear cushion and adjust its
position to remove any folds in the
skirt and wrinkles in the cushion.

Troubleshooting ·
Poor Sound Quality or Missing Audio
Channel(s)
•
Make sure the headphone cable
is securely plugged into both the
headset and headphone jack of the
Apple device
•
Adjust the bass and treble settings in
the audio device
• Try
another audio device
Microphone not working
• Assure you are using a compatible
Apple device (see list of compatible
devices below)
• Make sure the headphones are
securely
plugged into the headphone
jack of the Apple device
•
Make sure the microphone opening
on the back of the Answer/End
button is not blocked
• Try
another phone call
• Try
another compatible Apple device
Apple product is not responding to
(remote) button commands
• Assure you are using a compatible
Apple device (see list of compatible
devices below)
• Make sure the headphones are
securely
plugged into the headphone
jack of the Apple device
• For multi-press functions: vary speed
of button presses
• Try another compatible Apple device