BOSER Technology Celeron 370 User manual

HS-6039
Socket 370 Celeron
™
/FC-PGA
• CRT/Panel•Dual Display•Dual LAN•133MHz FSB•SCSI•PC/104•
• WDT•DOC•USB•IrDA•Hardware Monitor•
• PICMG Industrial Single Board Computer•
HS-6039LV
Socket 370 Celeron
™
/FC-PGA
•CRT/Panel•Dual Display•LAN•133MHz FSB•SCSI•PC/104•
• WDT•DOC•USB•IrDA•Hardware Monitor•
PICMG Industrial Single Board Computer•

Copyrights
This manual is copyrighted and all rights are reserved. It is not allow any non
authorization in copied, photocopied, translated or reproduced to any electronic or
machine readable form in whole or in part without prior written consent from the
manufacturer.
In general, the manufacturer will not be liable for any direct, indirect, special,
incidental or consequential damages arising from the use of inability to use the
product or documentation, even if advised of the possibility of such damages.
The manufacturer keeps the rights in the subject to change the contents of this
manual without prior notices in order to improve the function design, performance,
quality and reliability. The author assumes no responsibility for any errors or
omissions, which may appear in this manual, nor does it make a commitment to
update the information contained herein.
Trademarks
BOSER is a registered trademark of BOSER Technology Co., Ltd.
ISB is a registered trademark of BOSER Technology Co., Ltd.
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
All other trademarks, products and or product's name mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or registered
trademarks of their respective companies or owners.
© Copyright 2001
All Rights Reserved.
User Manual edition 1.2, March 06 2003

Contents •i
Contents
HS-6039 ......................................................................................................1
HS-6039LV....................................................................................................
GENERAL INFORMATION .............................................................................3
1.1 MAJOR FEATURES .....................................................................................4
1.2 SPECIFICATIONS.........................................................................................5
1.3 DELIVERY PACKAGE...................................................................................6
HARDWARE INSTALLATION ........................................................................8
2.1 CAUTION OF STATIC ELECTRICITY.............................................................8
2.2 CAUTION ON UNPACKING AND BEFORE INSTALLATION .............................9
2.3 HS-6039’S LAYOUT.................................................................................10
2.4 QUICK LISTING OF JUMPERS ...................................................................11
2.5 QUICK LISTING OF CONNECTORS ............................................................12
2.6 JUMPER SETTING DESCRIPTION..............................................................13
2.7 SETTING THE CPU HOST CLOCK FREQUENCY.......................................14
2.8 SETTING THE RTC CONFIGURATION.......................................................14
2.9 SYSTEM MEMORY DRAM........................................................................14
2.10 WATCH-DOG TIMER...............................................................................15
2.11 SCSI CONTROLLER...............................................................................17
2.12 VGA CONTROLLER................................................................................18
2.13 DISKONCHIPADDRESS SETTING.......................................................22
2.14 CPU TEMPERATURE ALARM .................................................................22
CONNECTION .................................................................................................23
3.1 POWER AND FAN CONNECTORS ............................................................23
3.2 IDE'S LED, KEYLOCK AND RESET BUTTON............................................24
3.3 EXTERNAL SPEAKER................................................................................25
3.4 PCI E-IDE DRIVE CONNECTOR ..............................................................26
3.5 PARALLEL PORT CONNECTOR.................................................................28
3.6 THE FLOPPY DISK DRIVE CONNECTOR ...................................................29
3.7 SERIAL PORTS CONNECTORS .................................................................30
3.8 KEYBOARD CONNECTORS .......................................................................30
3.9 PS/2 MOUSE 6PIN MINI DIN CONNECTOR ..............................................31
3.10 IR CONNECTOR .....................................................................................31
3.11 USB PORTS CONNECTOR.....................................................................32
3.12 LAN INTERFACE CONNECTOR ..............................................................32

ii •Contents
3.13 ULTRAⅡSCSI INTERFACE CONNECTOR ..............................................34
3.14 PC/104 BUS CONNECTION....................................................................35
AWARD BIOS SETUP....................................................................................37
4.1 MAIN MENU ..............................................................................................38
4.2 STANDARD CMOS SETUP.......................................................................39
4.3 BIOS FEATURES SETUP..........................................................................40
4.4 CHIPSET FEATURES SETUP .....................................................................41
4.5 INTEGRATED PERIPHERALS .....................................................................42
4.6 POWER MANAGEMENT SETUP.................................................................44
4.7 PNP/PCI CONFIGURATION SETUP ..........................................................45
SOFTWARE UTILITIES .................................................................................46
5.1 VGA DRIVER INSTALL FOR WIN95&98....................................................47
5.2 VGA DRIVER INSTALL FOR WIN NT4.0 ..................................................51
5.3 NETWORK DRIVER INSTALL FOR WIN 95&98 .........................................54
5.4 NETWORK DRIVER INSTALL FOR WIN NT4.0..........................................57
5.5 ULTRA II SCSI INSTALL FOR WIN95&98 .................................................59
5.6 ULTRA II SCSI INSTALL FOR WIN NT4.0.................................................62

3
Chapter-1
General Information
The HS-6039 is a 100MHz system clock provides up to 133MHz PICMG Bus
Socket 370 for Intel®Celeron™/CoppermineTM Industrial Single Board CPU
Card with features combine together to make it an ideal all-in-one industrial
single board computer, enhanced I/O effects with LAN and CRT/Panel
interface and Ultra II SCSI interface.
With on board DMA33 of Mode 3/4 to IDE disk drive interface architecture,
the HS-6039 supports with maximum 33MB/sec in data transfer rating to two
IDE disk drive connections.
On board 4MB Intel® 69030 CRT/Panel display controller provides up to 1280
x 1024 64K colors resolution. And it also provides one internal 50pin
connector for carious type of the Panel connection.
The advanced PICMG Bus add on connection of HS-6039 allows user could
easily obtain both ISA’s 16bit and PCI’s 32bit full set signals from a full-size
PICMG slot for suitable plug into a any size system with 8/16/32bit ISA and
PCI slots operating. The HS-6039 provides with four DIMM sockets provides
up to 1GB of main system memory.
A single Flash chip holds the system BIOS, and you can easy update the
Flash BIOS by the Utility Update. Advanced USB and IR ports also provide
for faster and easily in data transmission. You can also use the DOS version
of the DiskOnChip™socket by issuing commands from the DOS prompt
without the necessity of other software supports up to 144MB.
The HS-6039 features include Dual Intel® 82559 100 Based LAN design on
board. With two RJ-45 and two 10pin header connector provides an easily for
user’s LAN application.
If a non-expect program cause halts, the on board Watch-Dog Timer will
automatically Reset the COU or generate an interrupt. The Watch-Dog is
designed with hardware only and doesn’t need any arithmetical functions of
a real-time clock chip. This ensures the reliability in an unmanned or
standalone system.

4
1.1 Major Features
 Socket 370 for Intel®CeleronTM/CoppermineTM 266~933MHz CPU
 Four DIMM sockets provides up to 1GB (Only for PCB v1.3)
 Fast PCI DMA33 controller supports four IDE disk drives
 100MHz system clock provides up to 133MHz
 Two RS-232 serial ports include 16C550 UART with 16byte FIFO
 One enhanced bi-directional parallel port supports SPP/ECP/EPP
 On board PS/2 Keyboard and PS/2 Mouse connector
 On board Winbond W83977 super I/O chipset
 On board 69030 CRT/Panel Dual display controller
 On board Dual Intel® 82559 100 Based LAN
 On board Symbios 53C895 Ultra II SCSI
 On board PCI Bridge
 DiskOnChip memory size up to 144MB
 PC/104 Bus connector
 ATX Power Function support
 Hardware Monitor support

5
1.2 Specifications
 CPU：Socket 370 for Intel® CeleronTM/CoppermineTM
266~933MHz CPU
 Bus Interface：PICMG Bus
 Bus Clock Rate：100MHz system clock provides up to 133MHz
 Memory：Four DIMM sockets provides up to 1GB (Only for PCB
v1.3)
 Chipset：Intel®82443BX
 I/O Chipset：Winbond W83977
 PCI Bridge：Intel®21152 or equivalent device
 VGA：69030 with 4MB memory support CRT/Panel display
controller
 IDE：Four IDE disk drives support DMA33 transfer rate up to
33MB/sec
 Floppy：Support up to two floppy disk drives
 Parallel Port：Support SPP/ECP/EPP
 Dual LAN：Dual Intel®82559 100 Based LAN
 SCSI：Symbios 53C895 Ultra II SCSI
 Serial Port：Two RS-232 serial ports include 16C550 UART with
16byte FIFO
 PC/104：PC/104 connector for 16bit ISA Bus
 IR：One IrDA TX/RX header
 USB：Support two USB ports
 Keyboard：PS/2 6pin Mini Din or 5pin connector

6
 Mouse：PS/2 6pin Mini Din or 4pin header
 DiskOnChip：Socket for DiskOnChip and memory size up to
144MB
 BIOS：Award Y2K PnP Flash BIOS
 Watch-Dog Timer：Set 1, 2, 10, 20, 110, 220 seconds activity
trigger with Reset or NMI
 CMOS：DS12C887 or equivalent device
 DMA Channels：7
 Interrupt Levels：15
 Maximum Power Consumption：+5V@8A(933MHz)、
+12V@120mA、-12V@50mA
 Operating Temperature：0~60℃
 Hardware Monitor：W83783S
 Board Size：13.26”(L)x4.8”(W)
1.3 Delivery Package

7
The delivery package of HS-6039 includes all following items:
 One HS-6039 Industrial Single Board
 One Printer Ports Bracket Flat Cable
 One com port Bracket Flat Cable
 Two IDE port Flat Cable
 One FDD port Flat Cable
 Utility CD
 User’s Manual
Please contact with your dealer if any of these items are missing or
damaged when purchasing. And please keep all parts of the
delivery package with packing materials in case of you want to ship
or store the product in feature.

8
Chapter-2
Hardware Installation
This chapter provides the information on how to install the hardware
of HS-6039. At first, please follow up sections 1.3, 2.1 and 2.2 in
check the delivery package and carefully unpacking. Following
after, the jumpers setting of switch, Watch-Dog Timer and the
DiskOnChipaddress selection etc.
2.1 Caution of Static Electricity
The HS-6039 has been well package with an anti-static bag in
protect its sensitive computer components and circuitry from the
damage of static electric discharge.
Note: DO NOT TOUCH THE BOARD OR ANY OTHER
SENSITIVE COMPONENTS WITHOUT ALL NECESSARY
ANTI-STATIC PROTECTION.
You should follow the steps as following to protect the board in
against the static electric discharge whenever you handle the
board:
1. Please use a grounding wrist strap on whoever needs to handle
the HS-6039. Well clip the ALLIGATOR clip of the strap to the end
of the shielded wire lead from a grounded object. Please put on
and connect the strap before handle the HS-6039 for harmlessly
discharge any static electricity through the strap.
2. Please use anti-static pad for put any components or parts or
tools on the pad whenever you work on them outside the
computer. You may also in use the anti-static bag instead the
pad. Please ask from your local supplier in help up your
necessary parts on anti-static requirement.

9
2.2 Caution on Unpacking and Before Installation
First of all, please follow with all necessary steps of section 2.1 in
protection the HS-6039 from electricity discharge. With refer to
section 1.3, please check the delivery package again with following
steps:
1.Unpacking the HS-6039, keep well storage of all packing material,
manual and diskette etc. if has.
2.Is there any components lose or drop from the board? DO NOT
INSTALL IF HAPPENED.
3.Is there any visual damaged of the board? DO NOT INSTALL IF
HAPPENED.
4.Well check from your optional parts (i.e. CPU, SRAM, DRAM,
ROM-Disk etc.) for completed setting all necessary jumpers
setting to jumper pin-set and CMOS setup correctly. Please also
reference to all information of jumpers setting in this manual.
5.Well check from your external devices (i.e. Add-On-Card, Driver
Type etc.) for completed add-in or connection and CMOS setup
correctly. Please also reference to all information of connector
connection in this manual.
6.Please keep all necessary manual and diskette in a good
condition for your necessary re-installation if you change your
Operating System or whatever needs.

10
2.3 HS-6039’s Layout

11
2.4 Quick Listing of Jumpers
JP1 RESET PIN....................................................................... P.25
JP3 BUS CLOCK RATE SELECT ............................................... P.14
JP4 BUS CLOCK RATE SELECT ............................................... P.14
JP5 VGA ENABLE / DISABLE SELECT...................................... P.18
JP6 SCSI ENABLE / DISABLE SELECT ..................................... P.17
JP7 LCD VOLTAGE SELECT ................................................... P.18
JP8 CTA ENABLE / DISABLE SELECT ..................................... P.22
JP9 CLEAR CMOS................................................................. P.14
JP11(1-4) DISKONCHIPADDRESS ................................................ P.22
JP11(5-10)TIME OF WATCH-DOG SELECT ........................................ P.15
JP12 WATCH-DOG TIMER ACTIVE TYPE SETTING....................... P.15
JP13 LAN1 ENABLE / DISABLE SELECT ................................... P.32
JP14 LAN2 ENABLE / DISABLE SELECT .................................... P.32

12
2.5 Quick Listing of Connectors
S1 ATX POWER SWITCH ...................................................... P.23
CN1 SPEAKER ........................................................................ P.25
CN2 HDD LED ....................................................................... P.25
CN3 FAN ............................................................................... P.23
CN4 KEYLOCK ......................................................................... P.25
CN5 5PIN KEYBOARD CONNECTOR ........................................... P.30
CN6 IR CONNECTOR................................................................ P.31
CN8 PRIMARY IDE CONNECTOR............................................... P.26
CN9 SECONDARY IDE CONNECTOR.......................................... P.26
CN10 68PIN SCSI CONNECTOR................................................. P.34
CN11 ATX POWER CONNECTOR ............................................... P.23
CN12 5PIN ATX POWER CONNECTOR ........................................ P.23
CN13 FDD CONNECTOR ........................................................... P.29
CN14 LCD PANEL CONNECTOR................................................. P.18
CN15 PC/104 64PIN CONNECTOR ............................................. P.35
CN16 PC/104 40PIN CONNECTOR ............................................ P.35
CN17 USB ............................................................................... P.32
CN18 PARALLEL CONNECTOR.................................................... P.28
CN19 COM2 (2X5 HEADER) .................................................... P.30
CN20 LAN2 INTERNAL CONNECTOR (2X5 HEADER).................... P.32
CN21 INTERNAL CRT CONNECTOR ............................................ P.18
CN22 COM1 (2X5 HEADER) ..................................................... P.30
CN23 LAN1 INTERNAL CONNECTOR (2X5 HEADER).................... P.32
CN24 4PIN MOUSE CONNECTOR
CN25 PS/2 6PIN MINI DIN MOUSE CONNECTOR ......................... P.31
CN26 CRT DB15 CONNECTOR ................................................. P.18
CN27 PS/2 6PIN MINI DIN KEYBOARD CONNECTOR .................... P.30
CN28 LAN1 AND LAN2 RJ-45 CONNECTOR .............................. P.32

13
2.6 Jumper Setting Description
A jumper pin-set is ON as a shorted circuit with a plastic cap
inserted over two pins. A jumper pin-set is OFF as a open circuit
with a plastic cap inserted over one or no pin(s) between pins. The
below figure 2.2 shows the examples of different jumper pin-set
setting as ON or OFF in this manual.
Figure 2.2
All jumper pin-set already has its default setting with the plastic cap
inserted as ON, or without the plastic cap inserted as OFF. The
default setting may reference in this manual with a " * " symbol in
front of the selected item.

14
2.7 Setting the CPU Host Clock Frequency
The HS-6039 provides all necessary by jumper setting in using
Bus-Clock frequency as the system bus clocking with JP3 setting as
following:
 Setting the CPU Host Clock of JP3 :
Host Clock JP3
66MHz 1-2
100MHz 1-2
*133MHz 2-3
 Setting the CPU Host Clock of JP4 :
Host Clock 1-2 3-4
*Auto ON ON
BIOS Setting OFF OFF
2.8 Setting the RTC Configuration
The HS-6039 provides a setting for the selection of the RTC Clear
Jumper by JP9 setting as following:
 CMOS Setting of JP9(Only for DS12B887)：
CMOS Clear Jumper JP9
Normal * OFF
Clear CMOS ON
2.9 System Memory DRAM
The HS-6039 provides a wide SDRAM memory by four DIMM
sockets request the access time should meet PC-133 standard. The
maximum capacity of the on board memory is 1GB.

15
2.10 Watch-Dog Timer
There are three access cycles of Watch-Dog Timer as Enable,
Refresh and Disable. The Enable cycle should proceed by READ
PORT 443H. The Disable cycle should proceed by READ PORT
045H. A continue Enable cycle after a first Enable cycle means
Refresh.
Once if the Enable cycle activity, a Refresh cycle is request before
the time-out period for restart counting the Watch-Dog Timer period.
Otherwise, it will assume that the program operation is abnormal
when the time counting over the period preset of Watch-Dog Timer.
A System Reset signal to start again or a NMI cycle to the CPU
comes if over.
The JP12 is using for select the active function of Watch-Dog Timer
in disable the Watch-Dog Timer, or presetting the Watch-Dog Timer
activity at the reset trigger, or presetting the Watch-Dog Timer
activity at the NMI trigger.
JP12 : Watch-Dog Active Type Setting
JP12 DESCRIPTION
*1-2 System Reset
2-3 Active NMI
OFF Disable Watch-Dog Timer
The Watch-Dog Timer is disabled after the system Power-On. The
Watch-Dog Timer can be enabled by a Enable cycle with reading
the control port (443H), a Refresh cycle with reading the control port
(443H) and a Disable cycle by reading the Watch-Dog Timer
disable control port (045H). After a Enable cycle of Watch-Dog
Timer, user must constantly proceed a Refresh cycle to Watch-Dog
Timer before its period setting comes ending of every 1, 2, 10, 20,
110 or 220 seconds which pre-setting by JP11(5-10). If the Refresh
cycle does not active before Watch-Dog Timer period cycle, the on
board Watch-Dog Timer architecture will issue a Reset or NMI cycle
to the system.

16
 JP11 (5-10) : Watch-Dog Timer - Out Period
PERIOD 5-6 7-8 9-10
*1 sec ON ON ON
2 sec OFF ON ON
10 sec ON OFF ON
20 sec OFF OFF ON
110 sec ON ON OFF
220 sec OFF ON OFF
The Watch-Dog Timer is control by two I/O ports.
443H I/O Read The Enable cycle.
443H I/O Read The Refresh cycle.
045H I/O Read The Disable cycle.
The following sample programs showing how to Enable, Disable
and Refresh the Watch-Dog Timer:
WDT_EN_RF EQU 0443H
WDT_DIS EQU 0045H
WT_Enable PUSH AX ; keep AX DX
PUSH DX
MOV DX,WDT_EN_RF ; enable the watch-dog timer
IN AL,DX
POP DX ; get back AX, DX
POP AX
RET
WT_Rresh PUSH AX ; keep AX, DX
PUSH DX
MOV DX,WDT_ET_RF ; refresh the watch-dog timer
IN AL,DX
POP DX ; get back AX, DX
POP AX
RET
WT_DISABLE PUSH AX
PUSH DX
MOV DX,WDT_DIS ; disable the watch-dog timer
IN AL,DX
POP DX ; get back AX, DX
POP AX
RET

17
2.11 SCSI Controller
The HS-6039 provides SYMBIOS53C895 Ultra II SCSI Controller
transferred rate up to 80 Mbytes/Sec, and can drive up to 15 set SCSI
HDD. A JP6 is using for select the enable or disable function of SCSI
control.
 JP6 : SCSI Enable/Disable Select
JP12 DESCRIPTION
*1-2 Enable
2-3 Disable

18
2.12 VGA Controller
The HS-6039 provides three possible connectives of VGA connections. One
standard DB15 internal VGA connector as following CN26 pin information.
Another header is 5X2 internal VGA connector. Others internal 50-pin header
for LCD Panel connection as following CN14 pin information.
 CN14 : 50pin Internal LCD Panel Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 +12V 2 +12V
3 Ground 4 Ground
5 3.3V / 5V Note-1 6 ENAVDD
7 ENAVEE 8 Ground
9 P0 10 P1
11 P2 12 P3
13 P4 14 P5
15 P6 16 P7
17 P8 18 P9
19 P10 20 P11
21 P12 22 P13
23 P14 24 P15
25 P16 26 P17
27 P18 28 P19
29 P20 30 P21
31 P22 32 P23
33 P24 34 P25
35 SHFCLK 36 FP
37 M 38 LP
39 Ground 40 FPBACK
41 P26 42 P27
43 P28 44 P29
45 P30 46 P31
47 P32 48 P33
49 P34 50 P35
Note-1: Please setting the voltage correctly of individual panel by JP7