BOSER Technology HS-4706 User manual

HS-4706
HS-4706M
Intel®Pentium®M/ Celeron®M processor
ULV Intel®Celeron®M processor
Embedded Engine Board
‧CompactFlash‧DDR‧PCI Slot‧
‧CRT/LVDS Panel‧LAN‧Audio‧
‧ATA/33/66/100‧RS-232/422/485‧6 COM‧
‧USB2.0‧WDT‧H/W Monitor‧
‧Industrial Embedded Engine Board‧

Copyright Disclaimers
The accuracy of contents in this manual has passed thorough checking and review
before publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is
not liable for any infringements of patents or other rights resulting from its use. The
manufacturer will not be responsible for any direct, indirect, special,
incidental or consequential damages arising from the use of this product or
documentation, even if advised of the possibility of such damage(s).
This manual is copyrighted and BOSER Technology Co., Ltd. reserves all
documentation rights. Unauthorized reproduction, transmission, translation,
and storage of any form and means (i.e., electronic, mechanical, photocopying,
recording) of this document, in whole or partly, is prohibited, unless granted
permission by BOSER Technology Co., Ltd.
BOSER Technology Co., Ltd. reserves the right to change or improve the
contents of this document without due notice. BOSER Technology Co., Ltd.
assumes no responsibility for any errors or omissions that may appear in this
manual, nor does it make any commitment to update the information contained
herein.
T
T
Tr
r
ra
a
ad
d
de
e
em
m
ma
a
ar
r
rk
k
ks
s
s
BOSER is a registered trademark of BOSER Technology Co., Ltd.
ISB is a registered trademark of BOSER Technology Co., Ltd.
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
AMI is a registered trademark of AMI Software, Inc.
All other trademarks, products and or product names mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.
© Copyright 2006BOSERTechnologyCo., Ltd.
AllRightsReserved.
Edition1.0August10,2006

Table of Contents
Chapter 1 General Description..................................1
1.1 Major Features............................................................. 2
1.2 Specifications .............................................................. 3
1.3 Board Dimensions....................................................... 4
Chapter 2 Unpacking..................................................5
2.1 Opening the Delivery Package................................... 5
2.2 Inspection..................................................................... 5
Chapter 3 Hardware Installation ..............................7
3.1 Before Installation ....................................................... 7
3.2 Board Layout ............................................................... 8
3.3 Jumper List .................................................................. 9
3.4 Connector List............................................................. 9
3.5 Configuring the CPU................................................. 10
3.6 System Memory......................................................... 10
3.7 VGA Controller............................................................11
3.8 PCI E-IDE Drive Connector....................................... 13
3.9 Floppy Disk Drive Connector................................... 15
3.10 Parallel Connector..................................................... 16
3.11 Serial Port Connectors.............................................. 17
3.12 Ethernet Connector................................................... 18
3.13 USB Connector.......................................................... 19
3.14 CMOS Data Clear....................................................... 19
3.15 Power and Fan Connectors...................................... 20
3.16 Keyboard/Mouse Connector .................................... 21
3.17 System Front Panel Connectors.............................. 21
3.18 Watchdog Timer......................................................... 22
3.19 Audio Connectors ..................................................... 23
3.20 CompactFlash™Connector...................................... 23

Chapter 4 AMI BIOS Setup.....................................25
4.1 Starting Setup ............................................................ 25
4.2 Main Menu.................................................................. 26
4.3 Advanced Settings.................................................... 27
4.4 Advanced PCI/PnP Settings ..................................... 34
4.5 Boot Settings ............................................................. 35
4.6 Security Settings ....................................................... 38
4.7 Advanced Chipset Settings...................................... 39
4.8 APM Configuration.................................................... 41
4.9 Exit Options ............................................................... 42
Chapter 5 Software Utilities.....................................43
5.1 IDE Driver Installation ............................................... 44
5.2 VGA Driver Installation.............................................. 48
5.2.1 Win98........................................................................................................48
5.2.2 WinNT.........................................................................................................51
5.2.3 Win2000..................................................................................................53
5.3 LAN Driver Installation.............................................. 57
5.3.1 Win98.........................................................................................................57
5.3.2 WinNT........................................................................................................60
5.3.3WIN2K....................................................................................................................67
5.4 Audio Driver Installation........................................... 70
5.5 USB2.0 Driver Installation......................................... 72
5.5.1 Win98.........................................................................................................72
5.5.2 Win2000...................................................................................................76
5.5.3 WinXP........................................................................................................80

Safety Instructions
Integrated circuits on computer boardsare sensitive to static electricity.
To avoid damaging chips from electrostatic discharge, observe the
following precautions:
 Do not remove boards or integrated circuits from their anti-static
packaging until you are ready to install them.
 Before handling a board or integrated circuit, touch an unpainted portion
of the system unit chassis for a few seconds. This helps to discharge any
static electricity on your body.
 Wear a wrist-grounding strap, available from most electronic component
stores, when handling boards and components. Fasten the ALLIGATOR
clip of the strap to the end of the shielded wire lead from a grounded
object. Please wear and connect the strap before handling the HS-7250
to protect yourself from the discharge of any static electricity through the
strap.
 Please use an anti-static pad when putting down any components or
parts or tools outside the computer. You may also use an anti-static bag
instead of the pad. Please inquire from your local supplier for additional
assistance in finding the necessary anti-static gadgets.
NOTE: DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENT WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTION.

1
Chapter 1
General Description
The HS-4706/HS-4706M is an Intel®852GME GMCH/ICH4
chipset-based and HS-4706/HS-4706M is and Intel®852GM
GMCH/ICH4 chipset-based board designed embedded engine board.
HS-4706/HS-4706M provides Intel® Pentium®M/Celeron®M processor
1.3~2.8GHz, and HS-4706/HS-4706M provides ULV Intel®Celeron®M
processor 600MHz. The combination of these features makes the
HS-4706/HS-4706M an ideal all-in-one industrial embedded engine
board. Additional features include an enhanced I/O with CF reader,
CRT/LVDS Panel, LAN, audio, 6 COM and USB2.0 port interface.
Its onboard ATA/33/66/100 connected to IDE drive interface
architecture allows the HS-4706/HS-4706M to support data transfers
of 33, 66 or 100MB/sec. for each IDE drive connection. The display
controller is Intel®82852GME (HS-4706)/852GM (HS-4706M) for CRT
display supporting up to 1600 x 1200. It also provides 18-bit single
channel/36-bit dual channel LVDS Panel display interface.
System memory is also sufficient with the one DDR socket that can
support up to 1GB. It also provides one IDE interface Type II
CompactFlash card adapter connector.
Additional onboard connectors include two internal and two external
USB2.0 ports providing faster data transmission, and one external
RJ-45 connector for use of one 10/100 Base-TX Ethernet interfaces.

2
1.1 Major Features
Front Side
Solder Side
The HS-4706/HS-4706M comes with the following features:
 HS-4706 provides Intel®Pentium®M/Celeron®M processor 1.3~2.0GHz
HS-4706M provides ULV Intel Celeron M processor 600MHz/512K L2
cache
 HS-4706 provides 400/533MHz FSB
 One DDR socket with a max. capacity of 1GB
 HS-4706 use Intel®852GME GMCH/ICH4 system chipset
HS-4706M use Intel®852GM GMCH/ICH4 system chipset

3
 Winbond W83627HF super I/O chipset
 HS-4706 use Intel®852GME GMCH/ICH4 system chipset
HS-4706M use Intel®852GM GMCH/ICH4 system chipset
 LVDS Panel display interface
 Intel®82551QM fast Ethernet controller
 AC97 3D audio controller
 Fast PCI ATA/33/66/100 IDE controller
 CompactFlash card adapter, six COM, four USB2.0 ports
 Hardware Monitor function
1.2 Specifications
 CPU:
HS-4706 provides:
Intel®Pentium®M processor 760 2.0GHz
Intel®Pentium®M processor 745 1.8GHz
Intel®Celeron®M processor 370 1.5GHz
Intel®Celeron®M processor 320 1.3GHz
HS-4706M provides ULV Intel®Celeron®M processor 600MHz/512K L2
cache

Front Side Bus: Supports 400/533MHz FSB (only HS-4706)

Memory: One DDR socket supporting up to 1GB

Chipset: Intel®852GME GMCH/ICH4 (HS-4706), Intel®852GM
GMCH/ICH4 (HS-4706M)
 I/O Chipset: Winbond W83627HF
 CompactFlash: One, Type II IDE interface adapter

PCI Slot: One standard PCI slot

VGA: Intel®82852GME (HS-4706) / Intel®82852GM (HS-4706M)
supporting CRT display up to 1600 x 1200

LVDS Panel: Supports 18-bit single channel/36-bit dual channel LVDS
interface
 Ethernet: Intel®82551QM 10/100 Based LAN
 Audio: AC97 3D audio controller
 IDE: Four IDE disk drives supporting ATA/33/66/100 with transfer rates
of up to 33/66/100MB/sec.

FDD: Supports one slim floppy disk drive

Parallel: One enhanced bi-directional parallel port supporting
SPP/ECP/EPP
 Serial Port: 16C550 UART-compatible RS-232/485 x 1 and RS-232 x 5
serial ports with 16-byte FIFO

USB: Four USB2.0 ports, two internal and two external

4

Keyboard: PS/2 6-pin Mini DIN

Mouse: PS/2 6-pin Mini DIN

BIOS: AMI PnP Flash BIOS

Watchdog Timer: Software programmable time-out intervals from
1~256 sec.

CMOS: Battery backup

Temperature: 0~+60°C (operating)

Hardware Monitor: Winbond W83627HF

Board Size: 20.3(L) x 14.6(W) x 3.3(H) cm
1.3 Board Dimensions

5
Chapter 2
Unpacking
2.1 Opening the Delivery Package
The HS-4706/HS-4706M is packed in an anti-static bag. The board has
components that are easily damaged by static electricity. Do not
remove the anti-static wrapping until proper precautions have been
taken. Safety Instructions in front of this manual describe anti-static
precautions and procedures.
2.2 Inspection
After unpacking the board, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity.
Integrated circuits will sometimes come out of their sockets during
shipment. Make sure all integrated circuits, particularly the BIOS,
processor, memory modules, ROM-Disk, and keyboard controller chip
are firmly seated. The HS-4706/HS-4706M delivery package contains
the following items:

HS-4706/HS-4706M Board x 1
 Utility CD Disk x 1

Cables Package x 1
 Cooling Fan & Heat Sink x 1

Jumper Bag x 1
 User’s Manual

6
Cables Package
NO. Description
1 Four COM flat cable x 1
2 ATA/100 IDE flat cable x 2
3 Two USB flat cable with bracket x 1
4 MIC/Audio flat cable with bracket x 1
5 Floppy cable x 1
6 Printer flat cable with bracket x 1

7
Chapter 3
Hardware Installation
This chapter provides the information on how to install the hardware
using the HS-4706/HS-4706M. This chapter also contains information
related to jumper settings of switch, watchdog timer etc.
3.1 Before Installation
After confirming your package contents, you are now ready to install
your hardware. The following are important reminders and steps to
take before you begin with your installation process.
1. Make sure that all jumper settings match their default settings
and CMOS setup correctly. Refer to the sections on this chapter
for the default settings of each jumper. (Set JP1 1-2)
2. Go through the connections of all external devices and make
sure that they are installed properly and configured correctly
within the CMOS setup. Refer to the sections on this chapter
for the detailed information on the connectors.
3. Keep the manual and diskette in good condition for future
reference and use.

8
3.2 Board Layout

9
3.3 Jumper List
Jumper Default Setting Setting Page
JP1 Clear CMOS: Normal Operation Short 1-2 19
JP2 Onboard LAN Function Enabled/Disabled Select: Enabled Short 1-2 18
JP3 COM 4 Use RS-232 or RS-422/485 Select: RS-232 Open 17
JP4 Panel Voltage Select: +3.3V Short 2-3 11
JP5 CPU FSB Frequency Select: 400MHz FSB Short 3-4 10
3.4 Connector List
Connector Definition Page
CN1 COM 1/COM 2 Connector (DB9) 17
CN2 (1-15) 15-pin CRT Connector 11
CN2 (17-32) External Audio Connector 23
CN3 (1-14) RJ-45 Connector 18
CN3 (23-30) Dual USB2.0 Ports 19
CN4 COM 3~COM 6 Connector (5x2 header) 17
CN6 RS-422/485 Connector (3x2 header) 17
CN7 2-pin ATX Power Switch 20
CN8 (1-16) Control Panel Connector 21
CN8 (17-22) LAN LED Connector 18
CN8 (25-32) MIC In/Audio Out Connector 23
CN8 (33-40) Internal USB2.0 Ports 19
CN9 CompactFlash Connector 23
DM1 DDR Socket 10
FD1 Floppy Connector 15
FAN1 / FAN2 Fan Power In Connector 20
ID1 / ID2 Primary/Secondary IDE Connector 13
J1 Inverter Power In Connector 11
KR1 PS/2 6-pin Mini DIN KB and MS Connector 21
LP1 Parallel Port 16
PA1 / PA2 LVDS Panel Connector 11
PC1 Standard PCI Slot ----
PW1 20-pin ATX Power In Connector 20

10
3.5 Configuring the CPU
The HS-4706 provides Intel®Pentium®M/Celeron®M processor
1.3~2.0GHz, and HS-4706M provides ULV Intel®Celeron®M
processor 600MHz/512K L2 cache. It offers the convenience in CPU
installation with its auto-detect feature. HS-4706 provides 400/533MHz
FSB, if you want use 533MHz FSB, please setting JP5 as follow table.
 JP5: CPU FSB Frequency Select (for HS-4706 only)
Options JP5(1-2) JP5(3-4)
400MHz (default) Open Short
533MHz Open Open
1
3
2
4
Heat Sink Installation
Please smear the heat sink paste over CPU and 852GM GMCH
chipset uniformly. Then secure the heat sink as the picture above
3.6 System Memory
The HS-4706/HS-4706M provides one DDR socket at location DM1.
The maximum capacity of the onboard memory is 1GB.

11
3.7 VGA Controller
The display controller is Intel®82852GME (HS-4706)/82852GM
(HS-4706M) for CRT display supporting up to 1600 x 1200.
HS-4706/HS-4706M also provides 18-bit single channel/36-bit dual
channel LVDS display interface. The HS-4706/HS-4706M provides two
methods of connecting VGA device. CN2(1-15) offers a single
standard CRT connector (DB15), or PA1/PA2 offer 18-bit/36-bit LVDS
panel connectors.
 CN2 (1-15): 15-pin CRT Connector (DB15)
PIN Description PIN Description
1 RED 2 GREEN
3 BLUE 4 N/C
5 GND 6 GND
7 GND 8 GND
9 N/C 10 GND
11 N/C 12 SDA
13 HSYNC 14 VSYNC
15 SCL
16
10
11
515
 J1: Inverter Power In Connector
PIN Description
1 +12V
2 +12V
3 +5V
4 BackLight Enabled
5 LCD Enabled
6 GND
1 6
 JP4: Panel Voltage Select
Options Settings
+5V Short 1-2
+3.3V (default) Short 2-3
+3.3V
VLCD
+5V
1
3

12
 PA1: LVDS Panel Connector
PIN Description PIN Description
1 VCC3 2 VCC3
3 GND 4 GND
5 A0- 6 A0+
7 A1- 8 A1+
9 A2- 10 A2+
11 CLK1- 12 CLK1+
13 N/C 14 N/C
1
214
13
 PA2: LVDS Panel Connector
PIN Description PIN Description
1 VCC3 2 VCC3
3 GND 4 GND
5 A4- 6 A4+
7 A5- 8 A5+
9 A6- 10 A6+
11 CLK2- 12 CLK2+
13 N/C 14 N/C
1
214
13
NOTE: If using PA1 only, it just supports 18-bit single channel LVDS
Panel; If you want to use 36-bit dual channel LVDS Panel, please
using PA1 and PA2 combined.

13
3.8 PCI E-IDE Drive Connector
ID1 and ID2 are standard 40-pin daisy-chain driver connector that
serves the PCI E-IDE drive provisions onboard the
HS-4706/HS-4706M. A maximum of four ATA/33/66/100 IDE drives
can be connected to the HS-4706/HS-4706M via IDE1 and IDE2.
 ID1: Primary IDE Connector
PIN Description PIN Description
1 RESET 2 GND
3 PDATA 7 4 PDATA 8
5 PDATA 6 6 PDATA 9
7 PDATA 5 8 PDATA 10
9 PDATA 4 10 PDATA 11
11 PDATA 3 12 PDATA 12
13 PDATA 2 14 PDATA 13
15 PDATA 1 16 PDATA 14
17 PDATA 0 18 PDATA 15
19 GND 20 N/C
21 PDREQ 22 GND
23 PIOW# 24 GND
25 PIOR# 26 GND
27 PIORDY 28 PD1-
29 PDACK- 30 GND
31 Interrupt 32 N/C
33 PDA1- 34 PATA66
35 PDA0- 36 PDA2-
37 PCS1- 38 PCS3-
39 HDD Active 40 GND
1
240
39
3 5 7 9 17 19 21 23 25 27 29 31 33 11 13 15 35 37
46810 18 20 22 24 26 28 30 32 34
12 14 16 36 38

14
 ID2: Secondary IDE Connector
PIN Description PIN Description
1 RESET 2 GND
3 SDATA 7 4 SDATA 8
5 SDATA 6 6 SDATA 9
7 SDATA 5 8 SDATA 10
9 SDATA 4 10 SDATA 11
11 SDATA 3 12 SDATA 12
13 SDATA 2 14 SDATA 13
15 SDATA 1 16 SDATA 14
17 SDATA 0 18 SDATA 15
19 GND 20 N/C
21 SDREQ 22 GND
23 SIOW# 24 GND
25 SIOR# 26 GND
27 SIORDY 28 SD1-
29 SDACK- 30 GND
31 Interrupt 32 N/C
33 SDA1- 34 SATA66
35 SDA0- 36 SDA2
37 SCS1- 38 SCS3-
39 HDD Active 40 GND
1
240
39
3 5 7 9 17 19 21 23 25 27 29 31 33 11 13 15 35 37
46810 18 20 22 24 26 28 30 32 34
12 14 16 36 38