BOSER Technology BPC-5019 User manual

BPC-5019
19” High Speed Panel PC
with one PCI slot, 180W ATX P/S

Copyright Disclaimers
The accuracy of contents in this manual has passed through checking and review before
publishing. BOSER Technology Co., Ltd., the manufacturer and publisher, is not liable for
any infringements of patents or other rights resulting from its use. The manufacturer will
not be responsible for any direct, indirect, special, incidental or consequential
damages arising from the use of this product or documentation, even if advised of
the possibility of such damage(s).
This manual is copyrighted and BOSER Technology Co., Ltd. reserves all
documentation rights. Unauthorized reproduction, transmission, translation, and
storage of any form and means (i.e., electronic, mechanical, photocopying, recording)
of this document, in whole or partly, is prohibited, unless granted permission by BOSER
Technology Co., Ltd.
BOSER Technology Co., Ltd. reserves the right to change or improve the contents of
this document without due notice. BOSER Technology Co., Ltd. assumes no
responsibility for any errors or omissions that may appear in this manual, nor does
it make any commitment to update the information contained herein.
T
T
Tr
r
ra
a
ad
d
de
e
em
m
ma
a
ar
r
rk
k
ks
s
s
BOSER is a registered trademark of BOSER Technology Co., Ltd.
ISB is a registered trademark of BOSER Technology Co., Ltd.
Intel is a registered trademark of Intel Corporation.
Award is a registered trademark of Award Software, Inc.
AMI is a registered trademark of AMI Software, Inc.
All other trademarks, products and or product names mentioned herein are
mentioned for identification purposes only, and may be trademarks and/or
registered trademarks of their respective companies or owners.
© Copyright 2008 BOSER Technology Co., Ltd.
All Rights Reserved.
Edition 1.1, December 28, 2010

Table of Contents
Chapter 1 General Description ..................................1
1.1 Major Features....................................................................... 2
1.2 Specifications ........................................................................ 2
1.3 Dimensions ............................................................................ 6
Chapter 2 Unpacking ..................................................7
2.1 Opening the Delivery Package............................................. 7
2.2 Inspection............................................................................... 7
Chapter 3 Hardware Installation ..............................9
3.1 HDD/CD-ROM/PCI Card Installation .................................... 9
Chapter 4 Touch Screen Driver Installation ..........13
4.1 Touch Screen Driver Installation ....................................... 13

Declaration of Conformity -- CE Mark
BOSER Technology hereby acknowledges that compliance testing in
accordance with applicable standards of the EU’s EMC Directive,
89/336/EEC, was successfully completed on a sample of the equipment
identified below:
Equipment Class: Information Technology Equipment
Product Model Series: BPC-5019
This Product Complies With: EN55022: Class A for Radiated emissions
EN50082-2: Heavy Industrial EMC Immunity
We, the undersigned, hereby declare that the equipment specified above
conforms to the above directives and standards.
Manufacturer:
BOSER TECHNOLOGY CO., LTD.

Safety Instructions
The safety recommendations outlined in this section are to be read,
understood and followed before operating the product. Keep this
information in a safe place for future reference. Failure to comply with any
of the following safety procedures could result in serious damage.
Do not operate product for any purposes other than its intended use
This product is intended for indoor use only
Do not operate product if power cord is damaged in anyway
Do not insert objects into openings
Do not immerse product in water or permit liquids to spill inside
Turn off power when unattended or not in use. Unplug product before
moving it or when it is not in use for an extended period of time. The
socket-outlet shall be installed near the equipment and shall be easily
accessible
Do not alter or extend electric plug. Plug is configured for appropriate
electrical supply
Do not overload electrical outlets beyond their capacity as this can result in a
fire
NOTE: DO NOT TOUCH THE PRODUCT OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTIONS.

Life Expectancy of Constituent Parts
This section describes the life expectancy of constituent parts (backlight,
power supply, internal cooling fan and touch screen) which make up to
BPC-5019.
TFT Display Backlight
Display brightness decreases over time with use. The expected operating
lifetime of the backlight time to reach 50% initial brightness) is 30,000 hours
(assuming continuous lit state at 25 degrees C). Actual lifetime before result
may be different.
Touch Screen
The operating lifetime of the touch screen is approximately 1 million
operations (as tested by mechanical manipulation under 100g of force at a
rate of two presses per second)

1
Chapter 1
General Description
The BPC-5019 is an industrial-grade panel PC that provides one
convenient 5V PCI slot for expansion.
*NOTE: check PCI device specification that will not be blocked with
others first before you to do so.
The rear of BPC-5019 design with easy assembly when needed.
The BPC-5019 has a 19” touch screen that operates under all types of
working environment. It comes with a reliable power supply and 3 of
4cm ball bearing cooling fan that enhance system stability.
The unit can also be mounted in several configurations. A variety of
BOSER SBCs is compatible with the BPC-5019. Please see 1.2
Specification section for more detail.
zThe BPC-5019 is IBM PC/AT compatible and can draw
from a large body of hardware and software resources
worldwide

2
z180W power supply with UL, CE, CSA, TUV approved
zVariety of operation system can be used in BPC-5019
zThe BPC-5019 features an all-in-one flat display and
keyboard less operation.
zThe BPC-5019 can be use widely such as, Digital
signage, Factory Automation, oil Industry,
Entertainment, transportation, POS, and kiosk, etc...
zYou can select a mainboard from various ranges to meet
your optimal configuration and budget.
1.1 Major Features
The BPC-5019 series come with the following features:
¾Aluminum front panel design
¾19” TFT color panel display
¾Built-in OSD key, touch screen, 180W ATX P/S
¾BPC-5019-C w/HS-1752, provides Intel® P-M/C-M processor,
6 x COM, 6 x USB2.0
¾BPC-5019-Q w/HS-1750, provides Intel® Core™ Duo processor, 4
x COM, 6 x USB2.0, DVI display, PCI expansion slot
¾Onboard graphics, dual GbE, audio controller
¾1 x 2.5” HDD space, 1 x slim CD-ROM space
¾3 x 4cm ball bearing cooling fan
¾Option for Wireless LAN module
1.2 Specifications
zSystem
BPC-5019-C
SBC Model
HS-1752
CPU
Intel® Pentium® M/Celeron® M processor in the u-FCPGA 478
package (option)
BIOS
Award BIOS with 4Mb Flash EEPROM
System Chipset
Intel® 915GME/ICH6-M
System Memory
2 x 240-pin DIMM socket DDR2 533MHz up to 2GB

3
Display Chipset
Intel® 915GME
Audio Chipset
RealTek ALC655 5.1CH audio codec
Ethernet Chipset
Dual RealTek RTL8111B 10/100/1000 Mbps LAN
Provides Wireless LAN module (option)
Drive Bay
1 x 2.5” HDD space
1 x Slim CD-ROM space
Watchdog Timer
Reset: 1 sec.~255 min. and 1 sec. or 1 min./step
External I/O
6 x USB2.0, 6 x COM, VGA, 2 x LAN, PS/2 KB/MS, MIC In, Line
In, Line Out, AD Board VGA
Rear I/O
BPC-5019-Q
SBC Model
HS-1750
CPU
Intel® Core™ Duo T2050 processor (option)
BIOS
Award BIOS with 4Mb Flash EEPROM
System Chipset
Intel® 945GME/ICH7-M
System Memory
2 x 200-pin SO-DIMM socket DDR2 667MHz up to 4GB
Display Chipset
CRT: Intel® 945GME
DVI: Chrontel CH7307
Audio Chipset
RealTek ALC655 5.1CH audio codec

4
Ethernet Chipset
Dual Marvell 88E8053 10/100/1000 Mbps LAN
Provides Wireless LAN module (option)
Drive Bay
1 x 2.5” HDD space
1 x Slim CD-ROM space
Watchdog Timer
Reset: 1 sec.~255 min. and 1 sec. or 1 min./step
Expansion Interface
1 x Standard PCI expansion slot
External I/O
6 x USB2.0, 4 x COM, PS/2 KB, PS/2 MS, VGA, DVI, 2 x LAN,
MIC In, Line In, Line Out, AD Board VGA
Rear I/O
zPanel & Touch Screen
LCD Size
19”
Max Resolution
1280 x 1024 pixels
Brightness (cd/m2)
300
Contrast Ratio
800:1
LCD Color
16.7M colors
Pixel Pitch (mm)
0.098 x 0.294
OSD
Provides OSD function
Touch Screen
19” resistive

5
zMechanical & Environmental
Thermal System
3 x 4cm ball bearing cooling fan
Dimensions (LxHxW)
49.0 x 39.0 x 9.82 cm
Cut Out Size (LxH)
43.4 x 34.4 cm
Operation Temperature
0~+45 degrees C
Storage Temperature
-20~+70 degrees C
EMC
FCC/CE
Front Panel Protection
IP65 compliance
Power Supply
100~240V AC in 180W ATX power supply

6
1.3 Dimensions

7
Chapter 2
Unpacking
2.1 Opening the Delivery Package
The BPC-5019 is packed with an anti-static bag. The board contains
sensitive electrical components that are easily damaged by static
(electricity). Do not remove the anti-static wrapping until proper
grounding have been taken. Safety instruction has been described the
anti-static precautions and procedures in the previous.
2.2 Inspection
After unpacking the Panel PC, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Grounding the board and exercise extremely careful to
prevent any damages to the board from static.
Integrated circuits will sometimes come out from sockets during
shipment. Examine all integrated circuits, particularly the BIOS,
processor, memory modules, ROM-Disk, and keyboard controller chip
to ensure that they are firmly seated. The BPC-5019 delivery package
contains the following items:
BPC-5019 x 1, w/Power Cable x 1
Drive CD Disk x 1, including User’s Manual
It is recommended that user keeps all the parts of the delivery package
intactness and store them in a safe/dry place for any require the
returning the product. In case you find any missing and/or damaged
items from the list, please contact your dealer or sale representatives
immediately.

8
This page intentionally left blank.

9
Chapter 3
Hardware Installation
This chapter illustrates how to install components into the Panel PC
system. External interface please refers to system board’s manual.
3.1 HDD/CD-ROM/PCI Card Installation
1. Remove the HDD drive bay holding bracket.
2. Install the holding bracket with HDD.

10
3. Remove the CD-ROM drive holding bracket.
4. Install the holding bracket with CD-ROM.

11
5. Install the PCI Card holding bracket.
6. Install the PCI Card with chassis.
7. Use two screws install PCI Card with front panel.

12
This page intentionally left blank.

13
Chapter 4
Touch Screen Driver Installation
This chapter illustrates the detailed information for touch screen driver
installation procedures. The utility disk that came with the delivery
package contains an auto-run program that invokes the installation
programs for the touch screen driver. The following sections describe
the installation procedures of driver based on WIN2000 operating
systems. Other operation system may slightly different.
4.1 Touch Screen Driver Installation
4.1.1 Installing Touch Screen Driver
1. Insert the utility CD dist to your CD-ROM drive. The main menu
will pop up as shown below
2. The screen displays copying “Setup Wizard” and “PenMount
Utilities Installation” screen plus “welcome” message appear,
click on Next>.

14
3. The next screen is “Choose Install Location”, select “Browse” to
choose where to install and click on “Install” to begin
installation.
4. Once the Install Shield Wizard finishes updating your system,
click on Finish to exit the wizard. We recommend you to
reboot your computer to enable the functions.