Boss Audio Systems BV11.2BGT Manual

Installing The Snap On Covers
Housing Snap On Cover
(Screen Back Cab)
Snap On Cover
(Shroud 1)
Snap On Cover
(Shroud 2)
Pry Tool
1. 2. 3. 4. 5.
Place the pod on a soft surface to avoid damaging the plastic.
Installing The Shroud
Begin by hooking the area and slide the cover over the pod. The cover will snap in place.
Installing The Screen Cover
Openthescreenandhookthetwotabs(A)onthebottomedgeofthescreen.Snapthe
opposite side over the hinge.
(A) (A)
Removing The Snap On Cover(Shroud) From The Housing
1 2
3 4
Working on a soft surface to avoid damaging the plastic.
Insert the between the and ,
then press the to release the
pry tool Housing Snap On Cover (Shroud)
pry tool
supplied
Snap On Cover (Shroud).
Removing The Snap On Cover(Screen Back) From LCD The Housing
Working on a soft surface to avoid damaging the plastic.
Insert the supplied between the and ,
then press the to release the
pry tool Housing Snap On Cover (Screen Back)
pry tool Snap On Cover (Screen Back).
1 2 3
4