BOSS ILLUMINATION KOI M User manual

www.bia.lighting | [email protected]page 1 / 2
PRODUCT MANUAL
COPYRIGHT BIA ©2020 V09.20
WARRANTY STATEMENT This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will x
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specications and other information, modify products and discontinue items without prior notication.
PRODUCT VARIANTS
CCT : 3000K
4000K
6000K
RGB (PWM Dimmable)
Beam Angle: 20°
60°
KOI M
SPOTLIGHT
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
PARTS INCLUDED
LED
Luminaire
Driver
ScrewsWall plugs Allen key
x4 x4 x2x1
Crontroller
OPTIONAL COMPATIBLE PARTS sold separately
ADDITIONAL INFORMATION
1. Luminaire is adjustable.
2. This product is suitable for outdoor use.
3. If cleaning maintenance is required, disconnect from mains
supply and allow luminaire to cool. Use a clean microbre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
4. Do not use harsh chemicals or solvents. Do not use high
pressure cleaners.
5. Care must be taken during installation and maintenance to
prevent accidental damage to the surface of the luminaire.
These damages may result in corrosion.
Disclaimer: Please read this product
manual carefully before installing the
product.
Warranty is void if installation
guidelines are disregarded, if the
product has been modied, or if
damage is caused by misuse or
improper installation.
Images, drawings and diagrams are for
illustrative purposes only.
BIA products are manufactured
and certied in accordance with all
mandatory Australian Standards.
Technical data and information subject
to changes. Please visit our website
for latest version.
PRODUCT SPECIFICATIONS
Power : 3W
Input Voltage : 24V DC
Operating Temperature: -10 to 40°C
Material : Stainless steel 316
IP68 IK10

www.bia.lighting | [email protected]page 2 / 2
PRODUCT MANUAL
COPYRIGHT BIA ©2020 V09.20
INSTALLATION INSTRUCTIONS
1. Before commencing installation, ensure the
main power is switched off.
2. Measure and prepare holes on installation
surface. Insert wall plugs.
3. Connect and waterproof cables accordingly.
4. Secure base of luminaire onto the installation
with screws.
5. Loosen the nut screws on the sides to adjust
the angle of the luminaire, tighten to secure
the angle.
6. Turn on main power.
DIMENSION DIAGRAM
IMPORTANT NOTE: All connections made
must be waterproofed to the appropriate IP
rating for the application. Warranty is void if
connection IP ratings are not met.
50mm
70mm70mm
89mm
350º
360º
3
5
2
4
24V single 24V RGB
+
+- +- +-
-
+
-
DRIVER
CONTROLLER
+
RGB+RGB+RGB+
-
+
-
Basic wiring chart
Control gear and wiring requirements may differ
depending on quantity and application. Please
verify before installation.