bouncepad LINK User manual

Sheet Code: BP-IM-074_REV2
Release Date: 08/04/2022
Copyright 2022 Spotspot Ltd. (T/A
Bouncepad) all rights reserved.
Condential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder.
LINK
Assembly Instructions
In the Box
Fixings List
* Due to the modular nature of
our product range you may receive
additional xings in the xings kit
1x tie
Fixings Kit
Remove Front and Back Screw Covers.
1Remove Faceplate. 2 3 Remove Cable Lock.
Select your PoE device and note it’s location in relation to the mounting slots
4
Link
back screw cover
front screw cover
faceplate
1x T10
Pin Torx
Allen Key
Tools Required to Fix From Above:
Drill + drill bits
Pencil
16mm Hole Saw
4x No.8
Countersunk,
Self tapping
Screw
4x Rawl Plugs1x Velcro Pad
6x M3 x 6mm
Countersunk
Pin Torx
Screws
BELKIN
Ethernet + Power
REDPARK
Gigabit+PoE Adapter L6-NETPOE
TEXAS POE
GAF-Lightning-PD
TEXAS POE
GAT-USBC-PD

Insert the tie through the cable slots
and then clasp over the POE device.
5
A2A1 Use a drill bit suitable for your
surface and make 4x pilot holes
Use a pencil to mark pilot hole
locations.
A4 Secure the Link to the surface with 4x
No.8 Self tapping screws. Rawl plugs
are provided if required.
A3 If running a ethernet or USB cable
through the surface use a hole saw in
the cable exit position.
MOUNT FROM ABOVE
No.8 Self
tapping screw
power drill
drill bit
16mm hole saw
pencil
Power-Over-Ethernet
device (POE)
tie
76 Feed the ethernet cable through the
cable exit.
Specically for Texas PoE GAT-USB-
PD use velcro pad for attachment
8Connect the ethernet cable to the
POE and secure the cable with the
cable lock.
Connect the USB cable to the tablet,
then place inside the enclosure. Re-
attach the faceplate.
9
Optional (skip to step 8 for freestanding)
Locate PoE device
here with Velcro

13 For additional security, tether your
Link with a Kensington security
cable. *Security cable not provided.
11 Reattach the front and back screw
covers
Set up the video-conferencing
software and peripherals as per the
provider’s instructions.
12
TV / PC monitor
computer Link
kensington lock
video-conferencing
camera
10 Use 6x M3 Screws to secure faceplate.