BOWMAN Dispensers
20325 71st Ave NE, Suite D, Arlington, WA 98223
800.962.4660 • www.BowmanDispensers.com
%2:0$10DQXIDFWXULQJ&RPSDQ\,QF$OO5LJKWV5HVHUYHG3URGXFWVSHFLÀFDWLRQVVXEMHFWWRFKDQJHZLWKRXWQRWLÀFDWLRQ&RQVXPDEOHVQRWLQFOXGHGCP075TDSa
CP-075 - Installation/Characteristics & Care
Information subject to change without notice. Dimensions are approximate. (Not to scale)
2
1
Installation Instructions/Characteristics & Care
/ŶƐƚĂůůĂƟŽŶ
ůǁĂLJƐŵŽƵŶƚĚŝƐƉĞŶƐĞƌƐƐĞĐƵƌĞůLJpriorƚŽ
ůŽĂĚŝŶŐǁŝƚŚƉƌŽĚƵĐƚ
ABS Plastic
PETG Plastic
Care and Construction
Material Characteristics
Material Characteristics
Care and Cleaning
Care and Cleaning
Designed for Long-Term, Heavy-Duty Applications
Designed for Long-Term, Heavy-Duty Applications
The combination of copolymers (Acrylonitrile, Butadiene,
and Styrene) gives ABS an excellent combination of
strength, rigidity, and toughness.
ABS is chemical, stress-crack resistant, dimensionally
stable, and will hold up to long-term use. It possesses high
strength and performance characteristics at a reasonable
cost.
Copolyester resin is designed for heavy-duty applications,
and is used by BOWMAN® Dispensers. We never use
acrylic in our products.
Copolyester (PETG) is typically 15-20 times tougher than
general purpose acrylic. PETG is made to withstand
handling and reduce losses due to breakage.
PETG resists a variety of chemicals and commonly used
cleaning agents. It is tough and durable (not brittle),
providing years of trouble-free functionality and long life.
Clear optical characteristics mean the viewer can see
the content, read text, and see true colors through the
material. It complies with FDA regulations for food contact.
Use mild soap and water to clean. Petroleum-based oils,
solvents, and paints should not be used.
Standard hospital cleaning supplies are approved for use
on our ABS plastic products.
Most cleaning chemicals do not weaken the surface or
cause damage to the material. Suggested cleaning method
is to use a soft cloth, warm water, and mild soap.
Parts included:
• Dispenser
Tools Required:
• No tools required to assemble dispenser
• Mount securely to a wall with screws approved and supplied
by building maintenance.
• Clear design allows view of contents, while thelocking door
protects contents.
Eyewear Dispenser - Locking
CP-072
