
PXFB8102042 PXFB810204R
3660740010027 3660740010034
B810
PXFB8102042 52/17 Z87-2+ 133 mm
PXFB810204R 54/17 Z87-2+ 133 mm
B810
11/01/2020
bollesafety-usa.com
Bollé Safety-USA
2810 Caribou Court, Suite 160
Carlsbad, CA 92010
USA
• Crown = Manufacturer Mark
• Z87+ = Impact rated for Plano product - tested and approved
to ANSI Z87-2+
• Crown = Manufacturer Mark
• Z87+ = Impact rated for Plano product - tested and approved
to ANSI Z87-2+
• Splash/droplet protection = D3
• Nuisance Dust protection = D4
• Fine Dust protection = D5
• Country of origin = Taiwan
ANSI: guaranteed minimum resistance of the protective eyewear against
everyday risks including dropping the protective eyewear onto the ground,
ageing by light exposure, exposure to heat or corrosion etc.
Maximum protection for glasses. Use for high speed
particles at extreme temperatures.
Bollé Safety product approval certicates to ANSI standards
will be sent on request.
WARNING: Reproductive Harm – www.P65Warnings.ca.gov
MODEL VERSIONS REFERENCES SIZE FRAME MARKING TEMPLE LENGTH
PURE PROTECTION
CORRECTED BASE:
FRAME MARKINGLENS MARKING
CLEANING AND STORAGE
Corrected base : 4
PACKAGING AND EAN13 CODE
CHARACTERISTICS
FRAME MATERIAL TR90 - Metal - Nylon
Per piece
CLEANING : The lenses should be cleaned regularly. Bollé Safety recommends only using
the B-clean lens cleaning system.
MAINTENANCE : Pitted, scratched or damaged lenses must be replaced by replacing the
complete product. If the frame is damaged also replace the complete product. After each
use it is recommended to keep the spectacles or goggles in a microber pouch or rigid case.
STORAGE : All products must be stored in a dry and clean environment.
Translucent grey
and black
Translucent grey
and black