
DIGIMIC
DLine32
Quick Guide
3
Auf der Alten Burg 6
53639 Königswinter
Germany
F +49 (0)2244 930-450 sales@braehler-systems.com
www.braehler-systems.com
05.0065 190521 V1.0 BRÄ LER Systems is committed to continually improving its products and so reserves the right to make technical modifications without notice.
Operation
Connect the DLine32 with the DCen32 and your conference units. Connect the desired audio input devices
(e.g. wireless microphone, lectern, etc.). The devices are immediately ready for use in the system via the
DIGIMIC DLine32 and can be controlled via computer or operating button.
Press the control buttons to switch on the external audio source manually. Press the button again to switch the
external audio source off.
The operating buttons light up red when switched on.
Warnings
The ports of the DIGIMIC DLine32 are only suitable for devices of the DIGIMIC family. Do not connect
any other devices!
In case of malfunctions, contact a technician, do not attempt to repair, unscrew or similar the DLine32
yourself.