Bragi The Headphone User manual

support.bragi.com
Quick Start Guide
The Headphone
Bragi GmbH, Sendlinger Str.7 / Angerblock, 80331 Munich, Germany, Earth
Copyright ©2015 Bragi GmbH. All rights reserved. BRAGI, The Dash, and the B logo are trademarks
of Bragi GmbH in the U.S. or one or more other countries. The absence of a product or service name
or logo from this list does not constitute a waiver of Bragi GmbH trademark or other intellectual
property rights concerning that name or logo. Patents pending.
v2, 2016 - 11, THP QSG English
BT: 2402~2480 MHz NFMI: 10.579MHz

3
3 sec.
Power on & connect to last device
Play / Pause / Answer call
Next track
Previous track
End call / Voice Assistant
Power off / Pairing mode
To enter pairing mode hold for 3 seconds
until the right LED starts blinking.
Select BRAGI HP in the Bluetooth
settings on your device.
Before pairing to a new device, make sure
your Headphone is switched off.
Press.
Hold. Volume up
Audio Transparency on
Volume down
Audio Transparency off
Get started.
Insert. PerfectFit.
Try different FitTips for the PerfectFit.
LED is on untilyourHeadphone is connected
LED blinks x4 / blinks untilyourHeadphone is connected
1 sec.
1 sec.
1 sec.
1 sec.
Press
Press
Press
2× Press
3× Press
3 sec.