Broyhill THORNWOOD GB21-819 User manual

ASSEMBLY INSTRUCTIONS
ITEM# : GB21-819
SKU# : 810500147
THORNWOOD WOOD LOOK COFFEE TABLE
Need help? We are here for you! 1-888-733-8169 Toll Free
Or email us at [e-mail],[e-mail]
[e-mail]

Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Helpful hints provided along the way
Retain these assembly instructions for future reference.
WARNINGS:
Use the correct bolts as indicated. All bolts should be hand tighten until the complete piece is assembled ( This will make the assembly
process much easier ). Once the piece is fully assembled, then go back and tighten all bolts with provided tool.
Regularly check hardware and tighten if necessary.
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children and pets away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
The table is not to be used for standing purposes, standing on or misuse of ottoman may result in damage or injury.
Not intended for commercial use.
MAINTENANCE
Wash frame with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other solvents on the frame
Well recommend the use of furniture covers when not in use.
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and safety of your product.
In order to prolong the life and beauty of your product, we recommend that it be stored in a dry and protected area during off season periods.
GENERAL BEST PRACTICE FOR ASSEMBLY:
WARNINGS:
MAINTENANCE:

PARTS LIST
Part No. Part Qty Image Part No. Part Qty Image
1Table Top 1 4Table Tray 1
2Table Leg
(Model 1) 25Bolt (M6x25mm) 12
3Table Leg
(Model 2) 26Washer 12
Tools
PART REQUIRED: 1, 2 & 3
Keep the bolts loose.
PARTS LIST:
STEP 1
X8
X8
6
1
2
3
3
2
5

STEP 2
PART REQUIRED: 1, 2, 3 & 4
Keep the bolts loose.
STEP 3
Tighten all bolts. Finished!
Warranty
One-year limited warrantly.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer's responsibility for freight and packing charges to and from the service center.
STEP 2
STEP 3
3
2
4
2
3
5
6
X4
X4