Braun TributeCollection FX 3020 User manual

Type 3202
www.braunhousehold.com FX 3020
Food processor
TributeCollection

English 4
9
De’Longhi Braun Household GmbH
Carl-Ulrich-Straße 4
63263 Neu-Isenburg/Germany
5722010184/03.15
UK/KR

8
9
7
14
2
1
36
13
54
10
12
11a
11
20
19
16
17
18
15
a
c

4
English
Our products are engineered to meet the
highest standards of Quality, functionality
and design. We hope you thoroughly
enjoy your new Braun appliance.
Before use
Please read instructions carefully and
completely before using the appliance.
Caution
• The blades are very
sharp! Take hold of the
blades by the knob only. After use,
always first remove the blade
from the bowl before removing
the processed food.
• This appliance can be used by
persons with reduced physical,
sensory or mental capabilities or
lack of experience and knowledge
if they have been given supervision
or instruction concerning use of
the appliance in a safe way and if
they understand the hazards
involved.
• Children shall not play with the
appliance.
• This appliance shall not be used
by children.
• Children shall be kept away from
the appliance and its mains cord.
• Cleaning and user maintenance
shall not be made by children
without supervision.
• Always unplug or switch off the
appliance when it is left unattended
and before assembling, disas-
sembling, cleaning and storing.
• If the supply cord is damaged, it
must be replaced by the manu-
facturer, its service agent or
similarly qualified persons in
order to avoid a hazard.
• Before plugging into a socket,
check whether your voltage cor-
responds with the voltage printed
on the bottom of the appliance.
• Be careful if hot liquid is poured
into the food processor or blender
as it can be ejected out of the appli-
ance due to a sudden steaming.
• This appliance is designed for
household use only and for
processing normal household
quantities.
• Do not use any part in the micro-
wave.
• Make sure to avoid touching the
running drives with your fingers.
Put on the protective cover when-
ever a drive place is not in use,
since both drives rotate simul-
taneously when switching on the
appliance.
Description
The Braun food processor with the 2-bowl
system meets highest demands for
kneading, mixing, blending, chopping,
slicing, shredding and grating, both
simply and quickly.
To obtain best results, two different
working bowls are available: a large
food processor bowl 7and a small
chopper bowl j.
Thus, for chopping, puréeing or mixing
you can choose between the large and
the small working bowl. Moreover, you
can use the small bowl to prepare the
food which then can be further proces-
sed in the large bowl (e.g. to chop nuts
for a nut cake dough). Only one bowl
can be operated at a time.
1 Motor block
2 Cord storage
3 Motor switch (on = «I», off = «O»)
4 Pulse mode «»
5 Variable speed regulator (1-15)
6 Safety lock (avoids simultaneous
operation of both working bowls)
7 Food processor bowl (2 l capacity)
8 Lid for food processor bowl 7
9 Pusher for lid 8
j Chopper/mixer bowl for small
tquantities (0.75 l capacity)
q Lid for chopper bowl j
ß
11a
Seal ring for lid q
l Blade for chopper bowl j
m Protective cover for motor drive
when bowl has been taken off
Attachments for food processor
bowl 7
nBlade for food processor bowl 7with
protective cover
oInsert carrier
pFine slicing insert – a
qFine shredding insert – b
rFrench-fries system
sKneading hook
tWhipping attachment
Note: Before using the food processor
for the first time, clean all parts as
described under «Cleaning».
Overload protection
In order to avoid damages caused by
overload, this appliance is equipped with
an automatic security switch which
shuts off the current supply if necessary.
In such case, turn the motor switch 3
back to «O» and wait approx. 15 min-
utes to allow the motor to cool off before
switching on the appliance again.
Pulse mode «»
The pulse 4 mode is for example useful
for the following applications:
• Chopping delicate and soft food, e.g.,
eggs, onions or parsley.
• Carefully folding flour into dough or
batter to maintain the creaminess.
• Adding whipped eggs or cream to
more solid food.
The pulse mode «» is activated by
turning the motor switch to the left.
The switch does not catch at this
setting. Hold the switch in pulse
position or turn it to pulse position
repeatedly.
Before activating the pulse mode, set
the desired speed with the speed regu-
lator 5. When releasing the pulse mode,
the appliance is switched off.
Recommended speed ranges
for individual attachments
Set the speed range by means of the
variable speed regulator 5. It is recom-
mended to first select the speed and
then switch on the appliance in order to
work with the desired speed right from
the beginning.
Attachments Speed range
Kneading hook 7
Blade l and n6 - 15
Whipping attachment:
– egg-whites 4 - 5
– cream 2
Slicing and
shredding inserts 1 - 8
French-fries system 1 - 2
(please also refer to product printing)
Working with the 2-bowl
system
Only one working bowl can be
operated at a time.
The working bowl which is not used
must be in the upper position or addi-
tionally, can be turned in the «click»
direction where it is locked in place.
When the arrow markings are aligned,
the bowl can be taken off. For safety
reasons, always put the protective cover
monto the free drive shaft after a bowl
has been taken off.
Double safety feature
The appliance can only be switched on
when the desired working bowl with lid
is properly engaged. If the lid is opened
during operation, the motor switches off
automatically. As in this case the motor
switch 3is still on «I», turn it back to
«O» to avoid switching on the motor
accidentally.

5
Attaching the working bowls
The food processor bowl 7is operated
on the large drive place of the motor
block 1. The chopper bowl jis operat-
ed on the small dirve place.
1. With the motor switched off, place
the respective bowl onto its drive place
matching the arrow on the bowl with
the arrow on the motor block (A).
1
2
A
1
2
click
B
pulse
off/0
click
1
1
C
2
Then turn the bowl in the «function»
direction until the lower fixed stop is
reached. The bowl on the other drive
place must be in the lifted position.
If the other drive place is free, put on
the protective cover m.
2. Put the attachment needed (see
instructions for each of the attachments)
onto the drive shaft of the bowl and
push it down as far as it will go (B).
When inserting the blade lonto the
chopper bowl j, push it down until it
audibly snaps in place.
3. Put the lid onto the bowl matching
the arrow on the lid with the arrow on
the bowl (C).
N.B.
When attaching the lid qof the chopper
bowl j, it must be provided with the
seal ring ß
11a
.
Removing the working bowls
Switch off the appliance. Turn the lid
anti-clockwise and lift it off. Then turn
the bowl in the «click» direction until the
arrow on the bowl matches the arrow on
the motor block and lift off the bowl.
When removing the blade from a bowl,
take hold of it by the knob and pull it off.
Caution: The blades are very sharp!
The blade ncomes with a protective
cover. If not in use, store the blade on
the protective cover.
Note: If you continue turning the food
processor bowl in the «click» direction
as far as it will go, beyond the stop posi-
tion, you can lock the food processor
bowl on the motor part. In this position,
however, you cannot switch on the
motor.
Cleaning
First, always switch off the motor and
unplug the appliance. Clean the motor
block 1with a damp cloth only.
All parts can be cleaned in the dish-
washer. If necessary, clean all parts
thoroughly with a spatula or a brush
before rinsing them.
Color-intensive food (e.g. carrots) may
leave stains on the plastic parts; wipe
them off with cooking oil before cleaning
with water.
For cleaning the lid q, first remove the
seal ring ß
11a
. Put the seal ring back in
place after cleaning. You can use the
seal ring from both sides.
Do not use sharp objects for cleaning
purposes.
Clean the blades and the inserts very
carefully – they are very sharp!
Using the food processor
bowl 7
When using the food processor bowl,
always insert the required attachments
before adding ingredients.
1. Kneading
For kneading you can use the kneading
hook sor the blade n. For best results,
we recommend using the kneading
hook which is specially designed for
making yeast dough, pasta and pastries.
Yeast dough (bread/cake)
Max. 500 g flour plus other ingredients
Speed 7, 1 ½ minutes
Pour the flour into the food processor
bowl, then add the other ingredients –
except liquids.
Put on the lid 8and lock in place.
Then choose speed 7 and switch the
appliance on.
Add liquids by pouring them through
the filling tube of the lid while the motor
is running.
When kneading with the blade n, do
not add ingredients like raisins, candied
peel, almonds, etc. which are not
supposed to be cut. These have to be
added manually after having taken the
kneaded dough out of the food proces-
sor bowl.
Pasta dough
Max. 500 g flour plus other ingredients
Speed 7, 1 ½ minutes
Pour the flour into the food processor
bowl, then add the other ingredients –
except liquids.
Pour the required amount of liquid
through the filling tube in the lid when
the motor is running.
Do not add any liquid after the dough
has formed into a ball as then the liquid
will no longer be absorbed evently.
Pastries
Max. 500 g flour plus other ingredients
Speed 7, approx. 1 minute
Pour flour into the food processor bowl,
then add the other ingredients. For best
results, be butter used must not be too
hard, nor too soft.
Put on the lid 8and lock in place.
Choose speed 7 and switch on the
appliance.
Stop kneading the dough shortly after
a ball has formed. Otherwise the pastry
dough will become too soft.
Then turn the lid clockwise guiding its
nose into the safety lock opening of the
motor block 1until it audibly snaps in
place.

6
2. Mixing
For mixing cake dough or sponges
use the blade n.
The kneading hook sis not suitable for
mixing cake doughs or sponges.
Max. 500 g flour plus other ingredients
Cake mixture
(2 methods) Speed / Time
a) Cream butter with
sugar end eggs 6 / ca. 1 min
pour in milk and 6 / ca. 15 secs
carefully fold in 15 / ca. 10-15 x
flour with pulse «»
mode.
b) Pour all ingredients
except liquids into
the food processor
bowl. 15 / ca. 1 min
Add required liquids through the
filling tube of the lid while the motor
is running. Finally add ingredients like
raisins manually.
Sponge Speed/Time
Cream eggs and
water (if required) 15 / ca. 2 mins
and sugar 15 / ca. 4 mins
fold in flour with
pulse mode 8 / 5 x «»
add cocoa powder 8 / 3 x «»
3. Blending
Use the blade nfor blending soups,
shakes, etc.
Maximum capacity 2 l
Speed 10
(otherwise the bowl may overflow)
For milk-shakes, pour coarsely chopped
fruit into the food processor bowl.
Put on the lid 8and lock in place.
With speed 15, blend fruit first, then add
liquid at speed 10 and finish blending.
When blending milk, please not that it
will froth. Use smaller Quantities.
4. Chopping
Chopping in the food processor bowl
with the blade n
Note: For processing larger quantities,
use the food processor bowl 7with
blade n. For processing smaller quanti-
ties, we recommend to use the chopper
bowl jwith blade l.
• Place the insert you want to use into
the insert carrier oas shown in (D)
and snap into position. In order to
remove the insert, push up the insert
end that protrudes at the bottom of
the insert carrier.
5. Slicing & shredding
Product Max. Preparation Speed Mode Time/pulses
amount
Hard bread 4 quartered 15 I 45 secs
rolls
Ice cubes 28 whole 15 I 1 minute (snow)
Apples 700 g quartered 8 I 15 secs
Chocolate 400 g broken 15 I coarse 15 secs
cool fine 30 secs
Eggs 8 whole 6 8 x
Cheese (soft) 400 g 3-cm cubes 15 I 20 secs
Cheese (hard) 700 g 3-cm cubes 15 I 60-70 secs
Meat 700 g in cubes 15 I 40 secs
Carrots 700 g in pieces 15 I 10 secs
Onions 700 g quartered 15 10 - 13 x
Processing examples
The processing times are approximate and depend on the quality, the amount of
food to be processed and the required degree of fineness.
D
a
E
F
1
2
• Put the assembled slicer/shredder
onto the drive shaft of the food pro-
cessor bowl (E).
• Put on the lid 8and lock in place. Set
the speed and fill the food to be pro-
cessed into the filling tube while the
motor is switched off. Refilling should
be done with the motor switched off.
• Never reach into the filling tube when
the motor is running. Always use the
pusher 9(F).
N.B.: When processing juicy or soft
food, you will obtain better results at a
lower speed. Hard food should be
processed at a higher speed. Do not
overload the food processor bowl.
Fine slicing insert – a p
Speed 1 - 2
Processing examples: cucumbers,
cabbage, raw potatoes, carrots, onions,
radishes.

7
Blending
Product Preparation Speed Switch Time/pulses
position
Mixed drinks Chop fruit before approx.
processing. Add milk. 15 l 30 seconds
Baby food Chopped 15 10 x
(e.g. fruit, I 10 seconds
vegetable)
Mayonnaise Blend 1 egg, seasoning, 15 l 30-45 seconds
mustard and vinegar.
Slowly pour in oil
through lid opening.
Tartar Blend 1 egg, seasoning, 15 I 30-45 seconds
mustard and vinegar.
Slowly pour in oil
through lid opening.
Add quartered egg
and vinegar. 6 3-5 x
Avocado Chop 1 clove garlic, 15 I 5 seconds
add 2 ripe avocados
(quartered, w/o stone),
1 tbsp. lemon juice,
1 tbsp. olive oil,
150 ml yogurt,
½ tsp. sugar,
salt, pepper. 15 l ca. 45 seconds
The blade lcan be used for chopping,
blending, puréeing and mixing smaller
quantities. The chopper bowl is perfectly
suited for preparing mousse, pastes or
dips.
Maximum capacity: 750 ml liquid.
Caution:
The blade lis extremely sharp.
Important: The maximum processing
time in the chopper bowl is 1 minute.
Liquids can be processed longer.
Chocolate, hard spices and coffee beans
may not be chopped.
Whith the motor switched off, insert the
blade lin the chopper bowl j, then
place all ingredients into the chopper
bowl.
Liquids can be poured through the
opening in the lid qwhen the motor is
running.
Put the lid qwith the seal ring ß
11a
onto
the chopper bowl and close it as
described earlier. After use, always
remove the blade from the chopper bowl
first and then empty the processed food.
When blending milk, please note that it
will froth. Use smaller quantities.
Using the chopper bowl j
Chopping
Product Max. Preparation Speed Switch Time/pulses
amount position
Carrots 150 g in pieces 6 7 x
Onions 100 g / quartered 6 6-8 x
1 ½ onion
Parsley 30 g / withouth 15 l 5-10 seconds
½ bunch stems
Garlic 1 clove whole 15 I 5 seconds
Meat (lean) 250 g quartered 15 l 15 seconds
Processing examples
The processing times are approximate and depend on the quality and amount of
food to be processed and the degree of fineness required.
Fine shredding insert – b q
Speed 3 - 6
Processing examples: cheese (soft to
medium), cucumbers, carrots, raw pota-
toes, apples.
French-fries system r
Place the French-fries system onto the
drive shaft, put on the lid 8and lock in
place. For best results, place 3 - 4 pota-
toes (depending on size) in the filling
tube of the lid 8while the motor is
switched off.
Set speed to 1 - 2 and switch on the
appliance. Before filling in a new load,
switch the motor off. Use the pusher 9
to apply slight pressure when pushing
the potatoes into the filling tube.
6. Whipping with the
whipping attachment t
Speed/Time
Whipping sponges
Max. 280-300 g flour
plus ingredients
Cream eggs and
water (if required) 5 / ca. 2 mins
add sugar 5 / ca. 2 mins
fold in flour 1 / ca. 30 secs
Whipping egg-whites
Min.: 2 egg-whites 4-5 / ca. 4 mins
Max.: 6 egg-whites 4-5 / ca. 6 mins
Whipping cream
Min.: 0.15-0.2 l 2/ca. 1-2 mins
Max.: 0.4 l 2/ca. 3.5-4 mins
Before whipping sterilized cream, keep
the cream cool for several hours (at 4 °C
approx.).

8
Speed Switch Time
position
Pancake mixture
240 g flour Mix the flour, eggs, 6 I 45-60 sec.
375 ml milk salt and half of the milk,
2 eggs add rest of the milk
salt while te motor is
running.
Whipping cream
200 ml cream 6 l 30 secs.
Mixing smaller dough quantities
The chopper bowl is only suitable for processing the following dough type;
the recipe reflects maximum quantities:
Vanilla-Honey-Prunes
(as a pancake stuffing or spread)
(use the chopper bowl j, speed 15)
Fill 100 g creamy honey and 100 g
prunes into the chopper bowl and chop
10 seconds, then add 50 ml water
(vanilla-flavoured) and resume chopping
for 3 seconds.
Cleaning
All parts can be cleaned in the dish-
washer at temperatures up to 65 °C.
Pulp and other residues should not
become dry before the appliance is
cleaned. The appliance may discolour
when processing food with high degree
of pigments (e.g. carrots); use vegetable
oil to clean it, before cleaning with
detergents or in the dishwasher.
Please do not dispose of the
product in the household waste at
the end of its useful life. Disposal
can take place at a Braun Service
Centre or at appropriate collection
points provided in your country.
Subject to change without notice.

9

10