Braun 58424 Assembly instructions
Visit our website at: http://www.harborfreight.com
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 21h
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright©2021 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for a s s e m b l y a n d ser v i c e m a y n o t b e inc l u d e d .
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 For technical questions, please call 1-888-866-5797. Item 58424
Specifications
Battery Li-ion
Battery Rating 7.4V, 5200mAh
Charge Time 2 h 45 m
Run Time 4 h (high)
13 h 30 m (low)
Kelvin Rating 7000K
IMPORTANT SAFETY INFORMATION
To prevent serious injury, FIRE, and EXPLOSION:
1. Keep dry. Do not open, drop, short-circuit,
incinerate, expose to temperatures higher
than 140° F, or charge/use if damaged.
2. Only use included charging adaptors. Other
adaptors may damage tool or cause fire.
3. Do not submerge Light.
4. Do not operate in explosive atmospheres, such as in
the presence of flammable liquids, gases, or dust.
5. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
6. Not a toy. Keep out of reach of children.
7. Contains Li-Ion battery. Battery must be recycled
or disposed of properly. Do not open, crush,
heat above 140° F (for Li-Ion) or incinerate.
Page 3For technical questions, please call 1-888-866-5797.Item 58424
Charging Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Insert the end of the Adaptor cord into the
Charging Jack, located in one of the handgrips.
2. Plug the AC/DC Adaptor into a 120V outlet.
3. The Charge Light Indicator will light up during
charging. After approximately 2 h 45 m, all four
lights on the Charge Light Indicator should be
lit up, indicating the Work Light is fully charged
and ready for use. Unplug the Adaptor.
NOTE: Do not leave the Battery in a discharged
state. Charge the Battery every 3 months if the
Work Light is not in use. This will keep the Battery
from wearing down and add to its life. Do not charge
the Work Light at temperatures below 40° F.
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
NOTE: Before using Work Light for the
first time, fully charge the Battery.
1. Press On/Off Switch once to turn Light on.
Light will turn on in low brightness mode.
2. Press On/Off Switch a second time
to change to high brightness.
3. Press On/Off Switch a third time to turn the Light off.
4. Length can be adjusted by pulling on the hooks.
Maximum length is 85″. Use hooks to attach Light
to desired position, such as a lifted car hood.
5. When Light is in place, Light can be rotated
to desired position by twisting. Light will
click into place as you rotate it.
6. When finished using the Work Light,
store indoors away from children.
Battery Removal
1. Contains Li-Ion Battery. Battery must be
recycled or disposed of properly.
2. To remove Battery, make sure Light is
off and disconnected from Adaptor.
3. Open Housing to access Battery.
Note: Light is not user serviceable, only
open housing to remove Battery.
4. Cut wires attached to Battery. Battery
may be adhered to housing. Carefully
pry Battery out of housing.
26541 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability
standards, and warrants to the original purchaser that this product is free from defects in materials
and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside
our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,
special or consequential damages arising from the use of our product. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion
may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Replacement parts are not available for this item.
Note: Reference UPC 193175438997.
Other Braun Work Light manuals
