BREEO Transit Case Y Series User manual

WWW.BREEO.CO
[phone]
[e-mail]
© 2023 Breeo LLC. All rights reserved. 3/23
Breeo, LLC warrants to the original purchaser that the Y Series Transit Case is free from workmanship and material defects for a
period of one (1) year from invoice/receipt date. This product is covered by this limited warranty. Breeo, LLC’s liability and obligation
is limited to repair or replacement of the product at their discretion free of charge, excluding any applicable shipping and handling
fees. If the product being warranted has been discontinued, the replacement product will be of equal or similar value. Altering any
Breeo product, or using the product in any way other than the intended use, will void this warranty.
Claim Process: The purchaser must provide Breeo, LLC with invoice/receipt of purchase and photos of the product’s defects for
evaluation. Claims must be submitted within one (1) year from invoice/receipt date. Upon approval of claim, Breeo, LLC will issue
a return for repair, or return for exchange of the defective product
free of charge, excluding any applicable shipping and handling fees.
Exclusions: This warranty does not cover damage or product failure caused by:
• Normal wear and tear
• Accident, misuse, negligence, tampering, modifications, act of war, overloading
• Improper attachment, improper maintenance, or failure to maintain.
Breeo, LLC is held harmless for any injury or death caused by the misuse of this product.
This warranty does not cover damage caused by proper or improper use of our products to any surrounding surfaces, structures,
or furnishings.
Notice: This warranty gives you specific legal rights providing said product is put to its proper designated use.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTY
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. NO ORAL AGREEMENT, GUARANTEE, PROMISE,
REPRESENTATION OR WARRANTY SHALL BE BINDING. IN NO EVENT WILL BREEO, LLC BE LIABLE FOR ANY SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES EVEN IF BREEO, LLC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
AND EVEN IF BREEO, LLC HAS KNOWLEDGE THAT FAILURE TO PERFORM COULD CAUSE CONSEQUENTIAL ECONOMIC LOSSES.
IN ANY EVENT, CUMULATIVE DAMAGES FOR BREACH OF THIS WARRANTY WILL BE LIMITED TO THE AMOUNT ACTUALLY PAID
TO BREEO, LLC FOR THE PRODUCT. THIS PARAGRAPH SHALL APPLY TO ALL ACTIONS RELATED TO THE PRODUCT, WHETHER
BASED ON TORT, CONTRACT OR OTHER THEORIES. THE PURCHASER ACKNOWLEDGES THAT THIS PARAGRAPH ALLOCATES
THE RISK OF PRODUCT FAILURE BETWEEN BREEO, LLC AND THE PURCHASER, AND THAT THIS ALLOCATION IS REFLECTED IN
THE PRICE PAID.
TRANSIT CASE

BUILT-IN FEATURES HOW TO USE
WARNINGCLEANING
EASY
CLEAN
Heavy-duty
vinyl interior for
easy cleaning.
COMPATIBLE
With Y Series Lid.
TOUGH
MATERIAL
Rugged
SunMaster™
fabric sides.
DESIGNED FOR
Y SERIES FIRE PIT
Opening on side for access
to Y Series Fire Pit handle.
VERSATILE
D-RINGS
Attached D rings (four) for
strapping down—also work
as bottle openers.
NON-SKID
Slip-resistant
when packed.
HANDLES
Attached nylon
web handles (two).
PROTECTION
Padded for protection and sound
dampening. Water-resistant lid
and bottom.
Dump out any ash or debris that may have
gathered inside the case. Use a damp cloth
to wipe out any residual ash or debris left
behind. You can also use a damp cloth to
clean the outer surface of the case.
For use with Breeo Y Series Smokeless Fire
Pit only. Always make sure the fire pit is cool
to the touch before placing it in the case. Do
not place the fire pit into case while it has
hot coals inside or if still hot. Fabric of the
case is not flame or heat proof.
Make sure the lid of the case is completely
closed before transport.
STEP 1
PREP
Set the case on a flat surface with the lid
facing up. Fully unzip lid of case and open.
STEP 2
STOW
Make sure the Y Series Fire Pit is
completely cooled down. Adjust legs of
the fire pit to STOW setting. Fold handle on
the fire pit all the way down.
STEP 3
STORE
Align handle on fire pit with handle
opening on case. Place the fire pit right
side up into the case. Make sure the
handle of the fire pit can be folded out of
the opening in the side of the case.
STEP 4
LOAD
Insert any items such as gloves, wood
pellets, fire starters, tinder, etc. you want to
store inside the fire pit (we suggest avoiding
heavy, clunky items that may shift and rattle
during transport).
STEP 5
GO
Close the lid and fully zipper shut. Use the
exposed handle of the fire pit or the two
handles on the case for transport. Use
attached D rings to strap down/secure if
needed. Make sure the handle on the
Y Series Fire Pit is folded down and out
of the way when packing.