Bresser 7002580 User manual

Weather Station ·
WIFI Colour Weather Station 5in1
EN Instruction manual

DE
Besuchen Sie unsere Website über den folgenden QR Code oder Weblink um weitere Informationen
zu diesem Produkt oder die verfügbaren Übersetzungen dieser Anleitung zu finden.
EN
Visit our website via the following QR Code or web link to find further information on this product or
the available translations of these instructions.
FR
Si vous souhaitez obtenir plus d’informations concernant ce produit ou rechercher ce mode
d’emploi en d’autres langues, rendez-vous sur notre site Internet en utilisant le code QR ou le lien
correspondant.
NL
Bezoek onze internetpagina via de volgende QR-code of weblink, voor meer informatie over dit
product of de beschikbare vertalingen van deze gebruiksaanwijzing.
ES
¿Desearíarecibirunasinstruccionesdeusocompletassobreesteproductoenunidiomadeterminado?
Entonces visite nuestra página web utilizando el siguiente enlace (código QR) para ver las versioneAs
disponibles.
IT
Desidera ricevere informazioni esaustive su questo prodotto in una lingua specifica? Venga a
visitare il nostro sito Web al seguente link (codice QR Code) per conoscere le versioni disponibili.
www.bresser.de/P7002580
www.bresser.de/warranty_terms
GARANTIE · WARRANTY · GARANTÍA · GARANZIA
APPDOWNLOAD: APPDOWNLOAD:
Weather Underground is a registered trademark of The Weather Channel, LLC. both in the United States and internationally. The Weather
Underground Logo is a trademark of Weather Underground, LLC. Find out more about Weather Underground at www.wunderground.com
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.,
registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc.

3
Contents
1 Imprint .............................................................................................................................................................4
2 Validity information ........................................................................................................................................4
3 Features...........................................................................................................................................................4
4 About this Instruction Manual.......................................................................................................................5
5 General safety instructions ...........................................................................................................................5
6 Parts overview Base station..........................................................................................................................7
7 Parts overview Multisensor ...........................................................................................................................8
8 Scope of delivery............................................................................................................................................8
9 Screen display ................................................................................................................................................9
10 Before starting operation...............................................................................................................................9
11 First Steps .....................................................................................................................................................10
12 Setting up power supply..............................................................................................................................10
13 Attaching rubber pads .................................................................................................................................11
14 Assembling and installing the multifunctional remote sensor ................................................................11
15 Signal transmission .....................................................................................................................................12
16 Setting up an user account for Weather Underground (optional) ...........................................................12
17 Setting up an user account for weathercloud (optional) ..........................................................................12
18 Configuration / Setting up a WI-FI connection ..........................................................................................13
19 Automatic time setting.................................................................................................................................14
20 Manual time setting ......................................................................................................................................14
21 Time zone setting .........................................................................................................................................14
22 Manual measurement display .....................................................................................................................14
23 Technical data...............................................................................................................................................14
24 EC Declaration of Conformity .....................................................................................................................15
25 Disposal.........................................................................................................................................................15

4 / 20
1 Imprint
Bresser GmbH
Gutenbergstr. 2
46414 Rhede
Germany
http://www.bresser.de
If you wish to submit a warranty claim or service request, please refer to the “Warranty” and “Service”
information in this document. Please be aware that any requests or submissions sent directly to the
manufacturer cannot be processed.
Errors excepted. Subject to technical modifications.
© 2019 Bresser GmbH
All rights reserved.
Reproduction of this document, including extracts, in any form (photocopied, printed etc.) or the use
and distribution of this document by electronic means (image file, website etc.) is not permitted without
the prior written consent of the manufacturer.
The terms and brand names of the respective companies used in this document are protected by
brand, patent or product law in Germany, the European Union and/or other countries.
2 Validity information
This documentation is valid for the products with the article numbers listed below:
7002580
Manual version: v0519
Manual description:
Manual_7002580_WIFI-Colour-Weather-Station-5in1_en_BRESSER_v052019a
With any service inquiries, please state these information.
3 Features
• Measurement of Rainfall
• Measurement of wind speed
• Measurement of wind direction
• Radio-controlled clock with DCF signal reception and display
• Alarm with snooze function
• Outdoor temperature alarm (frost warning)
• Outdoor temperature (in °C or °F)
• Indoor temperature (in °C or °F)
• Humidity indoor/outdoor
• Atmospheric pressure
• SINCE function to display the total rainfall from a customized point in time.
• Highest and lowest value display
• Maximum/Minimum value memory
• Colour display
• Backlight

5 / 20
4 About this Instruction Manual
NOTICE
These operating instructions are to be considered a component of the device.
Please read the safety instructions and the operating instructions carefully before use.
Keep these instructions for renewed use at a later date. When the device is sold or given to someone
else, the instruction manual must be provided to the new owner/user of the product.
5 General safety instructions
DANGER
Risk of electric shock
This device has electronic parts operated via a power source (power supply and/or batteries). Im-
proper use of this product can cause an electric shock. An electric shock can cause serious or poten-
tially fatal injuries. The following safety information must be observed at all times.
• Children must only use the device under adult supervision! Only use the device as described in the
manual; otherwise, you run the risk of an electric shock.
• Disconnect the device from the power supply by pulling the power plug when it is not used or in
case of longer interruption of operation and before starting any work on maintenance and cleaning.
• Position your device so that it can be disconnected from the power supply at any time. The power
socket should be installed near the device and should be easily accessible as the mains cable
plug is used to disconnect the device from the power supply.
• To disconnect the device from the power supply, always pull on the plug. Never pull on the cable.
• Before starting up the device, check the device, the cables and the connections for signs of dam-
age.
• Never use a damaged device or a device with damaged live parts. Damaged parts must be imme-
diately replaced by an authorised service company.
• Only use the device in complete dry environment and do not touch it with wet or moist parts of
your body.
DANGER
Risk of suffocation
Improper use of this product can result in suffocation. This is particularly dangerous for children. The
following safety information must be observed at all times.
• Keep packaging materials (plastic bags, rubber bands etc.) away from children. They can cause
suffocation.
• This product contains small parts that could be swallowed by children. There is a risk of choking!
DANGER
Risk of explosion
Improper use of this product can cause an explosion. The following safety information must be ob-
served at all times to prevent an explosion.

6 / 20
• Do not expose the device to high temperatures. Use only the supplied power supply or the recom-
mended batteries. Do not short-circuit the device or batteries or throw them into a fire! Excessive
heat or improper handling could trigger a short circuit, a fire, or an explosion.
NOTICE
Risk of damage to property
Improper handling can result in damage to the device and/or to the accessories. Always observe the
following safety information when using the device.
• Never disassemble the device. In the event of a fault, please contact your specialist retailer. The
specialist retailer will contact the service centre and send the device for repair if necessary.
• Do not expose this device to higher temperatures and protect it from water and high humidity.
• Do not immerse the unit in water!
• Protect the device from severe shocks!
• For this device only use accessories and spare parts that comply with the technical information.
• Use only the recommended batteries. Always replace weak or empty batteries with a new, com-
plete set of batteries at full capacity. Do not use batteries from different brands or with different ca-
pacities. Remove the batteries from the unit if it has not been used for a long time.
• Never use rechargeable batteries.
NOTICE
Risk of voltage damage!
The manufacturer is not liable for voltage damage due to improperly inserted batteries or through the
use of an improper power adapter!

7 / 20
6 Parts overview Base station
WI-FI
SENSOR RESETREFRESH
MAX/MINHISTORYCHA NNEL
BARO
UNIT
1
2
3
4
876
5
924
25 23 22 21 20 19
17
16
1510
18
13
12 1411
18
26
A
B
C
Illustration1: All parts of the base station
1 SNOOZE button (snooze function) 2 Colour display
3 RAIN button (display of various precipitation
values)
4 BARO button (display of different atmospheric
pressure values)
5 INDEX button (display change between 'feels
like' temperature, dew point, heat index and
wind chill index)
6 WIND button (display change between aver-
age and current gust)
7 MAX/MIN button (switch between highest, low-
est or current value display)
8 HISTORY button (retrieve measurements for
the past 24 hours)
9 CHANNEL button (channel selection) 10 CLOCK button (manual time setting)
11 ALARM button (Alarm setting) 12 ALERT button (e.g. set temperature alarm)
13 Wall mount 14 DOWN button (Value setting downwards)
15 UP button (Value setting upwards) 16 RESET button (reset all settings)
17 HI/LO/OFF slide control (setting or turning off
backlight)
18 Stand, removable
19 REFRESH button (refreshing data manually) 20 SENSOR / WI-FI button (start manual sensor
search or activate / deactivate WI-FI)
21 Battery compartment (cover) 22 BARO UNIT button (change of atmospheric
pressure measurement unit)
23 °C/°F button (display change between °C or
°F)
24 12/24 button (display change between 12 and
24 hours mode)
25 Power supply socket 26 Power adapter

8 / 20
7 Parts overview Multisensor
1
34
5
6
9
8
7
13
10
12
11
E
D
F
G
7
8
12
2
Illustration2: All parts of the multisensor
1 Rain gauge 2 Antenna
3 Circular level 4 Wind cups (wind speed)
5 wind vane (wind direction) 6 Thermo-Hygrometer
7 Pipe clamp 8 Mounting shoe
9 Mounting bar 10 Battery compartment (cover)
11 RESET button 12 LED function indicator
13 Mounting screws with nuts
8 Scope of delivery
Base station (A), power adapter (B), stand (C), multifunctional outdoor sensor (D), mounting bar (E),
mounting shoe (F), pipe clamp (G), screws, instruction manual
Also required (not included):3 pcs. of 1.5V AA type batteries (outdoor sensor), 1 pc. of 3V CR2032
battery (base station)

9 / 20
9 Screen display
2
6
7
9
10
17
16 14 11
18
19
22
1 3
15
20
21
5
13 12
8
4
Illustration3: Screen display
1 Wind speed 2 Wind direction
3 Strength of receiving signal (outdoor sensor) 4 Outdoor temperature
5 Temperature alarm outdoors enabled 6 Humidity outdoors
7 Atmospheric pressure 8 Precipitation alarm enabled
9 Precipitation quantity 10 Date
11 WI-FI synchronisation 12 Frost warning enabled
13 Alarm enabled 14 Current time
15 'Feels like' temperature 16 Moon phase
17 Weekday 18 Graphical weather trend display
19 Humidity indoors 20 Comfort indicator (Clima)
21 Temperature alarm indoors enabled 22 Indoor temperature
10 Before starting operation
NOTICE
Avoid connectivity disruptions!
To avoid connectivity disruptions between the devices, consider the following points before starting
operation.
1. Place base station (receiver) and remote sensor (sender) together as close as possible.
2. Set up power supply for the base station and wait until the indoor temperature is displayed.

10 / 20
3. Set up power supply for the remote sensor.
4. Position the base station and the remote sensor within the effective transmission range.
5. Ensure that the base station and remote sensor are assigned to the same channel.
When changing batteries always change batteries in the main unit as well as all remote units and re-
place them in the correct order, so the remote connection can be re-established. If either of the
devices is mains-powered, the power supply must be disconnected for a short moment also for this
device when exchanging the batteries. If batteries are exchanged in only one of the devices (i.e. the
remote sensor) the signal can’t be received or can’t be received correctly.
Note, that the effective range is vastly affected by building materials and position of the main and re-
mote units. Due to external influences (various RC devices and other sources of interference), the
maximum distance can be greatly reduced. In such cases we suggest to position the main unit and the
remote sensor at other places. Sometimes all it takes is a relocation of one of these components of a
few inches!
11 First Steps
Follow the bullet points in order, to ensure a successful setup.
• Setting up power supply (base station and wireless sensor)
• Mount the remote sensor
• The base station is now in AP mode (LED flashes green) and ready for initial setup.
• Create a Weather Underground account and add the station to your account ("My Profile" / "Add
Weather station"). Here you will receive a station ID and a password, which will be needed in the next
step.
• Setting up the base station (Estabish Wi-Fi / Router connection)
• Viewing weather data via web, mobile or tablet
12 Setting up power supply
Base station
1. Insert the DC connector into the connection socket of the base station.
2. Insert the mains plug into the power outlet.
3. The device is energized directly.
Remote sensor
4. Loosen the screw at the battery compartment cover with a small Philips screwdriver and remove
the cover.
5. Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct.
6. Replace the cover and retighten it with the screw.

11 / 20
13 Attaching rubber pads
Attach the supplied self-adhesive rubber pads to the clamps as shown to ensure a firmer fitting of the
mounting rod.
14 Assembling and installing the multifunctional
remote sensor
Depending on the desired location, the remote sensor can be installed in two different ways.
NOTICE!During the assembly make sure that the upper part of the wind vanve is minimum 1.5
meters off the ground. Use the circular level in the sensor head to ensure a level installation. The
windmill must point to the North.
Assembly on a vertical or horizontal wooden element
1. Slide one end of the assembly bar into the aperture below the sensor head.
2. Slide one screw through the bore hole and put on the nut on the opposite site. Tighten the screw
connection by hand.
3. Depending on the desired orientation, slide the opposite end of the assembly bar into the aperture
for vertical or horizontal mounting of the assembly base.
4. Slide another screw through the bore hole of the assembly base and put on the nut on the oppos-
ite site. Tighten the screw connection by hand.
5. Place the assembly base with its bottom site first on a wooden element. Use 4 wood screws to
tighten it.
Assembly on a vertical or horizontal tube

12 / 20
6. Repeat steps 1 to 4 as before.
7. Place the assembly base with its bottom site first on the tube. Push the tube bracket against the
tube from the opposite site.
8. Slide 4 screws through the bore holes of the assemby base and through the bore holes of the tube
bracket on the other site.
9. Put on the 4 nuts and tighten the screw connection by hand.
15 Signal transmission
The base station will automatically connect to the multi outdoor sensor and (if available) to other wire-
less sensors.You can also press the Wi-Fi / SENSOR button to start a manual search for the remote
sensors. When the connection is successful, the outdoor symbol (OUT) and/or the channel will be
shown on the display.
Connection status display
Connection status Screen display
Good signal Reception symbol
Sensor searching mode Reception symbolcon flashes
No signal over 48 hours 'Er' (Error) is shown
Sensors low battery with good signal Battery symbol is shown
16 Setting up an user account for Weather
Underground (optional)
1. Enter the following web address in the address bar of the web browser for the 'Weather Under-
ground' service: https://www.wunderground.com
2. Click on 'Join' to open registration page.
3. Type in the personal user data and click on ‚Sign up‘.
4. Follow the further setup steps.
5. You can add your own weather station under the menu point 'Sensor Network'> 'Connect a
Weather Station'.
6. A 'Station ID' and a 'Station Key/Password' will be generated automatically by the service. They
are needed for later configuration of the weather station.
NOTICE!Use a valid e-mail address for registration. Otherwise the service can not be used.
17 Setting up an user account for weathercloud
(optional)
1. Enter the following web address for the 'weathercloud' service in the address bar of the web
browser: https://weathercloud.net
2. Type in the personal user data and click on ‚Sign up‘.
3. After registration and verification of the e-mail address chose the menue point 'Devices' in the user
account.
4. Click on the link 'Create device' under 'Your devices' and follow the instructions to add a new
device. For 'Model' chose the option 'W100 Series' under 'CCL. For 'Link type' chose the option
'Pro Weather Link'.
5. A 'weathercloud ID' and a 'Key' will be generated automatically by the service. They are needed
for later configuration of the weather station.
NOTICE!Use a valid e-mail address for registration. Otherwise the service can not be used.

13 / 20
18 Configuration / Setting up a WI-FI connection
1. If the base station has not yet been connected to a router, it will switch to AP (Access Point Mode)
mode after the first power supply. The display will show 'AP' and the symbol for WI-FI synchroniza-
tion.
2. Use a smartphone, tablet or computer to connect to Wi-Fi.
NOTICE!The respective device itself must also be equipped with a WI-FI function.
3. In the system settings of the device, switch to W-LAN or WI-FI settings and select the wireless net-
work (SSID) named 'PWS-XXXXXX'.
4. After successful connection via the address bar of the web browser, enter the IP address
'http: //192.168.1.1' to establish a connection to the settings menu of the weather station.
NOTICE!Always prepend 'http: //' to the IP address to avoid browser dependent connection er-
rors. Recommended browsers: the latest version of Chrome, Safari, Edge, Firefox or Opera.
5. Make the following settings in the settings menu:
Select 'Add Router'
to add a router manually**
Select 'ADVANCED'
to enter advanced settings menu
Select desired WI-FI router
If router is not listed, enter SSID manually
Select security type of the router (normally WAP2)
Enter password of the Router (leave field blank
if no password has been assigned)
Check to comfirm upload to Weather underground*
Enter 'Station ID' registered at Wunderground*
Enter 'Station Key' registered at Wunderground*
Check to comfirm upload to Weathercloud*
Enter 'Station ID' registered at Weathercloud*
Enter 'Station Key' registered at Weathercloud*
Select time server
Click to confirm entries
Select 'SETUP'
to enter settings menu
Select 'Search'
to search for a router
*Leave field blank if registration is not yet available and entries are to be made later.
**Manual setup requires additional router information (including e.g. IP address, SSID, etc)
Password record
(if a password was entered)
ID record
(if an ID was entered)
Key record
(if a key was entered)
ID record
(if an ID was entered)
Key record
(if a key was entered)
6. After completing the settings, the device will recognize the default WI-FI connection after each re-
start.
7. In Access Point Mode, the WI-FI / SENSOR button can be pressed for 6 seconds to restore the
previous settings.
WI-FI connection status:
WI-FI symbol is shown in the
display
WI-FI symbol flashes in the dis-
play
AP symbol flashes in the display
Connection to the WI-FI router
successful
Connection to the WI-FI router
not stable or ongoing connection
Access Point Mode enabled

14 / 20
19 Automatic time setting
Once the power supply and internet connection is established, the time and date information (UTC Co-
ordinated Universal Time) is transmitted by the internet time server automatically.
If the reception is correct, date and time are set automatically and the reception icon 'SYNC' is dis-
played.
If the time / date information has not been received or is not received correctly, proceed as follows:
1. In countries / regions whose time zone differs from the coordinated world time UTC, the time zone
must be set manually (see chapter 'Set time zone ') to show the correct time.
2. Press the REFRESH button on the base unit for about 2 seconds to re-initiate retrievement of the
Internet time information.
3. Check the W-LAN settings on the base unit for correctness and, if necessary, correct them so that
an Internet connection can be established (see chapter, Establishing a W-LAN connection).
20 Manual time setting
To set the time / date manually, first disable the reception of the time signal by pressing the RCC but-
ton for approx. 8 seconds.
1. Press and hold CLOCK SET button for approx. 3 seconds to change to time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press CLOCK SET button to confirm and continue to the next setting.
5. Settings order: time offset > daylight saving time on/off > hours > minutes > 12/24 hours mode >
year > month > day > day/month display change > time synchronization on/off > language
NOTICE!When time is set manually, the time synchronization must be deactivated.
6. Finally press the CLOCK SET button to save the settings and exit the setting mode.
NOTICE!In normal display mode, press CLOCK SET button to switch between year display and
date display. In setting mode, press CLOCK SET button for about 2 seconds to return to the nor-
mal display mode.
21 Time zone setting
To set a different time zone, proceed as follows:
1. Press and hold CLOCK SET button for approx. 3 seconds to change to time setting mode. The
current value fore the time offset flashes.
2. Press up or DOWN button to set the desired hour value (0 to 10 hours) for the time offset.
3. Finally press the CLOCK SET button for approx. 3 seconds to save the settings and exit the set-
ting mode.
22 Manual measurement display
1. Press MAX/MIN button several times to display the stored values one after another.
2. Display order: Current values > MAX (highest values) > MIN (lowest values)
3. When highest or lowest values are dsiplayed, press and hold MAX/MIN button for approx. 3
seconds to switch temperature unit display from °C to °F or reverse.
NOTICE!Saved highest and lowest values will be deleted automatically every day on 0:00!
23 Technical data
Base station

15 / 20
Main power DC 5V 1A adaptor
Type: XLJXA-E050100
Temperature measuring range -5°C – 50°C
Dimensions 79 x 157 x 41 mm (B x H x T)
Weight 130 g
Multisensor
Batteries 3x AA, 1.5V
Auxiliary power Solar panel
Maximum number of sensors 1x wireless multisensor
1x wireless indoor sensor (optional)
RF transmission frequency 868Mhz
RF Transmission range 150 m
Maximum radio-frequency < 25mW
Temperature measuring range -40°C – 60°C (-40°F – 140°F)
Barometer measuring range 540 – 1100hPa (relative range: 930 – 1050hPa)
Humidity measuring range 1 – 99%
Humidity resolution 1% HR
Rainfall measuring range 0 – 19999 mm (0 – 787.3 inch)
Wind seed measuring range 0 – 112 mph, 50 m/s, 180km/h, 97 knots
UV index range 1 – 16
Dimensions 392.2 x 326 x 144.5 mm (B x H x T)
Weight 1096g
Wi-Fi specifications
Wi-Fi Standard 802.11 b/g/n
Wi-Fi operating frequency 2.4 GHz
Supported devices Smart devices with built-in Wi-Fi AP mode (Ac-
cess point) function, PCs or laptops, android or
iOS Smartphones/Tablets.
Supported Internet browser Internet browser with HTML 5 support
24 EC Declaration of Conformity
Hereby, Bresser GmbH declares that the equipment type with item number 7002580 : is in compli-
ance with Directive: 2014/30/EU. The full text of the EU declaration of conformity is available at the
following internet address: www.bresser.de/download/7002580/CE/7002580_CE.pdf
25 Disposal
Dispose of the packaging materials properly, according to their type, such as paper or card-
board. Contact your local waste-disposal service or environmental authority for information
on the proper disposal.
Do not dispose of electronic devices in the household garbage!
As per Directive 2012/19/EC of the European Parliament on waste electrical and electronic
equipment and its adaptation into German law, used electronic devices must be collected
separately and recycled in an environmentally friendly manner.

16 / 20
Do not dispose of batteries and rechargeable batteries with the household waste. You are leg-
ally required to return used batteries and rechargeable batteries. After they are used, the bat-
teries can be returned free of charge to our point of sale or to a nearby location (for example,
retailers or municipal collecting points).
Batteries and rechargeable batteries are marked with a symbol of a crossed-out dustbin and
the chemical symbol of the pollutant. “Cd” stands for Cadmium, “Hg” stands for mercury and
“Pb” stands for lead.

DE AT CH BE
Bei Fragen zum Produkt und eventuellen
Reklamationen nehmen Sie bitte zunächst mit
dem Service-Center Kontakt auf, vorzugsweise
per E-Mail.
E-Mail: [e-mail]
Telefon*: [phone]
BRESSER GmbH
Kundenservice
Gutenbergstr. 2
46414 Rhede
Deutschland
*Lokale Rufnummer in Deutschland (Die Höhe der Gebühren je
Telefonat ist abhängig vom Tarif Ihres Telefonanbieters); Anrufe
aus dem Ausland sind mit höheren Kosten verbunden.
GB IE
Please contact the service centre first for any
questions regarding the product or claims,
preferably by e-mail.
e-mail: [email protected]
Telephone*:[phone]
BRESSER UK Ltd
Unit 1 starborough Farm,
Starborough Road, Nr Marsh Green,
Edenbridge, Kent TN8 5RB
Great Britain
*Number charged at local rates in the UK (the amount you will be
charged per phone call will depend on the tariff of your phone
provider); calls from abroad will involve higher costs.
FR BE
Si vous avez des questions concernant ce
produit ou en cas de réclamations, veuillez
prendre contact avec notre centre de services
(de préférence via e-mail).
e-mail: [e-mail]
Téléphone*: [phone]
BRESSER France SARL
Pôle d'Activités de Nicopolis
260, rue des Romarins
83170 Brignoles
France
*Prix d'un appel local depuis la France ou Belgique
Service
NL BE
Als u met betrekking tot het product vragen
of eventuele klachten heeft kunt u contact
opnemen met het service centrum (bij voorkeur
per e-mail).
e-mail: [email protected]
Teléfono*: [phone]
Folux B.V.
Smirnoffstraat 8
7903 AX Hoogeveen
Nederlands
*Het telefoonnummer wordt in het Nederland tegen lokaal tarief
in rekening gebracht. Het bedrag dat u per gesprek in rekening
gebracht zal worden, is afhankelijk van het tarief van uw telefoon
provider; gesprekken vanuit het buitenland zullen hogere kosten
met zich meebrengen.
ES CA PT
Si desea formular alguna pregunta sobre el
producto o alguna eventual reclamación, le
rogamos que se ponga en contacto con el
centro de servicio técnico (de preferencia por
e-mail).
e-mail: [email protected]
Teléfono*: [phone]
BRESSER Iberia SLU
c/Valdemorillo,1 Nave B
P.I. Ventorro del cano
28925 Alcorcón Madrid
España
*Número local de España (el importe de cada llamada telefónica
dependen de las tarifas de los distribuidores); Las llamadas des del
extranjero están ligadas a costes suplementarios.