Breville the Choc & Cino LMF200 User manual

Instruction Book - Suits all LMF200 Models
the Choc & Cino™

2
BREVILLE
RECOMMENDS
SAFETY FIRST
At Breville we are very safety
conscious. We design and
manufacture consumer
products with the safety of you,
our valued customer, foremost
in mind. In addition, we ask
that you exercise a degree of
care when using any electrical
appliance and adhere to the
following precautions.
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE
FOR FUTURE REFERENCE
• Carefully read all instructions
before operation and save for
future reference.
• Remove and safely discard
any packaging material and
promotional labels before
using the milk frother for the
first time.
• To eliminate a choking hazard
for young children, remove and
safely discard the protective
cover fitted to the power plug
of this appliance.
• Do not place the milk frother
near the edge of a bench or
table during operation.
• Do not place the appliance
on or near a hot gas burner,
electric element or where it
could touch a heated oven.
• Do not operate the appliance
on a sink drain board.
• Ensure that the surface is level,
clean and free of water.
• The milk frother is not
intended to be operated by
means of an external timer
or separate remote-control
system.
• To protect against electric
shock, do not immerse the
power base, power cord or
power plug in water or allow
moisture to come in contact
with these parts.
2 Breville Recommends Safety First
6 Components
7 Control Panel
8 Assembly
8 How to Use Your Milk Frother
10 Guide to Milk Frothing
11 Care, Cleaning & Storage
12 Hints & Tips
13 Troubleshooting
Contents

3
• Always switch the milk frother
off at the power outlet and
unplug if appliance is to be left
unattended, if not in use, before
cleaning, before attempting
to move the appliance,
disassembling, assembling and
when storing the appliance.
• The milk frother is not intended
for use by young children or
infirm persons unless they have
been adequately supervised by
a responsible person to ensure
they can use the appliance
safely.
• The milk frother has been
designed specifically for the
purpose of foaming milk and
other dairy milk alternatives
and is not intended to thicken
or heat other food substances
e.g. cream, custards, soups,
gravies.
• The milk frother is not designed
to mix a large quantity of dry
ingredients or melt large food
pieces e.g. cubed chocolate,
ground nuts, whole spices, fresh
herbs.
• The underside of the jug must
always be dry before placing
onto power base before use.
• The jug must only be used with
the power base provided. Do
not use attachments other than
those provided with the milk
frother.
• Attach the jug lid securely to
the jug before operation. Do
not open the jug lid during
operation.
• Use caution when operating
unit as heating the metal jug
surface is liable to get hot
during use.
• The heating element surface
is subject to residual heat after
use. Do not touch as it can
cause serious burn injury.
• Use caution when pouring
foamed milk from the jug after
heating as hot milk may scald
at high temperatures.
• Do not operate the appliance
without liquid. Always fill to at
least the ‘MIN’ marking and no
more than the ‘MAX’ markings
inside the jug.
• Ensure to use the correct
frothing attachment as
instructed in the instructions.
• Do not put metal or similar
items into the jug as this may
damage or affect the operation
of the unit.
• Keep the appliance and
accessories clean. Follow the
Care, Cleaning and Storage
instructions provided on
Page 11.

4
IMPORTANT SAFEGUARDS
FOR ALL ELECTRICAL
APPLIANCES
• Fully unwind the power cord
before use.
• Connect only to 230V or 240V
power outlet.
• Do not let the power cord hang
over the edge of a bench or
table, touch hot surfaces or
become knotted.
• To protect against electric
shock, do not immerse the
power cord, power plug or
appliance in water or any
other liquid, unless it is
recommended in the cleaning
instructions.
• The appliance is not
intended for use by persons
(including children) with
reduced physical, sensory
or mental capabilities, or
lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance, by a person
responsible for their safety.
• Children should be supervised
to ensure that they do not play
with the appliance.
• It is recommended to inspect
the appliance regularly. Do not
use the appliance if the power
supply cord, plug, connector or
appliance becomes damaged
in anyway. Return the entire
appliance to the nearest
authorised Breville Service
Centre for examination and/or
repair.
• Any maintenance other than
cleaning should be performed
at an authorised Breville
Service Centre.
• This appliance is for household
use only. Do not use this
appliance for other than its
intended use. Do not use in
moving vehicles or boats. Do
not use outdoors. Misuse may
cause injury.
• The installation of a residual
current device (safety switch)
is recommended to provide
additional safety protection
when using electrical
appliances. It is advisable that
a safety switch with a rated
residual operating current
not exceeding 30mA be
installed in the electrical circuit
supplying the appliance. See
your electrician for professional
advice.

5
• During electrical storms,
the appliance should be
disconnected from the power
source at the wall socket to
prevent any electrical surges
that may arise during the storm
and which may inadvertently
cause damage to the appliance
and its electronic componentry.
• Always turn the appliance to
the OFF position, switch off at
the power outlet and unplug
at the power outlet when the
appliance is not in use.
• Before cleaning, always turn the
appliance to the OFF position,
switch off at the power outlet,
unplug at the power outlet
and remove the power cord, if
detachable, from the appliance
and allow all parts to cool.
• Do not place this appliance on
or near a heat source, such as
hot plate, oven or heaters.
• Position the appliance at a
minimum distance of 20cm
away from walls, curtains and
other heat or steam sensitive
materials and provide adequate
space above and on all sides for
air circulation.
wWARNING
Always ensure frothing or
milking disc is inserted firmly
into jug before use.
wWARNING
The frothing and milking discs
are choking hazards. Children
must always be supervised
and never left unattended with
appliance.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS

6
A. Transparent Jug Lid and Lid Seal
To ensure no spillage during operation, and
act as a viewing window while in operation
B. Dishwasher-Safe Milk Jug
Stainless steel jug with inner measurement
markings and pouring spout
C. Jug Handle
For easy handling during and after
operation
D. Magnetic Frothing Disc
Froths milk for cappuccino, latte and hot
E. Magnetic Mixing Disc
Mixes hot or cold milk for flat white, chai
tea, and iced coffee
F. Heating Plate
For even heating
G. Power Base
H. Control Panel
For easy operation
Not Shown
• Milk jug shaft
• Non-slip feet
• Magnetic disc storage compartment
• Power Cord
Components
Hot Choc
Cappuccino
Cold
Latte
SELECT
START
A
C
H
G
F
B
D
E

7
A. SELECT/START button
To select the desired function and to turn
the milk frother on and off
B. HOT CHOC
To make hot milk for hot chocolate
C. COLD
To make cold or room temperature milk
froth for iced coffees
Control Panel
D. CAPPUCCINO
To make hot milk froth for cappuccinos
E. LATTE
To make hot milk froth for lattes
A
B C
D E

8
oFunctions
HOW TO USE YOUR MILK FROTHER
nNOTE
One magnetic disc may be stored using the
magnetic base storage compartment under the
milk frother. The other can be stored inside the
jug when not in use.
1. Place the milk frother on a dry, stable and
level surface. Insert the power plug into a
230V or 240V power outlet and switch on
at the power outlet. The milk frother will
beep once to indicate that it is in standby
mode.
2. Lift the milk jug using the handle to
remove from the power base and remove
the transparent lid from the milk jug.
3. Insert the mixing or frothing disc onto the
milk jug shaft of the milk jug. The magnetic
pull will secure the disc into place.
4. Pour the required amount of cold, fresh or
freshly opened milk into the milk jug and
replace the transparent lid.
aAssembly
BEFORE FIRST USE
Remove all promotional labels and packaging
materials from the milk frother. Ensure that all
parts and accessories listed are included before
discarding the packaging.
The mixing and frothing discs are packaged
separately. Remove the discs from the
packaging before cleaning.
Wash the milk jug, frothing disc, mixing disc,
lid and lid seal in warm soapy water and dry
thoroughly. Wipe exterior with a soft damp
cloth and dry thoroughly. Reassemble before
use.
wWARNING
Never immerse the power base, power cord or
power plug in water or allow moisture to come
into contact with these parts.

9
nNOTE
Refer to the Guide to Milk Frothing table on
page 10 for the disc, measurements and milk
types.
Do not exceed the MAX lines marked inside
the milk jug.
The maximum level for the frothing disc is
250ml.
The maximum level for the mixing disc is
350ml.
Hot Choc
Cappuccino
Cold
Latte
SELECT
START
5. Place the milk jug back onto the power
base. Press the button until the desired
function on the control panel is selected.
The light above the function will flash
three times, and the milk frother will start
automatically.
6. To cancel a function at any time during
operation, press the button and the milk
frother will stop automatically. To start the
function again, repeat step 5.
7. Once finished, the milk frother will stop
automatically and beep three times.
8. Carefully lift the jug off the power base
using the handle. Ensure the jug is not
placed on a table with a plastic surface as
it may scorch or melt. Lift the lid off the
jug, ensuring any steam that may escape is
safely away from the face or body. Tip the
milk into a cup or glass.
iTIP
Tip the jug slightly to the side while pouring
the milk to allow for more froth.
9. Place the milk jug back onto the power
base and allow to completely cool before
cleaning.
wWARNING
Do not place hot jug on or close to the power
cord.
wWARNING
The frothing and mixing discs are choking
hazards. Children must always be supervised
and never left unattended with the appliance.

10
GUIDE TO MILK FROTHING
FROTHING OR
MIXING DISC
TYPE ML TEMP TIME Perfect for
FROTHING DISC CAPPUCCINO 100 65-75 2 mins – 3 mins Cappuccino
250 60-70 4 mins – 5 mins
MIXING DISC CAPPUCCINO 100 75-85 2 mins – 3 mins Cappuccino
250 60-70 3 mins – 4 mins
350 60-68 5 mins – 6 mins
FROTHING DISC LATTE 100 65-75 2 mins – 3 mins Latte
250 60-70 4 mins – 5 mins
MIXING DISC LATTE 100 65-75 2 mins – 3 mins Flat White
350 60-68 5 mins – 7 mins
MIXING DISC COLD 100 NA 2 mins – 3 mins Iced Coffee /
Flavoured Milk
250 NA 2 mins – 3 mins
FROTHING DISC HOT CHOC 100 75-85** 2 mins – 3 mins Hot Chocolate
250 70-80 5 mins – 7 mins
*Temperatures and times may vary based on type of milk and function used.

11
C
Care, Cleaning
& Storage
CLEANING AFTER USE
The jug, discs and lid should be cleaned after
each use to prevent build-up of milk residue.
wWARNING
Never immerse the power base in water or any
other liquid. The underside of the jug must
always be dry before placing on power base
prior to use.
1. Switch off and unplug the power cord from
the power outlet before cleaning.
2. The jug and disc, if recently in use, will be
hot. Wait until the milk frother has cooled
down before removing both the disc from
the base of the jug, and the jug from the
power base.
3. Remove the seal from the jug lid. Wash the
jug lid, jug lid seal, jug and discs in warm,
soapy water. Rinse and dry thoroughly.
nNOTE
The milk jug can be washed in the dishwasher
(top shelf only) however, the time performance
may be affected. Wipe the exterior of the milk
frother and the heating plate, with a soft, damp
cloth and dry thoroughly before storage.
wWARNING
Do not use alkaline or abrasive cleaning
agents, steel wool or scouring pads as these
can damage the surface.
wWARNING
Surface of the jug will be hot after operation.
Do not place hot jug on heat sensitive surfaces.
STORAGE
1. Turn the power base over and secure the
frothing disc inside the magnetic disc
storage compartment.
2. Place the mixing disc inside the jug and
replace the lid.
3. Store the milk frother in an upright position.
nNOTE
Never store anything on top of the milk frother.

12
iHints and tips
• Always use cold, fresh (or freshly opened)
milk.
• For optimum frothing results, do not exceed
the MAX (250ml) marking inside the jug.
• For more froth on the hot chocolate (HOT
CHOC) function, complete function with
milk only and stir in additional ingredients
at completion. Remove excess air bubbles
from frothed milk by gently tapping jug on a
bench.
• For a silky smooth texture, swirl frothed milk
in a circular motion before pouring milk into
a cup or glass.
• Pour frothed milk promptly to avoid the milk
from separating. Frothed milk that is not used
immediately should not be reheated.

13
tTroubleshooting
PROBLEM WHAT TO DO
The milk frother does not heat when turned on. • Ensure the milk frother is plugged into the power
outlet and switched on.
• Position the jug properly onto the base.
When turned on, the indicator light lights up,
and the milk frother starts to heat, but the disc
does not work.
• Position the disc properly onto the base of the jug.
• Ensure the disc is not broken.
• Ensure nothing is in the way of the disc.
Selecting the Cappuccino, Latte or Cold function
resulting in either too little or too much froth. • Ensure the milk is still in date.
• Ensure the correct disc is being used.
• The best milk temperature to froth is between
2°C-8°C.

14
fNotes

15
fNotes

Australian Customers
Phone: [phone]
Web: www.breville.com
New Zealand Customers
Phone: [phone]
Web: www.breville.com
Breville Customer Service Centre
Breville, the Breville logo, Master Every Moment and Choc & Cino are trademarks of Breville Pty. Ltd. A.B.N. 98 000 092 928.
Copyright Breville Pty. Ltd. 2020.
Due to continued product improvement, the products illustrated/photographed in this booklet
may vary slightly from the actual product.
LMF200 ANZ – B20